FeelThere_Vic

Noted, thank you. Thank you for the kind words too! 🙂 Vic

Dear Folks, Please take a little time and read the sticky post. Pretty much everything that was reported here is ignored as we requested a new topic for each issue in order to follow them. If you have something to report, please check if a) was it reported already- if it was don't report it unless we ask b) if it wasn't then open a new topic. I'm kindly asking you to please understand in order to provide you the best possible support we can't read every single post twice a day to find new -non subject - reports. We are doing our best to iron out as much as we can but if you want to be heard, please follow our request. Thank you Vic

Hello, You can follow everything here:

Thank you, are we talking about the RTO?

Noted.

I didn't say we will not look into this. However 16 hours after the initial posting it was bumped again and I wanted to reply. We are scanning this and other forums pretty much 20 hours a day (being international has the advance of someone is always up 🙂 ) but we simply don't have the manpower to acknowledge each and every post by "ok got it" then come back again when it moves on our priority list. To stay transparent we posted a known bug list to keep you updated about our findings, but we also said we wont be able to answer all posts. I hope it makes sense. Thank you Vic

Yes it is as you can see we are trying to resolve issues. Currently supporting a mod is not our top priority. We will come back to you once we sorted out the more important issues. Thanks for your patience

Thank you. We were able to confirm it, it's on the todo list on our sticky "known issues" post. Thanks for your help, it will be fixed in the upcoming SP. Vic

Yes, we jsut posted it, thanks for the suggestion:

Thank you Folks for the report, we don't need anymore. We found the reason and we are already fixed it. It will be part of the upcoming SP. You can follow the SP's status below. If you have anything else to report, please do it in a separate topic, this topic is no longer checked by the team. Thank you for your understanding and your patience. Vic

Can you please tell us which airplane variant(s)? Vic

BMT always replies within 24 hours, don't worry. Thank you Vic

Dear Folks, We would like to share the status of the upcoming SP for the EMB v3. Please note if you report something it will not automatically make this list and for sure it wont get here immediately. We need to verify, reproduce, fix, test then report. There will be issues, reports that will not make the list. We will not comment every single report, but we are actively monitor the forum. There is no timeframe on the SP, we are working as hard as we can to release it as soon as possible. FIXED means we fixed it and will be part of the upcoming SP. As we advance you will see more and more items making that list. If something is NOTED, please don't report it again. You are just taking the support's team time away from working on it. IF YOU REPORT SOMETHING, PLEASE CHECK IF IT'S BEEN REPORTED. TO MAKE THE FORUM CLEAN PLEASE DON'T REPORT IT AGAIN. HOWEVER IF YOU WISH TO ADD SOMETHING NEW DON'T ADD IT INSIDE OF ANOTHER TOPIC WE MIGHT MISS IT. PLEASE OPEN A NEW ONE. SOLUTION ALREADY RELEASED AS HOTFIX -the EMB 175/195 is aliasing the sound to the 190 so if you don't have it, there will be missing sounds. -newer ND database -left/right landing light illuminates the VC -new switch and knob sounds FIXED (will be addressed in the upcoming SP) -the EMB 175/195 is aliasing the sound to the 190 so if you don't have it, there will be missing sounds. -missing customDB folder -The PFD speed scale warning/caution colouring seems to be working off the prediction line as opposed to the current IAS. -beacon light is showing in the VC -the E190's wingview is need to be fixed -E175's front doors open on both sides -VSS camera is too dark at night -E190's gear door -175's winglet -the front galley is dark from the outside view -E195's first officer window can't be closed back -higher res night textures in the VC -mismatched 170/190 flaps -The PFD speed scale warning/caution colouring seems to be working off the prediction line as opposed to the current IAS -When pressing 'b' for the QNH setting. The altitude changes on PFD's and Standby instrument. However, the QNH will only change on the captain PFD. It appears that the standby and FO PFD Baro's are couples. -APPROACHING MINIMUM is announced during takeoff in some cases -updated AI logic -On status page when we open the cargo door aft cargo door (shift+e+3) the page shows 2 cargo doors opened. If you close the fwd cargo door it shows the aft door as close, and the fwd as open.. (EMB 195) -more dumped AT -APU is burning fuel and the right tank gauge represents this, however to total fuel is not changing to represent L+R=T -FD and Flight Path vector logic is updated -Flt control page Rudder graphical error -FPL sequencing on final -rangle LVARS -the first officer's yoke is the same as the captain's -climb speed restrictions are ignored -various FDE reports -brighter taxi lights -max speed placards TESTING -SP1 WORKING ON VERIFIED NOTED -When I first installed the airplane it didn't happen. Second time I loaded the airplane and on - this situation occurs and cannot be changed - Autobrakes, Windshield wipers, same for cockpit door lock switch and rudder trim switch. NOT A BUG: -wipers are not cleaning rain ----this is how's the A2A rain effect works that we use -PDF/MFD's brightness knob you can increase the brightness but you cannot decrease. We did it to save on framerate. ----------PLEASE DO NOT REPLY TO THIS POST, IT'S RESERVED TO THE TEAM. ALL REPLIES WILL BE REMOVED IMMEDIATELY---------- Thank you Vic & Team LAST EDITED: Feb 19

This is for upgrading The E-jets V2 (175/195) INSTALLING THE E-JETS V.3 Upgrade Your purchase doesn’t include a keycode. You need to be the owner of the previous version of the product named ejetsv2-p3dv4-1.exe. Please use the keycode that you received with that purchase to unlock this installer. Vic

Looks like it's airplane specific. Which one did you fly when you experienced it? Can you please try with another too? Thank you Vic

Is it the E190? If so, could you please try that with another type? Thank you

You are keep showing the same wing that we acknowledged in the other topic. We got it 🙂

Can you please send us a saved FLT file when it happens so we can try?

Thank you, moved to our todo list.

Flaps

aft door

Verified by real pilots That's a valid bug, we are aware of that and already sent out some fixes to customers whom verified we solved it. It will be the part of the upcoming SP

Which P3D4 version do you have?

Thank you! The VC fix is testing already so far it's looking to be solved. Vic