flash Posted September 12, 2020 Report Posted September 12, 2020 Hello. Not quite sure if this should go into the disconnect thread. I, like others in that thread, have occasional disconnects using fsuipc7. I would have to 'exit' out of fsupic and restart it to take effect again. It would then run the com1 check. Lately though when I go to the taskbar to shut it down I find that it has already done on its own. It is no longer running. I am only using the serial version of PFC jetliner yoke and throttle quadrant plus USB CH rudder pedals. I have the latest download of fsuipc7 and also downloaded and added to the folder the PFC.dll. Below is the contents of of my fsuipc folder. I assume i don't add the PFChid file.
John Dowson Posted September 12, 2020 Report Posted September 12, 2020 38 minutes ago, flash said: Lately though when I go to the taskbar to shut it down I find that it has already done on its own. It is no longer running. Have you checked the system tray? Note also that FSUIPC7 exits automatically when MSFS shuts down if the Exit with FS option is checked (in Options menu). If that's not your issue, and you think FSUIPC7 has crashed, please show me your FSUIPC.log file, and check for a crash event in the windows event viewer. Why do you also have the pfc.dll and the pfcfsx.dll in the same folder? Try removing/renaming those - you should just need the PFCcom64.dll.
flash Posted September 12, 2020 Author Report Posted September 12, 2020 Thank you John. I have removed the extra files and will do some tests and get you an updated log file. Also, When fsuipc shuts down it is no longer in the system tray. The simulator was still running.
Cockpitbuilders Posted September 12, 2020 Report Posted September 12, 2020 I am going to add to this, because this is what I am experiencing. Today was the first day I got to experiment with the new patch, and this seems to happen often. Here is my Log. Quote ********* FSUIPC7, Version 7.0.0-Beta (8th September 2020) by John & Pete Dowson ********* Cannot open UserCfg.opt at 'C:\Users\XXX\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\UserCfg.opt' Windows 10 Home 64 Bit reported as Build 18363, Release ID: 1909 (OS 10.0) Reading options from "D:\Program Files\FSUIPC7\FSUIPC7.ini" Checking the Registrations now ... User Name="MSFS Tester" User Addr="Time Limited 311020" User WideFS Name="BLANK TO PROTECT INNOCENT" User WideFS Addr="BLANK TO PROTECT INNOCEN" FSUIPC7 Key is provided WideFS7 Key is provided 62 System time = 12/09/2020 13:44:46 78 FLT UNC path = "\\SERVER\Users\XXX\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\" 156 ------------------------------------------------------------------- 171 Registered HotKey 'InvokeFSUIPCOptionsKey' (key=0x46, modifier=0x1) 187 FS UNC path = "" Cannot open UserCfg.opt at 'C:\Users\XXX\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\UserCfg.opt' 218 ---------------------- Joystick Device Scan ----------------------- 218 Product= Arduino Leonardo 218 Manufacturer= Arduino LLC 218 Serial Number= HIDNH 218 Vendor=2341, Product=8036 (Version 1.0) 234 GUIDs returned for product: VID_2341&PID_8036: 234 GUID= {0CB38CF0-2BB5-11EA-8001-444553540000} 234 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R-32767,U-32767,V-32767,X27193,Y32767,Z30460 234 Product= FDS-FC1 234 Manufacturer= TEKWorx Limited 234 Serial Number= A00531 234 Vendor=1FD1, Product=03ED (Version 1.35) 234 GUIDs returned for product: VID_1FD1&PID_03ED: 234 GUID= {13AE15B0-2DC3-11EA-8001-444553540000} 234 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R1014,U978,V931,X1023,Y1023,Z1023 234 ------------------------------------------------------------------- 234 Device acquired for use: 234 Joystick ID = 0 (Registry okay) 234 0=Arduino Leonardo 234 0.GUID={0CB38CF0-2BB5-11EA-8001-444553540000} 234 Device acquired for use: 234 Joystick ID = 1 (Registry okay) 234 1=FDS-FC1 234 1.GUID={13AE15B0-2DC3-11EA-8001-444553540000} 234 ------------------------------------------------------------------- 250 LogOptions=00000000 00000001 3171 Simulator detected 8218 SimConnect_Open succeeded 8218 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8218 MSFS version = 11.0.282174.999 8218 Initialising SimConnect data requests now 8250 \\SERVER\Users\XXX\AppData\Roaming\Microsoft Flight Simulator\MISSIONS\Custom\CustomFlight\CustomFlight.FLT 8250 SimObjects\Airplanes\Asobo_KingAir350\aircraft.CFG 8250 User Aircraft ID 1 supplied, now being used 8296 Aircraft loaded: running normally now ... 8812 System time = 12/09/2020 13:44:55, Simulator time = 12:29:36 (16:29Z) 8828 Aircraft="Beechcraft King Air 350i Asobo" 14812 -------------------- Starting everything now ---------------------- 14812 Starting WideServer now ... 482593 LUA: "1.lua": killed 2079250 TransmitClientEvent failed! (Event=65820, Param=2268, nGroup=0, fSame=0 2079250 TransmitClientEvent failed! (Event=65821, Param=1812, nGroup=0, fSame=0 2079265 TransmitClientEvent failed! (Event=65820, Param=1936, nGroup=0, fSame=0 2079265 TransmitClientEvent failed! (Event=65821, Param=1471, nGroup=0, fSame=0 2079281 TransmitClientEvent failed! (Event=65720, Param=1, nGroup=0, fSame=0 2079281 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 2079281 TransmitClientEvent failed! (Event=65820, Param=1630, nGroup=0, fSame=0 2079281 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** Trev
John Dowson Posted September 12, 2020 Report Posted September 12, 2020 11 minutes ago, Cockpitbuilders said: am going to add to this, because this is what I am experiencing You have this problem: It is being investigated. FSUIPC7 is also crashing as there is a problem with the automatic re-connect on this failure (by default after 5 failure messages, but configurable) - this should (hopefully) be fixed in the next build.
Cockpitbuilders Posted September 12, 2020 Report Posted September 12, 2020 Thanks John, Literally FSUIPC closes completely. disappears from the system tray completely. I have tried adjusting to this TransmitErrorsReconnect=3 to see if it will help. *Here is crossing our fingers* on the next build / patch. Thanks, Trev
John Dowson Posted September 12, 2020 Report Posted September 12, 2020 You could try this version to see if it prevents the crash and if it re-connects successfully. It wont fix the original problem, the TransmitClientEvent failures, which is still under investigation:FSUIPC7.exe It if still crashes, can you show me your log again please.
Cockpitbuilders Posted September 12, 2020 Report Posted September 12, 2020 Ok thanks I will try it now Trev
Cockpitbuilders Posted September 12, 2020 Report Posted September 12, 2020 No disconnects yet! Looking good so far! Thank you. Better than it was in anycase.
flash Posted September 12, 2020 Author Report Posted September 12, 2020 Hello again John. Did a test.. started with the baron running autopilot for 90 mins. Wiggled the yoke every so often to confirm there is movement. No problems. Once on ground I switched airports and A/C (to the 747). After a few minutes I lost fsuipc in the system tray again, it was totally shut down. The log below: Using PFC serial yoke and quadrant plus ch rudder pedals. ********* FSUIPC7, Version 7.0.0-Beta (8th September 2020) by John & Pete Dowson ********* Windows 10 Home 64 Bit reported as Build 19041, Release ID: 2004 (OS 10.0) Reading options from "C:\Users\Rob1\Desktop\fsuipc7b\FSUIPC7.ini" Checking the Registrations now ... User Name="MSFS Tester" User Addr="Time Limited 311020" FSUIPC7 Key is provided WIDEFS7 not user registered, or expired 62 System time = 12/09/2020 13:51:20 62 FLT path = "C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\" 78 ------------------------------------------------------------------- 93 Registered HotKey 'InvokeFSUIPCOptionsKey' (key=0x46, modifier=0x1) 109 FS path = "C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\" 109 ---------------------- Joystick Device Scan ----------------------- 109 Product= CH Pro Pedals USB Rudder Pedals 109 Manufacturer= CH Products 109 Vendor=068E, Product=0501 (Version 2.35) 156 GUIDs returned for product: VID_068E&PID_0501: 156 GUID= {B10EEB80-F10E-11E6-8001-444553540000} 156 Details: Btns=1, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X255,Y255,Z255 156 ------------------------------------------------------------------- 171 Device acquired for use: 171 Joystick ID = 0 (Registry okay) 171 0=CH Pro Pedals USB Rudder Pedals 171 0.GUID={B10EEB80-F10E-11E6-8001-444553540000} 171 ------------------------------------------------------------------- 187 LogOptions=00000000 00000001 218 Loaded PFCcom64.DLL okay! 3078 Simulator detected 8171 SimConnect_Open succeeded 8171 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8171 MSFS version = 11.0.282174.999 8171 Initialising SimConnect data requests now 8187 flights\other\MainMenu.FLT 8187 SimObjects\Airplanes\Asobo_B787_10\aircraft.CFG 8203 User Aircraft ID 1 supplied, now being used 8234 Aircraft loaded: running normally now ... 8640 System time = 12/09/2020 13:51:28, Simulator time = 17:49:41 (17:49Z) 8640 Aircraft="Boeing 787-10 Asobo" 16625 -------------------- Starting everything now ---------------------- 225343 C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Official\OneStore\asobo-aircraft-baron-g58\SimObjects\Airplanes\Asobo_Baron_G58\aircraft.CFG 225343 Sim stopped: average frame rate for last 217 secs = 59.9 fps 225343 Max AI traffic was 0 aircraft 225343 ------------------------------------------------------------------- 225953 Aircraft="Asobo Baron G58" 228515 Planned flight from KOPN to KEVB 228515 C:\USERS\ROB1\APPDATA\LOCAL\PACKAGES\MICROSOFT.FLIGHTSIMULATOR_8WEKYB3D8BBWE\LOCALSTATE\MISSIONS\CUSTOM\CUSTOMFLIGHT\CUSTOMFLIGHT.PLN 228843 C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\MISSIONS\Custom\CustomFlight\CustomFlight.FLT 624437 ---------------------- Joystick Device Scan ----------------------- 624437 Product= CH Pro Pedals USB Rudder Pedals 624453 Manufacturer= CH Products 624453 Vendor=068E, Product=0501 (Version 2.35) 624453 GUIDs returned for product: VID_068E&PID_0501: 624453 GUID= {B10EEB80-F10E-11E6-8001-444553540000} 624453 Details: Btns=1, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X255,Y255,Z255 624453 ------------------------------------------------------------------- 624453 Device acquired for use: 624453 Joystick ID = 0 (Registry okay) 624453 0=CH Pro Pedals USB Rudder Pedals 624453 0.GUID={B10EEB80-F10E-11E6-8001-444553540000} 624453 ------------------------------------------------------------------- 5497375 **** Restarting traffic scanning due to non-reception **** 7116078 Sim stopped: average frame rate for last 6873 secs = 59.6 fps 7116078 Max AI traffic was 87 aircraft 7116078 ------------------------------------------------------------------- 7120359 flights\other\MainMenu.FLT 7168312 C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalCache\Packages\Community\liveries-747\SimObjects\Airplanes\Asobo_B747_8i\aircraft.CFG 7168312 Sim stopped: average frame rate for last 41 secs = 58.8 fps 7168312 Max AI traffic was 1 aircraft 7168312 ------------------------------------------------------------------- 7169296 Aircraft="Boeing 747-8i Asobo" 7171796 C:\Users\Rob1\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\MISSIONS\Custom\CustomFlight\CustomFlight.FLT 7214531 **** Restarting traffic scanning due to non-reception **** 8007031 TransmitClientEvent failed! (Event=65763, Param=0, nGroup=0, fSame=0 8007031 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 8007281 SimConnect_Open succeeded 8007281 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8007281 MSFS version = 11.0.282174.999 8007281 Initialising SimConnect data requests now 8007281 User Aircraft ID 1 supplied, now being used 8007296 SimObjects\Airplanes\Asobo_B747_8i\aircraft.CFG 8007359 System time = 12/09/2020 16:04:47, Simulator time = 16:04:50 (20:04Z) 8023531 TransmitClientEvent failed! (Event=65763, Param=547, nGroup=0, fSame=0 8023531 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 8023546 TransmitClientEvent failed! (Event=65763, Param=6579, nGroup=0, fSame=0 8023546 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 8023781 SimConnect_Open succeeded 8023781 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 8023781 MSFS version = 11.0.282174.999 8023781 Initialising SimConnect data requests now 8023781 User Aircraft ID 1 supplied, now being used
Pete Dowson Posted September 12, 2020 Report Posted September 12, 2020 In all cases of FSUIPC7 apparently terminating (crashing), please always look in the Windows Event Viewer to see if any crash information was captured. To do this search for and execute "Event Viewer" via the task bar bottom left, then look in "Windows Logs -- Application" for Errors (red icon) mentioning FSUIPC specifically. Pete
Cockpitbuilders Posted September 13, 2020 Report Posted September 13, 2020 John, I just wanted to Thank you for the new version today. Just completed a 2 hour flight, no disconnects. Everything perfect. Don't know what you changed as a work around but it worked. Trev
John Dowson Posted September 13, 2020 Report Posted September 13, 2020 7 hours ago, Cockpitbuilders said: I just wanted to Thank you for the new version today. Just completed a 2 hour flight, no disconnects. Everything perfect. Don't know what you changed as a work around but it worked. This surprises me as it was only a fix to restart the SimConnect connection when the TransmitClientEvent failure is received. Has nothing else changed? Do you still get the TransmitClientEvent failures and it reconnects ok, or have the failures stopped? I am surprised at either! @flash In your case you get the failures and its trying to restart the connection, but is still getting the failures on restart. It then crashes on the 3rd reconnect. As Pete says, please check the Event Viewer to see if there is a crash report for this.
Cockpitbuilders Posted September 13, 2020 Report Posted September 13, 2020 Morning John, The log showed no more TransmitClientEvent failures at all. Was a 2.5 hour Flight and never had a hiccup, unless it was a fluke. I will run it again today and see what happens.
cessna117ab Posted September 13, 2020 Report Posted September 13, 2020 Hey John / Pete, Also having the same crashes that Trev is reporting where FSUIPC completely crashes / closes and requires me to relaunch. It always seems to happen at the same critical phase of flight. My scenario has been a C172 one lap in the pattern and FSUIPC crashes when I am on short final. Tested at multiple airports. I have had other crashes well, but I am able to replicate it on short final. I am going to attach my logs for you guys, as well as test the version you guys have posted here and I will report back if I have any continued issues. User Name="MSFS Tester" User Addr="Time Limited 311020" FSUIPC7 Key is provided WIDEFS7 not user registered, or expired 67547 System time = 13/09/2020 15:06:40 67547 FLT path = "C:\Users\Ryan\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\" [Continuation log requested by user] 82656 SimConnect_Open succeeded 82672 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 82672 MSFS version = 11.0.282174.999 82672 Initialising SimConnect data requests now 87344 Aircraft loaded: running normally now ... 92640 User Aircraft ID not supplied -- trying default 145312 M:\Packages\Official\OneStore\asobo-aircraft-c172sp-classic\SimObjects\Airplanes\Asobo_C172sp_classic\aircraft.CFG 145625 flights\other\MainMenu.FLT 147687 System time = 13/09/2020 15:08:00, Simulator time = 21:06:00 (22:06Z) 147703 Aircraft="Cessna Skyhawk Asobo" 155500 *** EVENT: Cntrl= 65715 (0x000100b3), Param= 28672 (0x00007000) XPNDR_SET 155531 *** EVENT: Cntrl= 65715 (0x000100b3), Param= 28672 (0x00007000) XPNDR_SET 160140 -------------------- Starting everything now ---------------------- 186969 Sim stopped: average frame rate for last 33 secs = 59.2 fps 186969 Max AI traffic was 1 aircraft 186969 ------------------------------------------------------------------- 188719 *** EVENT: Cntrl= 65715 (0x000100b3), Param= 4608 (0x00001200) XPNDR_SET 190594 C:\Users\Ryan\AppData\Local\Packages\Microsoft.FlightSimulator_8wekyb3d8bbwe\LocalState\MISSIONS\Custom\CustomFlight\CustomFlight.FLT 210531 *** EVENT: Cntrl= 65715 (0x000100b3), Param= 4608 (0x00001200) XPNDR_SET 210594 *** EVENT: Cntrl= 65715 (0x000100b3), Param= 4608 (0x00001200) XPNDR_SET 300031 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET 300031 *** AXIS: Cntrl= 65764 (0x000100e4), Param= 0 (0x00000000) AXIS_RUDDER_SET 300031 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET 300109 *** AXIS: Cntrl= 65764 (0x000100e4), Param= 0 (0x00000000) AXIS_RUDDER_SET 300203 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET 300203 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET 300422 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET 300422 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET 300531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET 300531 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET 300578 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET 300578 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET 300656 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET 300656 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET 300703 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET 300703 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 0 (0x00000000) AXIS_AILERONS_SET 300781 *** AXIS: Cntrl= 65762 (0x000100e2), Param= 0 (0x00000000) AXIS_ELEVATOR_SET TRIMMED DUE TO LENGTH 1378281 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 645 (0x00000285) AXIS_AILERONS_SET 1378359 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 768 (0x00000300) AXIS_AILERONS_SET 1378406 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -390 (0xfffffe7a) AXIS_ELEVATOR_SET 1378406 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 970 (0x000003ca) AXIS_AILERONS_SET 1378469 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -780 (0xfffffcf4) AXIS_ELEVATOR_SET 1378484 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1040 (0xfffffbf0) AXIS_ELEVATOR_SET 1378484 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 1024 (0x00000400) AXIS_AILERONS_SET 1378515 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1301 (0xfffffaeb) AXIS_ELEVATOR_SET 1378531 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1561 (0xfffff9e7) AXIS_ELEVATOR_SET 1378531 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 1254 (0x000004e6) AXIS_AILERONS_SET 1378562 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -1821 (0xfffff8e3) AXIS_ELEVATOR_SET 1378609 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -2081 (0xfffff7df) AXIS_ELEVATOR_SET 1378609 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 1280 (0x00000500) AXIS_AILERONS_SET 1378625 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -2341 (0xfffff6db) AXIS_ELEVATOR_SET 1378625 FS Control Sent: Ctrl=65765, Param=-13653 AXIS_THROTTLE_SET 1378656 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -13653 (0xffffcaab) AXIS_THROTTLE_SET 1378672 FS Control Sent: Ctrl=65765, Param=-13913 AXIS_THROTTLE_SET 1378687 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 1134 (0x0000046e) AXIS_AILERONS_SET 1378687 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -2601 (0xfffff5d7) AXIS_ELEVATOR_SET 1378687 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -13913 (0xffffc9a7) AXIS_THROTTLE_SET 1378687 FS Control Sent: Ctrl=65765, Param=-14173 AXIS_THROTTLE_SET 1378703 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -14173 (0xffffc8a3) AXIS_THROTTLE_SET 1378734 FS Control Sent: Ctrl=65765, Param=-14433 AXIS_THROTTLE_SET 1378734 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -2861 (0xfffff4d3) AXIS_ELEVATOR_SET 1378734 *** AXIS: Cntrl= 65763 (0x000100e3), Param= 1024 (0x00000400) AXIS_AILERONS_SET 1378734 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -14433 (0xffffc79f) AXIS_THROTTLE_SET 1378765 FS Control Sent: Ctrl=65765, Param=-14823 AXIS_THROTTLE_SET 1378765 *** AXIS: Cntrl= 65762 (0x000100e2), Param= -3121 (0xfffff3cf) AXIS_ELEVATOR_SET 1378765 *** AXIS: Cntrl= 65765 (0x000100e5), Param= -14823 (0xffffc619) AXIS_THROTTLE_SET 1378812 TransmitClientEvent failed! (Event=65765, Param=-15083, nGroup=0, fSame=0 1378812 FS Control Sent: Ctrl=65765, Param=-15083 AXIS_THROTTLE_SET 1378828 TransmitClientEvent failed! (Event=65762, Param=-3641, nGroup=0, fSame=0 1378859 TransmitClientEvent failed! (Event=65763, Param=512, nGroup=0, fSame=0 1378859 TransmitClientEvent failed! (Event=65765, Param=-15344, nGroup=0, fSame=0 1378859 FS Control Sent: Ctrl=65765, Param=-15344 AXIS_THROTTLE_SET 1378890 TransmitClientEvent failed! (Event=65765, Param=-15864, nGroup=0, fSame=0 1378890 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 1378984 TransmitClientEvent failed! (Event=65762, Param=-3901, nGroup=0, fSame=0 1378984 **** Too many TransmitClientEvent errors received! Re-connecting now ... **** 1379125 FS Control Sent: Ctrl=65765, Param=-15864 AXIS_THROTTLE_SET 1379125 FS Control Sent: Ctrl=65765, Param=-16124 AXIS_THROTTLE_SET 1379125 FS Control Sent: Ctrl=65765, Param=-16384 AXIS_THROTTLE_SET 1379140 SimConnect_Open succeeded 1379140 Running in "KittyHawk", Version: 11.0.282174.999 (SimConnect: 11.0.62651.3) 1379140 MSFS version = 11.0.282174.999 1379140 Initialising SimConnect data requests now 1379140 User Aircraft ID 1 supplied, now being used Windows Event 1 Log Name: Application Source: Application Error Date: 9/13/2020 3:28:32 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: Description: Faulting application name: FSUIPC7.exe, version: 7.0.0.0, time stamp: 0x5f57ac43 Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000 Exception code: 0xc0000005 Fault offset: 0x000000000000000e Faulting process id: 0xcd4 Faulting application start time: 0x01d68a1a001f9264 Faulting application path: C:\Users\Ryan\Desktop\FSUIPC7_B\FSUIPC7\FSUIPC7.exe Faulting module path: unknown Report Id: 9476a5bf-f344-43eb-aa63-db1f6c4befff Faulting package full name: Faulting package-relative application ID: Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Version>0</Version> <Level>2</Level> <Task>100</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2020-09-13T22:28:32.2061010Z" /> <EventRecordID>2110</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>Application</Channel> <Computer>DESKTOP-BLC7PVN</Computer> <Security /> </System> <EventData> <Data>FSUIPC7.exe</Data> <Data>7.0.0.0</Data> <Data>5f57ac43</Data> <Data>unknown</Data> <Data>0.0.0.0</Data> <Data>00000000</Data> <Data>c0000005</Data> <Data>000000000000000e</Data> <Data>cd4</Data> <Data>01d68a1a001f9264</Data> <Data>C:\Users\Ryan\Desktop\FSUIPC7_B\FSUIPC7\FSUIPC7.exe</Data> <Data>unknown</Data> <Data>9476a5bf-f344-43eb-aa63-db1f6c4befff</Data> <Data> </Data> <Data> </Data> </EventData> </Event> Windows Even 2 Log Name: Application Source: Windows Error Reporting Date: 9/13/2020 3:28:32 PM Event ID: 1001 Task Category: None Level: Information Keywords: Classic User: N/A Computer: Description: Fault bucket , type 0 Event Name: BEX64 Response: Not available Cab Id: 0 Problem signature: P1: FSUIPC7.exe P2: 7.0.0.0 P3: 5f57ac43 P4: StackHash_a981 P5: 0.0.0.0 P6: 00000000 P7: PCH_8B_FROM_ntdll+0x000000000009C914 P8: c0000005 P9: 0000000000000008 P10: Attached files: These files may be available here: \\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_FSUIPC7.exe_3fe4612290e0f7bf60ee14d268b67b1e8dae11_3147db8e_301607f6-9153-4172-8068-a36bb433b97e Analysis symbol: Rechecking for solution: 0 Report Id: 9476a5bf-f344-43eb-aa63-db1f6c4befff Report Status: 4 Hashed bucket: Cab Guid: 0 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Error Reporting" /> <EventID Qualifiers="0">1001</EventID> <Version>0</Version> <Level>4</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2020-09-13T22:28:32.4060601Z" /> <EventRecordID>2111</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>Application</Channel> <Computer>DESKTOP-BLC7PVN</Computer> <Security /> </System> <EventData> <Data> </Data> <Data>0</Data> <Data>BEX64</Data> <Data>Not available</Data> <Data>0</Data> <Data>FSUIPC7.exe</Data> <Data>7.0.0.0</Data> <Data>5f57ac43</Data> <Data>StackHash_a981</Data> <Data>0.0.0.0</Data> <Data>00000000</Data> <Data>PCH_8B_FROM_ntdll+0x000000000009C914</Data> <Data>c0000005</Data> <Data>0000000000000008</Data> <Data> </Data> <Data> </Data> <Data>\\?\C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_FSUIPC7.exe_3fe4612290e0f7bf60ee14d268b67b1e8dae11_3147db8e_301607f6-9153-4172-8068-a36bb433b97e</Data> <Data> </Data> <Data>0</Data> <Data>9476a5bf-f344-43eb-aa63-db1f6c4befff</Data> <Data>4</Data> <Data> </Data> <Data>0</Data> </EventData> </Event> Windows Event 3 Log Name: Application Source: Windows Error Reporting Date: 9/13/2020 3:28:32 PM Event ID: 1001 Task Category: None Level: Information Keywords: Classic User: N/A Computer: Description: Fault bucket 1368430993203579066, type 5 Event Name: BEX64 Response: Not available Cab Id: 0 Problem signature: P1: FSUIPC7.exe P2: 7.0.0.0 P3: 5f57ac43 P4: StackHash_a981 P5: 0.0.0.0 P6: 00000000 P7: PCH_8B_FROM_ntdll+0x000000000009C914 P8: c0000005 P9: 0000000000000008 P10: Attached files: \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER36B4.tmp.WERInternalMetadata.xml These files may be available here: \\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_FSUIPC7.exe_3fe4612290e0f7bf60ee14d268b67b1e8dae11_3147db8e_301607f6-9153-4172-8068-a36bb433b97e Analysis symbol: Rechecking for solution: 0 Report Id: 9476a5bf-f344-43eb-aa63-db1f6c4befff Report Status: 268435456 Hashed bucket: 2e7c8994fa7e2980a2fda4bcf188c8ba Cab Guid: 0 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Error Reporting" /> <EventID Qualifiers="0">1001</EventID> <Version>0</Version> <Level>4</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2020-09-13T22:28:32.9506894Z" /> <EventRecordID>2112</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>Application</Channel> <Computer>DESKTOP-BLC7PVN</Computer> <Security /> </System> <EventData> <Data>1368430993203579066</Data> <Data>5</Data> <Data>BEX64</Data> <Data>Not available</Data> <Data>0</Data> <Data>FSUIPC7.exe</Data> <Data>7.0.0.0</Data> <Data>5f57ac43</Data> <Data>StackHash_a981</Data> <Data>0.0.0.0</Data> <Data>00000000</Data> <Data>PCH_8B_FROM_ntdll+0x000000000009C914</Data> <Data>c0000005</Data> <Data>0000000000000008</Data> <Data> </Data> <Data> \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER36B4.tmp.WERInternalMetadata.xml</Data> <Data>\\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_FSUIPC7.exe_3fe4612290e0f7bf60ee14d268b67b1e8dae11_3147db8e_301607f6-9153-4172-8068-a36bb433b97e</Data> <Data> </Data> <Data>0</Data> <Data>9476a5bf-f344-43eb-aa63-db1f6c4befff</Data> <Data>268435456</Data> <Data>2e7c8994fa7e2980a2fda4bcf188c8ba</Data> <Data>0</Data> </EventData> </Event> Hope this help assist diagnosing any issues. Cheers! Ryan
John Dowson Posted September 14, 2020 Report Posted September 14, 2020 @cessna117ab ou are also experiencing the same issue as reported in this thread: It is being investigated. Also, please update and try the latest version. I cannot tell what version you are using as you posted a 'continuation' log. I am closing this thread now as the problems reported here are already in other threads.
Recommended Posts