Driver170

Throttle1=-16302,-512,512,16383/32 Throttle2=-16384,-512,512,16211/32 SyncSlopeThrottle2=8/8,11/10,17/15,20/18,25/23,29/27,34/31,40/37,44/42,48/45,52/49,56/52,59/56,64/60,67/64,70/67,73/68,78/75,81/78,85/81,95/92,100/99,107/106,110/109,113/113,120/122,124/125,127/128

That entry i sent was infact before i calibrated sorry pete, i forgot to calibrate after i reset it. Its all done now. I'm away out just now and will set sync position tomorrow :)

Figured it out :)

Right so what you are saying is, don't hit OK when using the sync pos button? But i keep getting that message after i set one or two

Tried it with my saitek still over writes them

it keeps over writing the first sync

Throttle1=-16380,-512,512,16380/32 Throttle2=-16380,-512,512,16380/32 SyncSlopeThrottle2=23/22,76/74

I have done the calibration placed the throttles to idle and clicked set and done the same for max

Thats strange why it didn't work? I set quite a few and i did get a message saying would you like to over write? So i clicked yes

[General] AdvDisplayHotKey=88,10 UpdatedByVersion=4938c History=2ETIAEI87QC3ML9SQ4WH5 InitDelayDevicesToo=No NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=Yes ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes OOMcheck=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=No 0=JetMAX 737 Throttle 0.GUID={CB9C6560-90F1-11E4-8001-444553540000} 1=Saitek Pro Flight Rudder Pedals 1.GUID={E068DE30-0837-11E4-8009-444553540000} 2=Saitek Pro Flight Yoke 2.GUID={E068DE30-0837-11E4-800A-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 0=0V,256,D,10,0,0,0 1=0S,256,D,9,0,0,0 [buttons] PollInterval=25 ButtonRepeat=20,10 [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No Port=COM1 Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=Yes [sounds] Path=C:\FSX\Sound\ Device1=Primary Sound Driver Device2=Speakers (Turtle Beach Z300 with Dolby Headphone) Device3=VG248-4 (NVIDIA High Definition Audio) Device4=Realtek Digital Output(Optical) (Realtek High Definition Audio) Device5=Realtek Digital Output (Realtek High Definition Audio) [Profile.737 NGX] 1=Boeing 737-85FC JET2 Winglets 2=Boeing 737-8ASNGX Ryanair Winglets 3=Boeing 737-800 Paint2 [Axes.737 NGX] RangeRepeatRate=10 0=0R,256,D,23,0,0,0 1=0U,256,D,22,0,0,0 2=0V,1,D,10,0,0,0 3=0S,256,D,9,0,0,0 4=1X,256,D,7,0,0,0 5=1Y,256,D,8,0,0,0 6=1R,256,D,3,40,0,0 7=2X,256,D,45,0,0,0 8=2Y,256,D,46,0,0,0 9=2V,256 10=2V,B,-16384,-5331,66080,1,66079,0 [JoystickCalibration.737 NGX] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Spoilers=-16076,16077 Flaps=-16164,16383 LeftBrake=-16383,16384/16 RightBrake=-16383,16384/16 Rudder=-16380,-512,512,16380 Aileron=-16380,-512,512,16380 SlopeRudder=-3 Elevator=-16380,-512,512,16380 SlewSide=-16380,-512,512,16380 SlewAhead=-16380,-512,512,16380 SlopeAileron=-3 SlopeElevator=-3 Throttle1=-16057,-512,512,16380/32 Throttle2=-16384,-512,512,16380/32 SyncSlopeThrottle2=53/50 [buttons.737 NGX] 0=P0,0,C65752,0 1=U0,0,C65752,0 2=P0,8,C70320,0 3=U0,8,C70320,1 4=P0,7,C70321,0 5=U0,7,C70321,1 6=P0,1,C65604,0 7=P0,4,C65604,0 8=P0,2,C65860,0 9=P0,6,C65861,0 10=R0,3,C65602,0 11=P2,0,C65580,0 12=P2,1,C65860,0 13=R2,3,C65615,0 14=R2,2,C65607,0 15=P2,7,C65910,0 16=P2,6,C66297,0 17=P2,17,C66317,0 18=P2,15,C66695,0 19=P2,14,K90,8 20=P2,16,K88,10 21=P2,18,K75,11 [Keys.737 NGX] 1=78,8,66733,0 [Auto] 1=Lua frictions [LuaFiles] 1=Frictions [Window.Radar Contact] Docked=129, 13802, 3522, 1857 [Monitor] Display=4 Monitor0=0,024C,5,0

I was choosing alot and it still didn't work! I was actually trying to find a real 737NG during taxi and see if there where any discrepancies between th N1 on youtube etc. Its only about .2 or .3 at the most difference

Hi pete i tried it with the default 737 and its still not perfectly synced.

That sync pos isn't working ?

Hi all through FSUIPC! I recalibrated my TQ its alot better almost in sync but not quite its a tiny bit out?

I got the jetmax throttle last month and always set the throttles to set in FSUIPC so they all move at once. But today i wanted to set each throttle lever to each throttle IE Throttle lever 1 in FSUIPC set to throttle 1 Throttle lever 2 in FSUIPC set to throttle 2 But when i set this up and move the levers the NGX levers are not in sync its like they both move but not at the same time? Any help appreciated cheers.

Sorted it pete, thanks alot

Ahh right, so you basically set the keystroke ie ctr + x to the button command in fsuipc?

No problem but before i try it later on, what am i looking for? Will it say radar contact window toggle in fsuipc list?

Yeh i knew that but wasn't sure about GSX keystrokes, RC etc?

It all seems working fine just worried it could conflict. I'm using jetmax throttle its just the buttons i'm using to toggle GSX, Radar contact window etc and other assignments. The reason i'm using saitek software is so it saves me using the keyboard for radar contact toggle window and GSX, instead i just use the buttons on the saitek throttle. I don't use the saitek throttle just the buttons. Cheers

I have all controls set through FSUIPC and not FSX. my question is i just downloaded the saitek profile editor software to assign keys from my keyboard to buttons on the saitek throttle. will this now conflict with my saitek yoke. because in that software its picking up the movement on my yoke.

Sorry pete i was just making sure! You had to move it from that zip folder.

take*

Do i need to the file out of the FSUIPC DOCUMENTS folder and place it in the modules folder to have a affect

whats the difference between the dynamicfriction file and the frictions.lua pete?