Donovan

The Parking Brake control is a "Toggle" control. 19=PD,6,C65752,0 -{PARKING_BRAKES}- 20=UD,6,C65752,0 -{PARKING_BRAKES}- You are essentially toggling the parking brake ON then immediately OFF as you release the key. Remove the line 20=UD,6,C65752,0 and it will work as desired.

I use FltplanGo, the GPSOUT facility of FSUICP, over a bluetooth connection successfully and reliably using an Android tablet on P3Dv5.1, as well as FSX and FSX-SE, both on Windows 10 and Windows 7. I don't have any apple devices, but the basic outline is in the thread "Sending GPS data to Android Apps (Bluetooth)" in the user contributions section. If this is the type of set-up you are trying to employ then I'd be happy to outline my setup. Works wonderfully. I would assume it will work with WingX (although I have never used that software), but it works flawlessly with FltplanGo.

Sorry to make a late addendum to the thread, the limit to the max number of lua files has come up before, but in a different context, but I suspect you were already aware of it. You've probably already worked out a solution, but you might want to also look over the thread: It might be useful for you... Or not...

In the same vein, with slightly different syntax is a similar workable method. (Flag set using LuaSet, param) --lights.lua function LightsControl(flag) if ipc.testflag(1) then --TaxiLights ipc.clearflag(1) Taxi=ipc.readLvar("L:AB_TAXI_LT") if Taxi==nil or Taxi==0 then ipc.writeLvar("L:AB_TAXI_LT", 1) elseif Taxi==1 then ipc.writeLvar("L:AB_TAXI_LT", 2) else ipc.writeLvar("L:AB_TAXI_LT", 0) end elseif ipc.testflag(2) then --Landing Lights ipc.clearflag(2) -- [Insert Desired Code] elseif ipc.testflag(3) then --Stobe Lights ipc.clearflag(3) -- [Insert Desired Code] elseif ipc.testflag(4) then --Beacon Lights ipc.clearflag(4) -- [Insert Desired Code] else end end event.flag("LightsControl") Best, Don

Re-downloaded, and installed 4.973 without a problem this evening. No idea what the original error was -- had to have been the loose nut behind the yoke (me... ) Thanks for the speedy reply and all you do! Best, Don

In keeping my FSUIPC current, it appears that the latest update to 4.973 contains 4.972a of FSUIPC.dll. Am I mistaken? The install log appears fine without errors, but the version displayed in FSUIPC.log, and the heading data in the processed FSUIPC.ini still shows 4.972a. Just checking in case I need to do some debugging on my side. Best, Don

Hi Roger, I don't use any Saitek drivers, but solely use FSUIPC4. The Yoke MODE switch, in the following example is B22 (left position="Mode 1"), B23 (center position="Mode 2"), and B24 (right position="Mode 3"). Using The conditional button checking features, I have three modes enabled. This is just a snippet example from the .ini file. You have to manually edit the .ini file to set up the conditional programming. See FSUIPC4 for Advanced Users section "Compound Button Conditions," page 24 and Appendix 1 - "Doing more with your joystick," starting page 50 for the documentation. 14=CP(+B,22)B,6,K73,9 ;GNS 530W ZOOMOUT, MODE1 -{Key press: shft+I}- 15=CP(+B,22)B,7,K68,9 ;GNS 530W ZOOMIN, MODE1 -{Key press: shft+D}- 16=CR(+B,23)B,6,C66276,0 ;LEFT_ALIERON_TRIM, MODE2 -{AILERON_TRIM_LEFT}- 17=CR(+B,23)B,7,C66277,0 ;RIGHT_ALIERON_TRIM, MODE2 -{AILERON_TRIM_RIGHT}- 18=CR(+B,24)B,6,C66278,0 ;LEFT_RUDDER_TRIM, MODE3 -{RUDDER_TRIM_LEFT}- 19=CR(+B,24)B,7,C66279,0 ;RIGHT_RUDDER_TRIM, MODE3 -{RUDDER_TRIM_RIGHT}- As I don't use any of the Saitek Drivers, I cannot comment on whether or not that affects FSUIPC "seeing" the button position. Best, Don

Ahhh yes! Good point! Don

Hi Pete, Prior to starting FSX, I setup my flight plan in Opus FSI, then select Export PLN Flight Plan to C:\Users\DBT\Documents\Flight Simulator X Files. I start FSX, which automatically loads the FLT file located as C:\Users\DBT\Documents\Flight Simulator X Files\FSX Startup for Complex Aircraft.FLT . From the Free Flight screen I'll select the aircraft, modify the fuel load, select the departure location, manually load the flight plan into FSX, set the time, and then Fly Now. Once the flight is started at the gate/ramp, I manually start TrackIR, and lastly manually start Opus FSI. I've attached the FSX Startup for Complex Aircraft.FLT (which is supplied by Flight1 as a default flight to clear any previous flight data that may be residual) Were it not for the notice generated, I would not know anything was unusual, as everything appears to operate just fine. Like I said, this really is not a big deal to me, I just wanted to let you know just in case it was indicative of something else that could crop up down the line. Thanks! Don FSX Startup for Complex Aircraft.FLT

Hi Pete, This is a "small-potatoes" report, and doesn't appear to actually affect any functionality at all, but just in case there is more going on behind the scenes I thought I should let you know. After updating FSUIPC4 to ver 4.971b, the following notation began appearing in the FSUIPC4.LOG: (In RED) ********* FSUIPC4, Version 4.971b (15th October 2017) by Pete Dowson ********* Windows 7 Professional 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) fsx.exe version = 10.0.61637.0 Reading options from "F:\FSX\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=663D0000 User Name="xxxxx" User Addr="xxxxx" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 0 System time = 03/11/2017 08:23:10 0 FLT path = "C:\Users\DBT\Documents\Flight Simulator X Files\" 0 ------ Module Version Check ------ 0 acontain.dll: 10.0.61637.0 0 api.dll: 10.0.61637.0 0 controls.dll: 10.0.61637.0 0 fs-traffic.dll: 10.0.61637.0 0 G3D.dll: 10.0.61637.0 0 language.dll: 10.0.61637.0 0 sim1.dll: 10.0.61637.0 0 visualfx.dll: 10.0.61637.0 0 weather.dll: 10.0.61637.0 0 window.dll: 10.0.61637.0 0 ---------------------------------- 31 Trying to connect to SimConnect Acc/SP2 Oct07 ... 31 FS path = "F:\FSX\" 140 Finished: 0 Profile files created 140 ---------------------- Joystick Device Scan ----------------------- 140 Product= <not readable at this time: maybe device disconnected?> 140 Vendor=046D, Product=C2AB (Version 0.1) 140 GUIDs returned for product: VID_046D&PID_C2AB: 140 GUID= {8B2B3250-791B-11E5-8004-444553540000} 140 Details: Btns=1, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X255,Y255,Z0 140 Product= CH THROTTLE QUADRANT 140 Manufacturer= CH PRODUCTS 140 Vendor=068E, Product=00FA (Version 0.0) 140 GUIDs returned for product: VID_068E&PID_00FA: 140 GUID= {D082FFB0-0ED0-11E4-8009-444553540000} 140 Details: Btns=12, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U255,V255,X255,Y255,Z255 140 Product= Saitek Pro Flight Combat Rudder Pedals 156 Manufacturer= Saitek 156 Vendor=06A3, Product=0764 (Version 2.1) 156 GUIDs returned for product: VID_06A3&PID_0764: 156 GUID= {11FC9C90-100B-11E4-8001-444553540000} 156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R1023,U0,V0,X127,Y127,Z0 156 Product= Pro Flight Cessna Yoke 156 Manufacturer= Saitek 156 Serial Number= RD005891 156 Vendor=06A3, Product=0BD3 (Version 1.22) 156 GUIDs returned for product: VID_06A3&PID_0BD3: 156 GUID= {D082FFB0-0ED0-11E4-800A-444553540000} 156 Details: Btns=25, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U255,V255,X1023,Y1023,Z255 156 Product= DTA Rotary Encoder 156 Manufacturer= Desktop Aviator 156 Serial Number= B45815 156 Vendor=16C0, Product=27CB (Version 1.33) 156 GUIDs returned for product: VID_16C0&PID_27CB: 156 GUID= {D082FFB0-0ED0-11E4-800C-444553540000} 156 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 156 GUID= {A9F78DC0-F7D7-11E4-8002-444553540000} 156 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 156 Product= DTA Rotary Encoder 156 Manufacturer= Desktop Aviator 156 Serial Number= B32619 156 Vendor=16C0, Product=27CB (Version 1.33) 156 Product= Model 2235 156 Manufacturer= Desktop Aviator 156 Serial Number= DTA04103 156 Vendor=16D0, Product=0488 (Version 0.1) 156 GUIDs returned for product: VID_16D0&PID_0488: 156 GUID= {A9F78DC0-F7D7-11E4-8003-444553540000} 156 Details: Btns=31, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 156 Product= Trim Wheel 156 Manufacturer= Desktop Aviator 171 Serial Number= DTA01262 171 Vendor=6017, Product=3529 (Version 0.1) 171 GUIDs returned for product: VID_6017&PID_3529: 171 GUID= {D082FFB0-0ED0-11E4-800D-444553540000} 171 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z4095 171 ------------------------------------------------------------------- 171 Device acquired for use: 171 Joystick ID = 7 (Registry okay) 171 7=Logitech G13 Joystick 171 7.GUID={8B2B3250-791B-11E5-8004-444553540000} 171 Device acquired for use: 171 Joystick ID = 6 (Registry okay) 171 6=CH THROTTLE QUADRANT 171 6.GUID={D082FFB0-0ED0-11E4-8009-444553540000} 171 Device acquired for use: 171 Joystick ID = 4 (Registry okay) 171 4=Saitek Pro Flight Combat Rudder Pedals 171 4.GUID={11FC9C90-100B-11E4-8001-444553540000} 171 Device acquired for use: 171 Joystick ID = 1 (Registry okay) 171 1=Pro Flight Cessna Yoke 171 1.GUID={D082FFB0-0ED0-11E4-800A-444553540000} 171 Device acquired for use: 171 Joystick ID = 0 (Registry okay) 171 0=DTA Rotary Encoder 171 0.GUID={D082FFB0-0ED0-11E4-800C-444553540000} 171 Device acquired for use: 171 Joystick ID = 2 (Registry okay) 171 2=DTA Rotary Encoder 171 2.GUID={A9F78DC0-F7D7-11E4-8002-444553540000} 171 Device acquired for use: 171 Joystick ID = 5 (Registry okay) 171 5=Model 2235 171 5.GUID={A9F78DC0-F7D7-11E4-8003-444553540000} 171 Device acquired for use: 171 Joystick ID = 3 (Registry okay) 171 3=Trim Wheel 171 3.GUID={D082FFB0-0ED0-11E4-800D-444553540000} 171 ------------------------------------------------------------------- 593 LogOptions=00000000 00000001 593 ------------------------------------------------------------------- 593 ------ Setting the hooks and direct calls into the simulator ------ 593 --- CONTROLS timer memory location obtained ok 593 --- SIM1 Frictions access gained 593 --- FS Controls Table located ok 593 --- Installed Mouse Macro hooks ok. 593 --- Wind smoothing fix is fully installed 593 --- G3D.DLL fix attempt installed ok 593 --- SimConnect intercept for texts and menus option is off 593 --- All links checked okay 593 ------------------------------------------------------------------- 593 SimConnect_Open succeeded: waiting to check version okay 593 Trying to use SimConnect Acc/SP2 Oct07 593 Opened separate AI Traffic client okay 1232 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 1232 Initialising SimConnect data requests now 1232 FSUIPC Menu entry added 1248 C:\Users\DBT\Documents\Flight Simulator X Files\FSX Startup for Complex Aircraft.FLT 1248 F:\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 18314 F:\FSX\SimObjects\Airplanes\Eaglesoft Citation X 2.0\CitationX.AIR 44585 *** NOTE! Flight plan string needed proper '.PLN' adding! 44585 C:\Users\DBT\Documents\Flight Simulator X Files\KMSO_KSUN.PLN.PLN 51511 User Aircraft ID 1 supplied, now being used 51511 Aircraft loaded: running normally now ... 51605 System time = 03/11/2017 08:24:01, Simulator time = 08:23:11 (15:23Z) 52042 Aircraft="Eaglesoft Citation X 2.0 N646DT" 84116 Starting everything now ... 87641 Advanced Weather Interface Enabled 177903 Sim stopped: average frame rate for last 97 secs = 29.5 fps 177903 Max AI traffic was 0 aircraft 177903 === Closing session: waiting for DLLStop to be called ... 180805 === DLLStop called ... 180805 === Closing external processes we started ... 181803 === About to kill any Lua plug-ins still running ... 181944 Lua threads being terminated: 181944 0 = "F:\FSX\Modules\SlewMode.lua" 182100 LUA: "F:\FSX\Modules\SlewMode.lua": killed 182100 1 = "F:\FSX\Modules\CitX_YokeButton.lua" 182256 LUA: "F:\FSX\Modules\CitX_YokeButton.lua": killed 182256 2 = "F:\FSX\Modules\CitX_Console.lua" 182412 LUA: "F:\FSX\Modules\CitX_Console.lua": killed 182412 3 = "F:\FSX\Modules\mousemove.lua" 182552 LUA: "F:\FSX\Modules\mousemove.lua": killed 182552 === Closing global Lua thread 183551 === About to kill my timers ... 183753 === Restoring window procs ... 183753 === Unloading libraries ... 183753 === stopping other threads ... 183753 === ... GPSout ... 183800 === ... Button scanning ... 183894 === ... Axis scanning ... 184003 === Releasing joystick devices ... 184003 === Freeing macro memory 184003 === Removing any offset overrides 184003 === Clearing any displays left 184003 === NOTE: not calling SimConnect_Close ... 184003 === AI slots deleted! 184003 === Freeing button memory ... 184003 === Closing my Windows ... 184003 === Freeing FS libraries ... 185001 === Closing devices ... 185001 === Closing the Log ... Bye Bye! ... 185001 System time = 03/11/2017 08:26:15, Simulator time = 08:24:47 (15:24Z) 185001 *** FSUIPC log file being closed Minimum frame rate was 27.5 fps, Maximum was 29.9 fps Minimum available memory recorded was 32768Mb Average frame rate for running time of 97 secs = 29.3 fps G3D fix: Passes 14515, Null pointers 0, Bad pointers 0, Separate instances 0 Maximum AI traffic for session was 0 aircraft Memory managed: 85 Allocs, 85 Freed ********* FSUIPC Log file closed *********** The kicker is, per monitoring the file names in C:\Users\DBT\Documents\Flight Simulator X Files, the *.PLN file actually is *not* renamed to *.PLN.PLN, and this notice did not affect the loading of the *.PLN in the sim or FMS, so it appears to be just a type of aberrant notice, without any adverse effects in functionality. The PLN file is created by Opus FSI, which I've used for a couple years (beginning with Opus FSX) to generate the FSX flight plans. Just to check myself, I replace the FSUIPC4.dll with ver 4.971 and ran the same startup with the same flight plan, and you can see the notice is not present: ********* FSUIPC4, Version 4.971 (16th August 2017) by Pete Dowson ********* Windows 7 Professional 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) fsx.exe version = 10.0.61637.0 Reading options from "F:\FSX\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=66440000 User Name="xxxxx" User Addr="xxxxx" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 15 System time = 03/11/2017 08:15:52 15 FLT path = "C:\Users\DBT\Documents\Flight Simulator X Files\" 15 ------ Module Version Check ------ 15 acontain.dll: 10.0.61637.0 15 api.dll: 10.0.61637.0 15 controls.dll: 10.0.61637.0 15 fs-traffic.dll: 10.0.61637.0 15 G3D.dll: 10.0.61637.0 15 language.dll: 10.0.61637.0 15 sim1.dll: 10.0.61637.0 15 visualfx.dll: 10.0.61637.0 15 weather.dll: 10.0.61637.0 15 window.dll: 10.0.61637.0 15 ---------------------------------- 31 Trying to connect to SimConnect Acc/SP2 Oct07 ... 47 FS path = "F:\FSX\" 140 Finished: 0 Profile files created 156 ---------------------- Joystick Device Scan ----------------------- 156 Product= <not readable at this time: maybe device disconnected?> 156 Vendor=046D, Product=C2AB (Version 0.1) 156 GUIDs returned for product: VID_046D&PID_C2AB: 156 GUID= {8B2B3250-791B-11E5-8004-444553540000} 156 Details: Btns=1, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X255,Y255,Z0 156 Product= CH THROTTLE QUADRANT 156 Manufacturer= CH PRODUCTS 156 Vendor=068E, Product=00FA (Version 0.0) 156 GUIDs returned for product: VID_068E&PID_00FA: 156 GUID= {D082FFB0-0ED0-11E4-8009-444553540000} 156 Details: Btns=12, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R255,U255,V255,X255,Y255,Z255 156 Product= Saitek Pro Flight Combat Rudder Pedals 156 Manufacturer= Saitek 156 Vendor=06A3, Product=0764 (Version 2.1) 156 GUIDs returned for product: VID_06A3&PID_0764: 156 GUID= {11FC9C90-100B-11E4-8001-444553540000} 156 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R1023,U0,V0,X127,Y127,Z0 156 Product= Pro Flight Cessna Yoke 156 Manufacturer= Saitek 156 Serial Number= RD005891 156 Vendor=06A3, Product=0BD3 (Version 1.22) 156 GUIDs returned for product: VID_06A3&PID_0BD3: 156 GUID= {D082FFB0-0ED0-11E4-800A-444553540000} 156 Details: Btns=25, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U255,V255,X1023,Y1023,Z255 156 Product= DTA Rotary Encoder 156 Manufacturer= Desktop Aviator 171 Serial Number= B45815 171 Vendor=16C0, Product=27CB (Version 1.33) 171 GUIDs returned for product: VID_16C0&PID_27CB: 171 GUID= {D082FFB0-0ED0-11E4-800C-444553540000} 171 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 171 GUID= {A9F78DC0-F7D7-11E4-8002-444553540000} 171 Details: Btns=32, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 171 Product= DTA Rotary Encoder 171 Manufacturer= Desktop Aviator 171 Serial Number= B32619 171 Vendor=16C0, Product=27CB (Version 1.33) 171 Product= Model 2235 171 Manufacturer= Desktop Aviator 171 Serial Number= DTA04103 171 Vendor=16D0, Product=0488 (Version 0.1) 171 GUIDs returned for product: VID_16D0&PID_0488: 171 GUID= {A9F78DC0-F7D7-11E4-8003-444553540000} 171 Details: Btns=31, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z0 171 Product= Trim Wheel 171 Manufacturer= Desktop Aviator 171 Serial Number= DTA01262 171 Vendor=6017, Product=3529 (Version 0.1) 171 GUIDs returned for product: VID_6017&PID_3529: 171 GUID= {D082FFB0-0ED0-11E4-800D-444553540000} 171 Details: Btns=0, POVs=(0, 0, 0, 0), Cal=x00000000, Max=R0,U0,V0,X0,Y0,Z4095 171 ------------------------------------------------------------------- 187 Device acquired for use: 187 Joystick ID = 7 (Registry okay) 187 7=Logitech G13 Joystick 187 7.GUID={8B2B3250-791B-11E5-8004-444553540000} 187 Device acquired for use: 187 Joystick ID = 6 (Registry okay) 187 6=CH THROTTLE QUADRANT 187 6.GUID={D082FFB0-0ED0-11E4-8009-444553540000} 187 Device acquired for use: 187 Joystick ID = 4 (Registry okay) 187 4=Saitek Pro Flight Combat Rudder Pedals 187 4.GUID={11FC9C90-100B-11E4-8001-444553540000} 187 Device acquired for use: 187 Joystick ID = 1 (Registry okay) 187 1=Pro Flight Cessna Yoke 187 1.GUID={D082FFB0-0ED0-11E4-800A-444553540000} 187 Device acquired for use: 187 Joystick ID = 0 (Registry okay) 187 0=DTA Rotary Encoder 187 0.GUID={D082FFB0-0ED0-11E4-800C-444553540000} 187 Device acquired for use: 187 Joystick ID = 2 (Registry okay) 187 2=DTA Rotary Encoder 187 2.GUID={A9F78DC0-F7D7-11E4-8002-444553540000} 187 Device acquired for use: 187 Joystick ID = 5 (Registry okay) 187 5=Model 2235 187 5.GUID={A9F78DC0-F7D7-11E4-8003-444553540000} 187 Device acquired for use: 187 Joystick ID = 3 (Registry okay) 187 3=Trim Wheel 187 3.GUID={D082FFB0-0ED0-11E4-800D-444553540000} 187 ------------------------------------------------------------------- 593 LogOptions=00000000 00000001 593 ------------------------------------------------------------------- 593 ------ Setting the hooks and direct calls into the simulator ------ 593 --- CONTROLS timer memory location obtained ok 593 --- SIM1 Frictions access gained 593 --- FS Controls Table located ok 593 --- Installed Mouse Macro hooks ok. 593 --- Wind smoothing fix is fully installed 593 --- G3D.DLL fix attempt installed ok 593 --- SimConnect intercept for texts and menus option is off 593 --- All links checked okay 593 ------------------------------------------------------------------- 593 SimConnect_Open succeeded: waiting to check version okay 593 Trying to use SimConnect Acc/SP2 Oct07 593 Opened separate AI Traffic client okay 1232 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 1232 Initialising SimConnect data requests now 1232 FSUIPC Menu entry added 1248 C:\Users\DBT\Documents\Flight Simulator X Files\FSX Startup for Complex Aircraft.FLT 1248 F:\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 15756 F:\FSX\SimObjects\Airplanes\Eaglesoft Citation X 2.0\CitationX.AIR 38438 Planned flight from KMSO to KSUN 38438 C:\Users\DBT\Documents\Flight Simulator X Files\KMSO_KSUN.PLN 45755 User Aircraft ID 1 supplied, now being used 45755 Aircraft loaded: running normally now ... 45895 System time = 03/11/2017 08:16:38, Simulator time = 08:15:54 (15:15Z) 46301 Aircraft="Eaglesoft Citation X 2.0 N646DT" 77080 Starting everything now ... 80621 Advanced Weather Interface Enabled 180025 Sim stopped: average frame rate for last 105 secs = 29.5 fps 180025 Max AI traffic was 0 aircraft 180025 === Closing session: waiting for DLLStop to be called ... 182895 === DLLStop called ... 182895 === Closing external processes we started ... 183894 === About to kill any Lua plug-ins still running ... 184050 Lua threads being terminated: 184050 0 = "F:\FSX\Modules\SlewMode.lua" 184190 LUA: "F:\FSX\Modules\SlewMode.lua": killed 184190 1 = "F:\FSX\Modules\CitX_YokeButton.lua" 184346 LUA: "F:\FSX\Modules\CitX_YokeButton.lua": killed 184346 2 = "F:\FSX\Modules\CitX_Console.lua" 184502 LUA: "F:\FSX\Modules\CitX_Console.lua": killed 184502 3 = "F:\FSX\Modules\mousemove.lua" 184658 LUA: "F:\FSX\Modules\mousemove.lua": killed 184658 === Closing global Lua thread 185657 === About to kill my timers ... 185844 === Restoring window procs ... 185844 === Unloading libraries ... 185844 === stopping other threads ... 185844 === ... GPSout ... 185875 === ... Button scanning ... 185969 === ... Axis scanning ... 186078 === Releasing joystick devices ... 186078 === Freeing macro memory 186078 === Removing any offset overrides 186078 === Clearing any displays left 186078 === NOTE: not calling SimConnect_Close ... 186078 === AI slots deleted! 186078 === Freeing button memory ... 186078 === Closing my Windows ... 186078 === Freeing FS libraries ... 187076 === Closing devices ... 187076 === Closing the Log ... Bye Bye! ... 187076 System time = 03/11/2017 08:19:00, Simulator time = 08:17:38 (15:17Z) 187076 *** FSUIPC log file being closed Minimum frame rate was 27.0 fps, Maximum was 30.0 fps Minimum available memory recorded was 32768Mb Average frame rate for running time of 105 secs = 29.5 fps G3D fix: Passes 14326, Null pointers 0, Bad pointers 0, Separate instances 0 Maximum AI traffic for session was 0 aircraft Memory managed: 87 Allocs, 87 Freed ********* FSUIPC Log file closed *********** This is just feedback, it doesn't appear to have any functional impact at all at this time. Thanks for all your hard work, you're amazing! Don

If you actually want a button sequence, rather than the more standard button combination (shift+key, ctrl+key or shift+ctrl+key) your best bet is a lua script, but I believe it could also be done with a MCRO.

Ahhh, understood ! If the required logic exceeds what is easily accomplished with the button flags, you can always write some short macros triggered by the button presses. We all started with no experience! But, it sure is satisfying in the end when you work it out! The APPENDIX 1: “Do more with your joystick” from the Advanced User Guide is a fantastic reference for button programming. Best in your endeavors! Don

Admittedly I don't have my wits completely wrapped around the entirety of your button programming. I am puzzled about your flag setting and clearing and whether you are actually accomplishing what you intend. FSUIPC will automatically toggle the button flags with sequential presses from (-) to (+) to (-), so I'm a bit unclear of your use of the flag sets and clearing with your assigned buttons, but if you've double checked your logic on this then ok. Re: the F1 Mustang's input.ini file -- I and others have found that it works only via assigned keys as the intermediary, then you can assign those keys to FSUIPC functions. That is why I use very few of those (about 5 or 6 max), and did as much as possible via FSUIPC and compound button assignments. Best, Don

It appears from your illustrations that you're using a single dual rotary for tuning all 4 frequencies (ie COM1 radio, COM2 Radio, NAV1 radio, and NAV2 Radio) If you're using the Input.ini (..\gauges\flight1_garminG1000_Aux\ folder) then you could simply chose to assign your keys & buttons there, making sure no conflicts with native FSX/P3D or FSUIPC assignments, (use the entries PFD_Com_Cursor= , PFD_Com_Swap= , PFD_Nav_Cursor= ,PFD_Nav_Swap= , and the PFD Com & PFD Nav assignments.) If you're like me, and using FSUIPC and "standard" FSX controls, then use Com_Radio_Whole Inc/Dec and Com_Radio_Fract Inc/Dec for COM1, and ComSTBY_Radio_Whole_Inc/Dec and ComSTBY_Radio_Fract_Inc/Dec for the COM2 radio. (NOTE: there's a difference between stby RADIO, vs stby FREQUENCY). I use the standard "Com1/2 Tx Switch" to toggle which is the active radio with ATC (online PilotEdge). The NAV Radios are more straightforward -- NAV1 Radio Whole Inc/Dec, & Fract Inc/Decr, NAV2 Radio Whole Inc/Dec, and NAV2 Radio Fract Inc/Decr. Use the CDI mode to select which is active simply by assigning the standard "G1000 PFD Softkey 6" from the dropdowns, to toggle the CDI from GPS to NAV1 or NAV2. By default behavior, the Frequency entries are always applied to the standby frequency box. I use compound/conditional edits in the FSUIPC.ini file to select which COM or NAV frequency is being entered by the dual rotary. (great explanation, which I'm sure you've found in the FSUIPC4 for Advanced Users, section Compound Button Conditions on pg 24) So you can do it either via the Input.ini for the Flight 1 Mustang, or FSUIPC and edits to the FSUIPC.ini file, depending on your approach. You could also mix and match as needed between the two. There isn't only one way to get things functional for you. Best, Don

Luck had little to do with it, I'm sure! All devices present & accounted for, and functioning as intended! Thank you again for all your efforts! Best, Don FSUIPC4(test_C).ini FSUIPC4(test_C).log

Here's the tests from 4964b. Still difficulties with the second rotary panel recognition. Don FSUIPC4(test_b1).log FSUIPC4(test_b1).ini

Pete, This is the selection you requested -- Let me know if there is anything else I can be assistance with. Don ------ Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\0] "GUID"=hex:b0,ff,82,d0,d0,0e,e4,11,80,0c,44,45,53,54,00,00 "Joystick Id"=hex:02,00,00,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\0\Type] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\1] "GUID"=hex:c0,8d,f7,a9,d7,f7,e4,11,80,02,44,45,53,54,00,00 "Joystick Id"=hex:05,00,00,00 [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\1\Type] [HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\DeviceInstances] "8&170F4E3B&0&0000"=hex:02 "7&9E5138C&0&0000"=hex:02 ------

Pete, Sure will do! I am at work for the next several but will do so this evening when I'm back at the sim. Don

Pete, On the test version have a reproducible problem with the second of two rotary "identical" panels by same manufacturer. Both recognized and functional on 4964, but second rotary panel (device F or 5) not functional on 4964a_test. Thank you for all your hard work and continued improvements! Don --- FSUPIC4(test2).ini --- [Auto] !1=Lua SlewMode [General] UpdatedByVersion=4964a History=SUBDCGVT238DD7J733WH6 InitDelayDevicesToo=No NewInterceptTextMenu=No UseSystemTime=Yes UseMidMouseBtn=No MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=No BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No AutoScanDevices=Yes NoWeatherAtAll=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=3 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=Yes ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=Yes ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Files EnableMouseLook=No DelayedMouseLookZoom=No AxesWrongRange=No TCASid=Tail TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=Yes SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes OOMcheck=No AutoGlobalWeather=No WeatherReadFactor=2 WeatherRewriteSeconds=1 UseASEweather=No CustomWeatherModify=No SimConnectStallTime=20 LuaRerunDelay=66 Console=No OOMcheckInterval=10 AssignJoystickIDs=Yes ConsoleWindow=1945,390,2777,1106 NewDeleteVehiclesForAES=No Annotate=Yes LogOptionProtect=Yes TimeForLuaClosing=1 WideLuaGlobals=Yes ThreadAffinityMask=x0 LuaAffinityMask=x0 LogExtras=x200000 Debug=Please FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=Yes 0=Model 2235 0.GUID={A9F78DC0-F7D7-11E4-8003-444553540000} G=Model 2235 G.GUID={A9F78DC0-F7D7-11E4-8003-444553540000} 1=Pro Flight Cessna Yoke 1.GUID={D082FFB0-0ED0-11E4-800A-444553540000} B=Pro Flight Cessna Yoke B.GUID={D082FFB0-0ED0-11E4-800A-444553540000} 2=DTA Rotary Encoder 2.GUID={D082FFB0-0ED0-11E4-800C-444553540000} C=DTA Rotary Encoder C.GUID={D082FFB0-0ED0-11E4-800C-444553540000} 3=Trim Wheel 3.GUID={D082FFB0-0ED0-11E4-800D-444553540000} D=Trim Wheel D.GUID={D082FFB0-0ED0-11E4-800D-444553540000} 4=Saitek Pro Flight Combat Rudder Pedals 4.GUID={11FC9C90-100B-11E4-8001-444553540000} E=Saitek Pro Flight Combat Rudder Pedals E.GUID={11FC9C90-100B-11E4-8001-444553540000} F=DTA Rotary Encoder F.GUID={A9F78DC0-F7D7-11E4-8002-444553540000} 6=CH THROTTLE QUADRANT 6.GUID={D082FFB0-0ED0-11E4-8009-444553540000} A=CH THROTTLE QUADRANT A.GUID={D082FFB0-0ED0-11E4-8009-444553540000} 7=Logitech G13 Joystick 7.GUID={8B2B3250-791B-11E5-8004-444553540000} H=Logitech G13 Joystick H.GUID={8B2B3250-791B-11E5-8004-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 0=BX,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=BY,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=DZ,256,D,21,0,0,0 -{ DIRECT: ElevatorTrim }- 3=EX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 4=EY,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 5=ER,256,D,3,0,0,0 -{ DIRECT: Rudder }- 6=AX,256,F,66420,0,0,0 -{ TO SIM: AXIS_THROTTLE1_SET }- 7=AY,256,F,66423,0,0,0 -{ TO SIM: AXIS_THROTTLE2_SET }- 8=AZ,256,D,17,0,0,0 -{ DIRECT: PropPitch1 }- 9=AR,256,D,14,0,0,0 -{ DIRECT: Mixture2 }- 10=AU,256,D,18,0,0,0 -{ DIRECT: PropPitch2 }- 11=AV,256,D,13,0,0,0 -{ DIRECT: Mixture1 }- [JoystickCalibration] ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No MaxThrottleForReverser=0 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 PropPitch1=-16253,0,512,13952 PropPitch2=-16384,0,512,14592 SyncSlopePropPitch2=65/65,79/78,93/93,114/114,127/128 Mixture1=-16384,8192,8192,14080 Mixture2=-16384,8192,8192,14080 SyncSlopeMixture2=0/0,5/12,14/13,24/26,30/30,37/38,43/42,52/52,59/61,70/78,96/104,127/127 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 ElevatorTrim=-16303,368,624,16224 [Buttons] PollInterval=25 ButtonRepeat=20,10 EliminateTransients=Yes KeyboardFocus=Yes 1=PA,10,C65759,0 -{FLAPS_DECR}- 2=PA,11,C65758,0 -{FLAPS_INCR}- 3=PA,8,C66079,0 -{GEAR_UP}- 4=PA,9,C66080,0 -{GEAR_DOWN}- 5=PA,6,C66244,0 -{DEC_COWL_FLAPS}- 6=PA,7,C66243,0 -{INC_COWL_FLAPS}- 7=PA,5,C65752,0 -{PARKING_BRAKES}- 8=PA,0,C66224,0 -{ENGINE_AUTO_START}- 9=PG,14,C65560,0 -{STROBES_TOGGLE}- 10=PG,12,C66239,0 -{TOGGLE_BEACON_LIGHTS}- 11=PG,10,C66379,0 -{TOGGLE_NAV_LIGHTS}- 12=PG,28,C65750,0 -{PANEL_LIGHTS_TOGGLE}- 13=PG,7,C66240,0 -{TOGGLE_TAXI_LIGHTS}- 14=PG,6,C65751,0 -{LANDING_LIGHTS_TOGGLE}- 16=PG,4,C66293,0 -{TOGGLE_AVIONICS_MASTER}- 17=PG,27,C66287,0 -{TOGGLE_PROPELLER_SYNC}- 18=PG,21,C65858,0 -{PITOT_HEAT_TOGGLE}- 19=PG,17,C66363,0 -{TOGGLE_ALTERNATOR1}- 20=PG,18,C66364,0 -{TOGGLE_ALTERNATOR2}- 21=PG,13,C1061,0 -{engine 1 autostart}- 22=PF,18,C65636,0 -{COM_RADIO_WHOLE_DEC}- 23=PF,19,C65637,0 -{COM_RADIO_WHOLE_INC}- 24=PF,24,C65638,0 -{COM_RADIO_FRACT_DEC}- 25=PF,25,C65639,0 -{COM_RADIO_FRACT_INC}- 26=PF,31,C66372,0 -{COM_STBY_RADIO_SWAP}- 28=PF,0,C65640,0 -{NAV1_RADIO_WHOLE_DEC}- 29=PF,1,C65641,0 -{NAV1_RADIO_WHOLE_INC}- 30=PF,6,C65642,0 -{NAV1_RADIO_FRACT_DEC}- 31=PF,7,C65643,0 -{NAV1_RADIO_FRACT_INC}- 32=PF,30,C66448,0 -{NAV1_RADIO_SWAP}- 33=PF,15,C66444,0 -{COM2_RADIO_SWAP}- 34=PF,8,C66436,0 -{COM2_RADIO_WHOLE_DEC}- 35=PF,9,C66437,0 -{COM2_RADIO_WHOLE_INC}- 36=PF,2,C66438,0 -{COM2_RADIO_FRACT_DEC}- 37=PF,3,C66440,0 -{COM2_RADIO_FRACT_INC}- 38=PF,26,C65644,0 -{NAV2_RADIO_WHOLE_DEC}- 39=PF,27,C65645,0 -{NAV2_RADIO_WHOLE_INC}- 40=PF,20,C65646,0 -{NAV2_RADIO_FRACT_DEC}- 41=PF,21,C65647,0 -{NAV2_RADIO_FRACT_INC}- 42=PF,14,C66452,0 -{NAV2_RADIO_SWAP}- 43=PC,31,C66372,0 -{COM_STBY_RADIO_SWAP}- 44=PC,18,C65636,0 -{COM_RADIO_WHOLE_DEC}- 45=PC,19,C65637,0 -{COM_RADIO_WHOLE_INC}- 46=PC,24,C65638,0 -{COM_RADIO_FRACT_DEC}- 47=PC,25,C65639,0 -{COM_RADIO_FRACT_INC}- 48=PC,30,C66448,0 -{NAV1_RADIO_SWAP}- 50=PC,15,C66444,0 -{COM2_RADIO_SWAP}- 51=PC,14,C66452,0 -{NAV2_RADIO_SWAP}- 52=PC,26,C65644,0 -{NAV2_RADIO_WHOLE_DEC}- 53=PC,27,C65645,0 -{NAV2_RADIO_WHOLE_INC}- 54=PC,20,C65646,0 -{NAV2_RADIO_FRACT_DEC}- 55=PC,21,C65647,0 -{NAV2_RADIO_FRACT_INC}- 56=CP(F-C,8)C,0,C65880,0 -{HEADING_BUG_DEC}- 57=CP(F-C,8)C,1,C65879,0 -{HEADING_BUG_INC}- 58=CP(F+C,8)C,0,C1024,0 -{heading bug dec fast}- 59=CP(F+C,8)C,1,C1025,0 -{heading bug inc fast}- 60=PC,7,K85,10 -{Key press: ctl+U}- 61=PC,6,K76,10 -{Key press: ctl+L}- 62=CP(F-C,9)C,2,C65662,0 -{VOR1_OBI_DEC}- 63=CP(F+C,9)C,2,C1026,0 -{vor1 obi dec fast}- 64=CP(F-C,9)C,3,C65663,0 -{VOR1_OBI_INC}- 65=CP(F+C,9)C,3,C1027,0 -{vor1 obi inc fast}- 68=PC,10,C1005,0 -{BUTTON FLAG Toggle: Joy 0 Button 0}- 69=PB,0,C1001,0 -{PTT Transmit On (SB3,RW,AVC)}- 70=UB,0,C1002,0 -{PTT Transmit Off (SB3,RW,AVC)}- 71=RB,5,C65607,0 -{ELEV_TRIM_DN}- 72=RB,4,C65615,0 -{ELEV_TRIM_UP}- 73=PB,7,K68,9 -{Key press: shft+D}- 74=PB,12,K87,8 -{Key press: W}- 75=PB,11,K87,8 -{Key press: W}- 76=PB,2,K122,8 -{Key press: F11}- 77=PB,3,C65749,0 -{VIEW_MODE_REV}- 78=PB,6,K73,9 -{Key press: shft+I}- 79=PG,24,C66293,0 -{TOGGLE_AVIONICS_MASTER}- 80=PG,25,C1062,0 -{engine 2 autostart}- 82=UG,24,CL46:R,0 -{Lua sw_sound}- 83=PG,3,C66340,0 -{TOGGLE_ELECT_FUEL_PUMP1}- 84=PG,2,C66341,0 -{TOGGLE_ELECT_FUEL_PUMP2}- 85=UG,14,CL46:R,0 -{Lua sw_sound}- 86=UG,12,CL46:R,0 -{Lua sw_sound}- 87=UG,10,CL46:R,0 -{Lua sw_sound}- 88=UG,7,CL46:R,0 -{Lua sw_sound}- 89=UG,6,CL46:R,0 -{Lua sw_sound}- 90=UG,27,CL46:R,0 -{Lua sw_sound}- 92=UG,17,CL46:R,0 -{Lua sw_sound}- 93=UG,18,CL46:R,0 -{Lua sw_sound}- 94=UG,13,CL46:R,0 -{Lua sw_sound}- 95=UG,25,CL46:R,0 -{Lua sw_sound}- 96=UG,3,CL46:R,0 -{Lua sw_sound}- 97=UG,2,CL46:R,0 -{Lua sw_sound}- 98=UG,28,CL46:R,0 -{Lua sw_sound}- 99=UG,21,CL46:R,0 -{Lua sw_sound}- 100=PG,22,C66241,0 -{TOGGLE_MASTER_BATTERY}- 101=UG,22,CL46:R,0 -{Lua sw_sound}- [Keys] 65=87,11,65749,0 -{ctl+shft+W: Press=VIEW_MODE_REV }- 66=49,11,65734,0 -{ctl+shft+1: Press=PAN_UP }- 69=71,8,L7:R,0 -{G: Press=Lua log lvars }- 71=71,9,L7:K,0 -{shft+G: Press=LuaKill log lvars (Flag 0) }- 76=113,9,L13:S,2 -{shft+F2: Press=LuaSet SlewMode (Flag 2) }- 78=114,9,L13:S,3 -{shft+F3: Press=LuaSet SlewMode (Flag 3) }- 80=115,9,L13:S,4 -{shft+F4: Press=LuaSet SlewMode (Flag 4) }- 82=116,9,L13:S,5 -{shft+F5: Press=LuaSet SlewMode (Flag 5) }- 84=117,9,L13:S,6 -{shft+F6: Press=LuaSet SlewMode (Flag 6) }- 86=118,9,L13:S,7 -{shft+F7: Press=LuaSet SlewMode (Flag 7) }- 88=120,9,L13:S,8 -{shft+F9: Press=LuaSet SlewMode (Flag 8) }- 91=119,9,L13:S,9 -{shft+F8: Press=LuaSet SlewMode (Flag 9) }- 93=122,9,L13:S,10 -{shft+F11: Press=LuaSet SlewMode (Flag 10) }- 95=123,9,L13:S,11 -{shft+F12: Press=LuaSet SlewMode (Flag 11) }- 97=118,8,L13:S,12 -{F7: Press=LuaSet SlewMode (Flag 12) }- 99=119,8,L13:S,13 -{F8: Press=LuaSet SlewMode (Flag 13) }- 103=89,9,L13:S,1 -{shft+Y: Press=LuaSet SlewMode (Flag 1) }- [MacroFiles] 1=HSI_Hdg_Sync 2=HSICrsPush 3=OpusAPKeys 5=CitX 6=HWell_AP 7=Opus 8=CitXSoftKeys 9=Pilot_DC 10=CitXDeIce 4=G1000_TOGA [LuaFiles] 1=ToggleModeC 2=B200_logolight 3=G1000AutoPilot 4=G1000_MapToggle 5=BE58_COM_TOG 6=B200_WarnOff 7=log lvars 8=C_BE58 9=B200_lyoke_hide 10=GNS530Voice 11=F1_YokeButton 12=B58YokeButton 13=SlewMode 14=LVARS_2_TXT 15=LVAR_SPECIFIC 16=Mustang_Console 17=B200_RuddrBoost 18=Mustang_YokeP 19=G1000_TWarn 20=CitX_YokeButton 21=Cit_Revrse 22=Cit_Off_Rev 24=mousemove 25=CitX_Console 35=GTX327Xpndr 36=ipcDebug 38=ModeCharlieOn 39=ModeCharlieOff 42=G1000_OBSDEC 43=G1000_OBSINC 46=sw_sound 47=voiceChecklists 49=B200_Console [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=Yes Port=COM3 Speed=19200 Interval=500 PosTo6Decimal=No SimModeIndicator=No Sentences=RMC,GGA,GSA,GSV [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=500 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=No [Sounds] Path=F:\FSX\Sound\ Device1=Primary Sound Driver Device2=Speakers (ASUS Xonar DGX Audio Device) Device3=Speakers (2- Realtek High Definition Audio) [Traffic Limiter] TrafficLimit=0 AirportPreference=50 GroundPreference=50 NearerPreference=50 TargetFrameRate=0 PlannedAirportsPreference=50 [Window.LUA display] Docked=7350, 2772, 3560, 3580 Undocked=0, 0, 8, 8 [Monitor] [Profile.Carenado BARON] 1=Carenado BARON [Profile.F1_Kingair_B200] 1=F1_Kingair_B200-2 2=F1_Kingair_B200-1 3=F1_Kingair_B200-4 [Profile.F1_Cessna_Mustang] 1=F1_Cessna_Mustang1 2=F1_Cessna_Mustang2 3=F1_Cessna_Mustang_N166DT [Profile.Eaglesoft Citation X] 1=Eaglesoft Citation X 2.0 N800ES WS 2=Eaglesoft Citation X 2.0 N646DT --- FSUIPC4(test2).log --- ********* FSUIPC4, Version 4.964a (7th March 2017) by Pete Dowson ********* Windows 7 Professional 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) fsx.exe version = 10.0.61637.0 Reading options from "F:\FSX\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=5E850000 User Name="omitted" User Addr="omitted" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 0 System time = 07/03/2017 11:14:24 0 FLT path = "C:\Users\DBT\Documents\Flight Simulator X Files\" 0 ------ Module Version Check ------ 0 acontain.dll: 10.0.61637.0 0 api.dll: 10.0.61637.0 0 controls.dll: 10.0.61637.0 0 fs-traffic.dll: 10.0.61637.0 0 G3D.dll: 10.0.61637.0 0 language.dll: 10.0.61637.0 0 sim1.dll: 10.0.61637.0 0 visualfx.dll: 10.0.61637.0 0 weather.dll: 10.0.61637.0 0 window.dll: 10.0.61637.0 0 ---------------------------------- 31 Trying to connect to SimConnect Acc/SP2 Oct07 ... 31 FS path = "F:\FSX\" 140 Finished: 0 Profile files created 140 #### Initialising Dlrectinput Axis Scanning ... 140 EnumDevices: 0.GUID={A9F78DC0-F7D7-11E4-8003-444553540000} 140 EnumDevices: 1.GUID={D082FFB0-0ED0-11E4-800A-444553540000} 140 EnumDevices: 2.GUID={D082FFB0-0ED0-11E4-800C-444553540000} 140 EnumDevices: 3.GUID={D082FFB0-0ED0-11E4-800D-444553540000} 140 EnumDevices: 4.GUID={11FC9C90-100B-11E4-8001-444553540000} 140 EnumDevices: 5.GUID={A9F78DC0-F7D7-11E4-8002-444553540000} 140 EnumDevices: 6.GUID={D082FFB0-0ED0-11E4-8009-444553540000} 140 EnumDevices: 7.GUID={8B2B3250-791B-11E5-8004-444553540000} 140 ---------------------- Joystick Device Scan ----------------------- 140 Checking: \\?\hid#vid_046d&pid_c21c#7&37b66dfb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Checking: \\?\hid#vid_046d&pid_c231#2&a02f33&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Checking: \\?\hid#vid_046d&pid_c232#2&15f744c8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Checking: \\?\hid#vid_046d&pid_c2ab#2&23498da8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Error 1784 [000006F8] returned on HidD_GetProductString: (\\?\hid#vid_046d&pid_c2ab#2&23498da8&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}) 140 Product= <not readable at this time: device disconnected?> 140 Vendor=046D, Product=C2AB (Version 0.1) 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_046D&PID_C2AB\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_046D&PID_C2AB\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_046D&PID_C2AB\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_046D&PID_C2AB\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_046D&PID_C2AB\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_046D&PID_C2AB\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_046D&PID_C2AB\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_046D&PID_C2AB\Calibration\0" 140 ... and a "GUID" value 140 Assigned joystick id 7 (Registry okay) 140 ... okay, Acquired device as #7 140 GUID= {8B2B3250-791B-11E5-8004-444553540000} 140 Checking: \\?\hid#vid_047d&pid_1020#6&2e946d92&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Error 6 [00000006] returned on HidD_GetPreparsedData: () 140 Checking: \\?\hid#vid_047d&pid_2043&mi_00#8&c7849a2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Checking: \\?\hid#vid_047d&pid_2043&mi_01&col01#8&243bd5e7&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Checking: \\?\hid#vid_047d&pid_2043&mi_01&col02#8&243bd5e7&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Checking: \\?\hid#vid_04d9&pid_1505&col01#7&1f2c07b2&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Checking: \\?\hid#vid_04d9&pid_1505&col02#7&1f2c07b2&0&0001#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Checking: \\?\hid#vid_068e&pid_00fa#7&276006bb&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 140 Product= CH THROTTLE QUADRANT 140 Manufacturer= CH PRODUCTS 140 Vendor=068E, Product=00FA (Version 0.0) 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_068E&PID_00FA\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_068E&PID_00FA\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_068E&PID_00FA\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_068E&PID_00FA\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_068E&PID_00FA\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_068E&PID_00FA\Calibration\0" 140 ... and a "GUID" value 140 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_068E&PID_00FA\Calibration\0" 140 ... and a "GUID" value 140 Assigned joystick id 6 (Registry okay) 156 ... okay, Acquired device as #6 156 GUID= {D082FFB0-0ED0-11E4-8009-444553540000} 156 Checking: \\?\hid#vid_06a3&pid_0764#7&2683d90c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 156 Product= Saitek Pro Flight Combat Rudder Pedals 156 Manufacturer= Saitek 156 Vendor=06A3, Product=0764 (Version 2.1) 156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0764\Calibration\0" 156 ... and a "GUID" value 156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0764\Calibration\0" 156 ... and a "GUID" value 156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0764\Calibration\0" 156 ... and a "GUID" value 156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0764\Calibration\0" 156 ... and a "GUID" value 156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0764\Calibration\0" 156 ... and a "GUID" value 156 Assigned joystick id 4 (Registry okay) 156 ... okay, Acquired device as #4 156 GUID= {11FC9C90-100B-11E4-8001-444553540000} 156 Checking: \\?\hid#vid_06a3&pid_0bd3#9&b795d76&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 156 Product= Pro Flight Cessna Yoke 156 Manufacturer= Saitek 156 Serial Number= RD005891 156 Vendor=06A3, Product=0BD3 (Version 1.22) 156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0BD3\Calibration\0" 156 ... and a "GUID" value 156 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_06A3&PID_0BD3\Calibration\0" 156 ... and a "GUID" value 156 Assigned joystick id 1 (Registry okay) 156 ... okay, Acquired device as #1 156 GUID= {D082FFB0-0ED0-11E4-800A-444553540000} 156 Checking: \\?\hid#vid_16c0&pid_27cb#7&9e5138c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 156 Product= DTA Rotary Encoder 156 Manufacturer= Desktop Aviator 172 Serial Number= B45815 172 Vendor=16C0, Product=27CB (Version 1.33) 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\0" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\1" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\0" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\1" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\0" 172 ... and a "GUID" value 172 Assigned joystick id 2 (Registry okay) 172 ... okay, Acquired device as #2 172 GUID= {D082FFB0-0ED0-11E4-800C-444553540000} 172 Checking: \\?\hid#vid_16c0&pid_27cb#8&170f4e3b&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 172 Product= DTA Rotary Encoder 172 Manufacturer= Desktop Aviator 172 Serial Number= B32619 172 Vendor=16C0, Product=27CB (Version 1.33) 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\0" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\1" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\0" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\1" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16C0&PID_27CB\Calibration\0" 172 ... and a "GUID" value 172 Assigned joystick id 2 (Registry okay) 172 ... okay, Acquired device as #2 172 GUID= {D082FFB0-0ED0-11E4-800C-444553540000} 172 Checking: \\?\hid#vid_16d0&pid_0488#7&157a84d6&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 172 Product= Model 2235 172 Manufacturer= Desktop Aviator 172 Serial Number= DTA04103 172 Vendor=16D0, Product=0488 (Version 0.1) 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_16D0&PID_0488\Calibration\0" 172 ... and a "GUID" value 172 Assigned joystick id 0 (Registry okay) 172 ... okay, Acquired device as #0 172 GUID= {A9F78DC0-F7D7-11E4-8003-444553540000} 172 Checking: \\?\hid#vid_6017&pid_3529#8&234e1637&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} 172 Product= Trim Wheel 172 Manufacturer= Desktop Aviator 172 Serial Number= DTA01262 172 Vendor=6017, Product=3529 (Version 0.1) 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_6017&PID_3529\Calibration\0" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_6017&PID_3529\Calibration\0" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_6017&PID_3529\Calibration\0" 172 ... and a "GUID" value 172 Trying: "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\DirectInput\VID_6017&PID_3529\Calibration\0" 172 ... and a "GUID" value 172 Assigned joystick id 3 (Registry okay) 187 ... okay, Acquired device as #3 187 GUID= {D082FFB0-0ED0-11E4-800D-444553540000} 187 ------------------------------------------------------------------- 187 #### Completed Dlrectinput Axis Scanning 187 ---------- Making INI JoyNames Section ---------- 187 Joy#0: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_16D0&PID_0488\" 187 Joy#0: OEMName = "Model 2235" 187 Joy#0: GUID = {A9F78DC0-F7D7-11E4-8003-444553540000} 187 Joy#1: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0BD3\" 187 Joy#1: OEMName = "Pro Flight Cessna Yoke" 187 Joy#1: GUID = {D082FFB0-0ED0-11E4-800A-444553540000} 187 Joy#2: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_16C0&PID_27CB\" 187 Joy#2: OEMName = "DTA Rotary Encoder" 187 Joy#2: GUID = {D082FFB0-0ED0-11E4-800C-444553540000} 187 Joy#3: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_6017&PID_3529\" 187 Joy#3: OEMName = "Trim Wheel" 187 Joy#3: GUID = {D082FFB0-0ED0-11E4-800D-444553540000} 187 Joy#4: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0764\" 187 Joy#4: OEMName = "Saitek Pro Flight Combat Rudder Pedals" 187 Joy#4: GUID = {11FC9C90-100B-11E4-8001-444553540000} 187 Joy#6: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_068E&PID_00FA\" 187 Joy#6: OEMName = "CH THROTTLE QUADRANT" 187 Joy#6: GUID = {D082FFB0-0ED0-11E4-8009-444553540000} 187 Joy#7: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_046D&PID_C2AB\" 187 Joy#7: OEMName = "Logitech G13 Joystick" 187 Joy#7: GUID = {8B2B3250-791B-11E5-8004-444553540000} 187 ------------------------------------------------- 546 LogOptions=00000000 02000011 546 ------------------------------------------------------------------- 546 ------ Setting the hooks and direct calls into the simulator ------ 546 --- CONTROLS timer memory location obtained ok 546 --- SIM1 Frictions access gained 546 --- FS Controls Table located ok 546 --- Installed Mouse Macro hooks ok. 546 --- Wind smoothing fix is fully installed 546 --- G3D.DLL fix attempt installed ok 546 --- SimConnect intercept for texts and menus option is off 546 --- All links checked okay 546 ------------------------------------------------------------------- 546 SimConnect_Open succeeded: waiting to check version okay 546 Trying to use SimConnect Acc/SP2 Oct07 546 Opened separate AI Traffic client okay 1217 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 1217 Initialising SimConnect data requests now 1217 FSUIPC Menu entry added 1232 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 1232 C:\Users\DBT\Documents\Flight Simulator X Files\FSX Startup for Complex Aircraft.FLT 1232 F:\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 38735 F:\FSX\SimObjects\Airplanes\Eaglesoft Citation X 2.0\CitationX.AIR 71979 Planned flight from KPSP to KSMX 71979 C:\Users\DBT\Documents\Flight Simulator X Files\KPSP_KSMX.PLN 80762 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 80793 Aircraft loaded: running normally now ... 80793 User Aircraft ID 1 supplied, now being used 80871 System time = 07/03/2017 11:15:45, Simulator time = 11:15:42 (19:15Z) 81245 Aircraft="Eaglesoft Citation X 2.0 N646DT" 81323 Ready Flags: Ready-To-Fly=N, In Menu=Y, In Dlg=Y 94552 Ready Flags: Ready-To-Fly=N, In Menu=N, In Dlg=N 102664 Starting everything now ... 102664 Note: "F:\FSX\Modules\PFCFSX.DLL", Error 126 (The specified module could not be found. ) 102664 Note: "F:\FSX\Modules\EPICINFO5.DLL", Error 126 (The specified module could not be found. ) 102664 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 106159 Advanced Weather Interface Enabled 191788 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 191788 Sim stopped: average frame rate for last 97 secs = 28.6 fps 191788 Max AI traffic was 0 aircraft 204018 ---------- Making INI JoyNames Section ---------- 204018 Joy#0: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_16D0&PID_0488\" 204018 Joy#0: OEMName = "Model 2235" 204018 Joy#0: GUID = {A9F78DC0-F7D7-11E4-8003-444553540000} 204018 Joy#1: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0BD3\" 204018 Joy#1: OEMName = "Pro Flight Cessna Yoke" 204018 Joy#1: GUID = {D082FFB0-0ED0-11E4-800A-444553540000} 204018 Joy#2: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_16C0&PID_27CB\" 204018 Joy#2: OEMName = "DTA Rotary Encoder" 204018 Joy#2: GUID = {D082FFB0-0ED0-11E4-800C-444553540000} 204018 Joy#3: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_6017&PID_3529\" 204018 Joy#3: OEMName = "Trim Wheel" 204018 Joy#3: GUID = {D082FFB0-0ED0-11E4-800D-444553540000} 204018 Joy#4: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_06A3&PID_0764\" 204018 Joy#4: OEMName = "Saitek Pro Flight Combat Rudder Pedals" 204018 Joy#4: GUID = {11FC9C90-100B-11E4-8001-444553540000} 204018 Joy#6: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_068E&PID_00FA\" 204018 Joy#6: OEMName = "CH THROTTLE QUADRANT" 204018 Joy#6: GUID = {D082FFB0-0ED0-11E4-8009-444553540000} 204018 Joy#7: Finding name in "HKCU\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_046D&PID_C2AB\" 204018 Joy#7: OEMName = "Logitech G13 Joystick" 204018 Joy#7: GUID = {8B2B3250-791B-11E5-8004-444553540000} 204018 ------------------------------------------------- 204205 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 230663 Ready Flags: Ready-To-Fly=Y, In Menu=Y, In Dlg=Y 230663 Sim stopped: average frame rate for last 26 secs = 29.8 fps 230663 Max AI traffic was 0 aircraft 233565 Deactivated for PID=2444, "Flight Data Recorder.exe" 233565 Lost focus to PID=2444, "Flight Data Recorder.exe" 233565 === DLLStop called ... 233565 === Closing external processes we started ... 234563 === About to kill any Lua plug-ins still running ... 234719 Lua threads being terminated: 234719 0 = "F:\FSX\Modules\CitX_YokeButton.lua" 234875 LUA: "F:\FSX\Modules\CitX_YokeButton.lua": killed 234875 1 = "F:\FSX\Modules\CitX_Console.lua" 235016 LUA: "F:\FSX\Modules\CitX_Console.lua": killed 235016 2 = "F:\FSX\Modules\mousemove.lua" 235172 LUA: "F:\FSX\Modules\mousemove.lua": killed 235172 === Closing global Lua thread 236170 === About to kill my timers ... 236373 === Restoring window procs ... 236373 === Unloading libraries ... 236373 === stopping other threads ... 236373 === ... GPSout ... 236435 === ... Button scanning ... 236529 === ... Axis scanning ... 236638 === Releasing joystick devices ... 236638 === Freeing macro memory 236638 === Removing any offset overrides 236638 === Clearing any displays left 236638 === NOTE: not calling SimConnect_Close ... 236638 === AI slots deleted! 236638 === Freeing button memory ... 236638 === Closing my Windows ... 236638 === Freeing FS libraries ... 237636 === Closing devices ... 237636 === Closing the Log ... Bye Bye! ... 237636 System time = 07/03/2017 11:18:22, Simulator time = 11:17:44 (19:17Z) 237636 *** FSUIPC log file being closed Minimum frame rate was 24.5 fps, Maximum was 29.9 fps Minimum available memory recorded was 32768Mb Average frame rate for running time of 124 secs = 28.7 fps G3D fix: Passes 9690, Null pointers 0, Bad pointers 0, Separate instances 0 Maximum AI traffic for session was 0 aircraft Memory managed: 88 Allocs, 88 Freed ********* FSUIPC Log file closed *********** Working Fine v. 4964: --- FSUIPC4.ini --- [Auto] !1=Lua SlewMode [General] UpdatedByVersion=4964 History=5O6V6APOKXGG60C0WWPAF InitDelayDevicesToo=No NewInterceptTextMenu=No UseSystemTime=Yes UseMidMouseBtn=No MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=No BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No AutoScanDevices=Yes NoWeatherAtAll=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=3 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=Yes ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=Yes ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Files EnableMouseLook=No DelayedMouseLookZoom=No AxesWrongRange=No TCASid=Tail TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=Yes SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No InitDelay=0 GetNearestAirports=Yes OOMcheck=No AutoGlobalWeather=No WeatherReadFactor=2 WeatherRewriteSeconds=1 UseASEweather=No CustomWeatherModify=No SimConnectStallTime=20 LuaRerunDelay=66 Console=No OOMcheckInterval=10 AssignJoystickIDs=Yes ConsoleWindow=1945,390,2777,1106 NewDeleteVehiclesForAES=No Annotate=Yes LogOptionProtect=Yes TimeForLuaClosing=1 WideLuaGlobals=Yes ThreadAffinityMask=x0 LuaAffinityMask=x0 FSVersionUsed="Microsoft Flight Simulator X",10.0.61637.0 SimConnectUsed=10.0.61259.0 [JoyNames] AutoAssignLetters=Yes 0=Model 2235 0.GUID={A9F78DC0-F7D7-11E4-8003-444553540000} G=Model 2235 G.GUID={A9F78DC0-F7D7-11E4-8003-444553540000} 1=Pro Flight Cessna Yoke 1.GUID={D082FFB0-0ED0-11E4-800A-444553540000} B=Pro Flight Cessna Yoke B.GUID={D082FFB0-0ED0-11E4-800A-444553540000} 2=DTA Rotary Encoder 2.GUID={D082FFB0-0ED0-11E4-800C-444553540000} C=DTA Rotary Encoder C.GUID={D082FFB0-0ED0-11E4-800C-444553540000} 3=Trim Wheel 3.GUID={D082FFB0-0ED0-11E4-800D-444553540000} D=Trim Wheel D.GUID={D082FFB0-0ED0-11E4-800D-444553540000} 4=Saitek Pro Flight Combat Rudder Pedals 4.GUID={11FC9C90-100B-11E4-8001-444553540000} E=Saitek Pro Flight Combat Rudder Pedals E.GUID={11FC9C90-100B-11E4-8001-444553540000} 5=DTA Rotary Encoder 5.GUID={A9F78DC0-F7D7-11E4-8002-444553540000} F=DTA Rotary Encoder F.GUID={A9F78DC0-F7D7-11E4-8002-444553540000} 6=CH THROTTLE QUADRANT 6.GUID={D082FFB0-0ED0-11E4-8009-444553540000} A=CH THROTTLE QUADRANT A.GUID={D082FFB0-0ED0-11E4-8009-444553540000} 7=Logitech G13 Joystick 7.GUID={8B2B3250-791B-11E5-8004-444553540000} H=Logitech G13 Joystick H.GUID={8B2B3250-791B-11E5-8004-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 0=BX,256,D,1,0,0,0 -{ DIRECT: Aileron }- 1=BY,256,D,2,0,0,0 -{ DIRECT: Elevator }- 2=DZ,256,D,21,0,0,0 -{ DIRECT: ElevatorTrim }- 3=EX,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 4=EY,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 5=ER,256,D,3,0,0,0 -{ DIRECT: Rudder }- 6=AX,256,F,66420,0,0,0 -{ TO SIM: AXIS_THROTTLE1_SET }- 7=AY,256,F,66423,0,0,0 -{ TO SIM: AXIS_THROTTLE2_SET }- 8=AZ,256,D,17,0,0,0 -{ DIRECT: PropPitch1 }- 9=AR,256,D,14,0,0,0 -{ DIRECT: Mixture2 }- 10=AU,256,D,18,0,0,0 -{ DIRECT: PropPitch2 }- 11=AV,256,D,13,0,0,0 -{ DIRECT: Mixture1 }- [JoystickCalibration] ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=No MaxThrottleForReverser=0 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 PropPitch1=-16253,0,512,13952 PropPitch2=-16384,0,512,14592 SyncSlopePropPitch2=65/65,79/78,93/93,114/114,127/128 Mixture1=-16384,8192,8192,14080 Mixture2=-16384,8192,8192,14080 SyncSlopeMixture2=0/0,5/12,14/13,24/26,30/30,37/38,43/42,52/52,59/61,70/78,96/104,127/127 LeftBrake=-16380,16380/16 RightBrake=-16380,16380/16 ElevatorTrim=-16303,368,624,16224 [Buttons] PollInterval=25 ButtonRepeat=20,10 EliminateTransients=Yes KeyboardFocus=Yes 1=PA,10,C65759,0 -{FLAPS_DECR}- 2=PA,11,C65758,0 -{FLAPS_INCR}- 3=PA,8,C66079,0 -{GEAR_UP}- 4=PA,9,C66080,0 -{GEAR_DOWN}- 5=PA,6,C66244,0 -{DEC_COWL_FLAPS}- 6=PA,7,C66243,0 -{INC_COWL_FLAPS}- 7=PA,5,C65752,0 -{PARKING_BRAKES}- 8=PA,0,C66224,0 -{ENGINE_AUTO_START}- 9=PG,14,C65560,0 -{STROBES_TOGGLE}- 10=PG,12,C66239,0 -{TOGGLE_BEACON_LIGHTS}- 11=PG,10,C66379,0 -{TOGGLE_NAV_LIGHTS}- 12=PG,28,C65750,0 -{PANEL_LIGHTS_TOGGLE}- 13=PG,7,C66240,0 -{TOGGLE_TAXI_LIGHTS}- 14=PG,6,C65751,0 -{LANDING_LIGHTS_TOGGLE}- 16=PG,4,C66293,0 -{TOGGLE_AVIONICS_MASTER}- 17=PG,27,C66287,0 -{TOGGLE_PROPELLER_SYNC}- 18=PG,21,C65858,0 -{PITOT_HEAT_TOGGLE}- 19=PG,17,C66363,0 -{TOGGLE_ALTERNATOR1}- 20=PG,18,C66364,0 -{TOGGLE_ALTERNATOR2}- 21=PG,13,C1061,0 -{engine 1 autostart}- 22=PF,18,C65636,0 -{COM_RADIO_WHOLE_DEC}- 23=PF,19,C65637,0 -{COM_RADIO_WHOLE_INC}- 24=PF,24,C65638,0 -{COM_RADIO_FRACT_DEC}- 25=PF,25,C65639,0 -{COM_RADIO_FRACT_INC}- 26=PF,31,C66372,0 -{COM_STBY_RADIO_SWAP}- 28=PF,0,C65640,0 -{NAV1_RADIO_WHOLE_DEC}- 29=PF,1,C65641,0 -{NAV1_RADIO_WHOLE_INC}- 30=PF,6,C65642,0 -{NAV1_RADIO_FRACT_DEC}- 31=PF,7,C65643,0 -{NAV1_RADIO_FRACT_INC}- 32=PF,30,C66448,0 -{NAV1_RADIO_SWAP}- 33=PF,15,C66444,0 -{COM2_RADIO_SWAP}- 34=PF,8,C66436,0 -{COM2_RADIO_WHOLE_DEC}- 35=PF,9,C66437,0 -{COM2_RADIO_WHOLE_INC}- 36=PF,2,C66438,0 -{COM2_RADIO_FRACT_DEC}- 37=PF,3,C66440,0 -{COM2_RADIO_FRACT_INC}- 38=PF,26,C65644,0 -{NAV2_RADIO_WHOLE_DEC}- 39=PF,27,C65645,0 -{NAV2_RADIO_WHOLE_INC}- 40=PF,20,C65646,0 -{NAV2_RADIO_FRACT_DEC}- 41=PF,21,C65647,0 -{NAV2_RADIO_FRACT_INC}- 42=PF,14,C66452,0 -{NAV2_RADIO_SWAP}- 43=PC,31,C66372,0 -{COM_STBY_RADIO_SWAP}- 44=PC,18,C65636,0 -{COM_RADIO_WHOLE_DEC}- 45=PC,19,C65637,0 -{COM_RADIO_WHOLE_INC}- 46=PC,24,C65638,0 -{COM_RADIO_FRACT_DEC}- 47=PC,25,C65639,0 -{COM_RADIO_FRACT_INC}- 48=PC,30,C66448,0 -{NAV1_RADIO_SWAP}- 50=PC,15,C66444,0 -{COM2_RADIO_SWAP}- 51=PC,14,C66452,0 -{NAV2_RADIO_SWAP}- 52=PC,26,C65644,0 -{NAV2_RADIO_WHOLE_DEC}- 53=PC,27,C65645,0 -{NAV2_RADIO_WHOLE_INC}- 54=PC,20,C65646,0 -{NAV2_RADIO_FRACT_DEC}- 55=PC,21,C65647,0 -{NAV2_RADIO_FRACT_INC}- 56=CP(F-C,8)C,0,C65880,0 -{HEADING_BUG_DEC}- 57=CP(F-C,8)C,1,C65879,0 -{HEADING_BUG_INC}- 58=CP(F+C,8)C,0,C1024,0 -{heading bug dec fast}- 59=CP(F+C,8)C,1,C1025,0 -{heading bug inc fast}- 60=PC,7,K85,10 -{Key press: ctl+U}- 61=PC,6,K76,10 -{Key press: ctl+L}- 62=CP(F-C,9)C,2,C65662,0 -{VOR1_OBI_DEC}- 63=CP(F+C,9)C,2,C1026,0 -{vor1 obi dec fast}- 64=CP(F-C,9)C,3,C65663,0 -{VOR1_OBI_INC}- 65=CP(F+C,9)C,3,C1027,0 -{vor1 obi inc fast}- 68=PC,10,C1005,0 -{BUTTON FLAG Toggle: Joy 0 Button 0}- 69=PB,0,C1001,0 -{PTT Transmit On (SB3,RW,AVC)}- 70=UB,0,C1002,0 -{PTT Transmit Off (SB3,RW,AVC)}- 71=RB,5,C65607,0 -{ELEV_TRIM_DN}- 72=RB,4,C65615,0 -{ELEV_TRIM_UP}- 73=PB,7,K68,9 -{Key press: shft+D}- 74=PB,12,K87,8 -{Key press: W}- 75=PB,11,K87,8 -{Key press: W}- 76=PB,2,K122,8 -{Key press: F11}- 77=PB,3,C65749,0 -{VIEW_MODE_REV}- 78=PB,6,K73,9 -{Key press: shft+I}- 79=PG,24,C66293,0 -{TOGGLE_AVIONICS_MASTER}- 80=PG,25,C1062,0 -{engine 2 autostart}- 82=UG,24,CL46:R,0 -{Lua sw_sound}- 83=PG,3,C66340,0 -{TOGGLE_ELECT_FUEL_PUMP1}- 84=PG,2,C66341,0 -{TOGGLE_ELECT_FUEL_PUMP2}- 85=UG,14,CL46:R,0 -{Lua sw_sound}- 86=UG,12,CL46:R,0 -{Lua sw_sound}- 87=UG,10,CL46:R,0 -{Lua sw_sound}- 88=UG,7,CL46:R,0 -{Lua sw_sound}- 89=UG,6,CL46:R,0 -{Lua sw_sound}- 90=UG,27,CL46:R,0 -{Lua sw_sound}- 92=UG,17,CL46:R,0 -{Lua sw_sound}- 93=UG,18,CL46:R,0 -{Lua sw_sound}- 94=UG,13,CL46:R,0 -{Lua sw_sound}- 95=UG,25,CL46:R,0 -{Lua sw_sound}- 96=UG,3,CL46:R,0 -{Lua sw_sound}- 97=UG,2,CL46:R,0 -{Lua sw_sound}- 98=UG,28,CL46:R,0 -{Lua sw_sound}- 99=UG,21,CL46:R,0 -{Lua sw_sound}- 100=PG,22,C66241,0 -{TOGGLE_MASTER_BATTERY}- 101=UG,22,CL46:R,0 -{Lua sw_sound}- [Keys] 65=87,11,65749,0 -{ctl+shft+W: Press=VIEW_MODE_REV }- 66=49,11,65734,0 -{ctl+shft+1: Press=PAN_UP }- 69=71,8,L7:R,0 -{G: Press=Lua log lvars }- 71=71,9,L7:K,0 -{shft+G: Press=LuaKill log lvars (Flag 0) }- 76=113,9,L13:S,2 -{shft+F2: Press=LuaSet SlewMode (Flag 2) }- 78=114,9,L13:S,3 -{shft+F3: Press=LuaSet SlewMode (Flag 3) }- 80=115,9,L13:S,4 -{shft+F4: Press=LuaSet SlewMode (Flag 4) }- 82=116,9,L13:S,5 -{shft+F5: Press=LuaSet SlewMode (Flag 5) }- 84=117,9,L13:S,6 -{shft+F6: Press=LuaSet SlewMode (Flag 6) }- 86=118,9,L13:S,7 -{shft+F7: Press=LuaSet SlewMode (Flag 7) }- 88=120,9,L13:S,8 -{shft+F9: Press=LuaSet SlewMode (Flag 8) }- 91=119,9,L13:S,9 -{shft+F8: Press=LuaSet SlewMode (Flag 9) }- 93=122,9,L13:S,10 -{shft+F11: Press=LuaSet SlewMode (Flag 10) }- 95=123,9,L13:S,11 -{shft+F12: Press=LuaSet SlewMode (Flag 11) }- 97=118,8,L13:S,12 -{F7: Press=LuaSet SlewMode (Flag 12) }- 99=119,8,L13:S,13 -{F8: Press=LuaSet SlewMode (Flag 13) }- 103=89,9,L13:S,1 -{shft+Y: Press=LuaSet SlewMode (Flag 1) }- [MacroFiles] 1=HSI_Hdg_Sync 2=HSICrsPush 3=OpusAPKeys 5=CitX 6=HWell_AP 7=Opus 8=CitXSoftKeys 9=Pilot_DC 10=CitXDeIce 4=G1000_TOGA [LuaFiles] 1=ToggleModeC 2=B200_logolight 3=G1000AutoPilot 4=G1000_MapToggle 5=BE58_COM_TOG 6=B200_WarnOff 7=log lvars 8=C_BE58 9=B200_lyoke_hide 10=GNS530Voice 11=F1_YokeButton 12=B58YokeButton 13=SlewMode 14=LVARS_2_TXT 15=LVAR_SPECIFIC 16=Mustang_Console 17=B200_RuddrBoost 18=Mustang_YokeP 19=G1000_TWarn 20=CitX_YokeButton 21=Cit_Revrse 22=Cit_Off_Rev 24=mousemove 25=CitX_Console 35=GTX327Xpndr 36=ipcDebug 38=ModeCharlieOn 39=ModeCharlieOff 42=G1000_OBSDEC 43=G1000_OBSINC 46=sw_sound 47=voiceChecklists 49=B200_Console [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=Yes Port=COM3 Speed=19200 Interval=500 PosTo6Decimal=No SimModeIndicator=No Sentences=RMC,GGA,GSA,GSV [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=500 PosTo6Decimal=No SimModeIndicator=No Sentences= [WideServer] WideFSenabled=No [Sounds] Path=F:\FSX\Sound\ Device1=Primary Sound Driver Device2=Speakers (ASUS Xonar DGX Audio Device) Device3=Speakers (2- Realtek High Definition Audio) [Traffic Limiter] TrafficLimit=0 AirportPreference=50 GroundPreference=50 NearerPreference=50 TargetFrameRate=0 PlannedAirportsPreference=50 [Window.LUA display] Docked=7350, 2772, 3560, 3580 Undocked=0, 0, 8, 8 [Monitor] [Profile.Carenado BARON] 1=Carenado BARON [Profile.F1_Kingair_B200] 1=F1_Kingair_B200-2 2=F1_Kingair_B200-1 3=F1_Kingair_B200-4 [Profile.F1_Cessna_Mustang] 1=F1_Cessna_Mustang1 2=F1_Cessna_Mustang2 3=F1_Cessna_Mustang_N166DT [Profile.Eaglesoft Citation X] 1=Eaglesoft Citation X 2.0 N800ES WS 2=Eaglesoft Citation X 2.0 N646DT --- FSUIPC4.log --- ********* FSUIPC4, Version 4.964 (1st March 2017) by Pete Dowson ********* Windows 7 Professional 64 Bit with SP 1.0 reported as Build 7601 (OS 6.1) fsx.exe version = 10.0.61637.0 Reading options from "F:\FSX\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=68E70000 User Name="omitted" User Addr="omitted" FSUIPC4 Key is provided WIDEFS7 not user registered, or expired 16 System time = 07/03/2017 11:21:50 16 FLT path = "C:\Users\DBT\Documents\Flight Simulator X Files\" 16 ------ Module Version Check ------ 16 acontain.dll: 10.0.61637.0 16 api.dll: 10.0.61637.0 16 controls.dll: 10.0.61637.0 16 fs-traffic.dll: 10.0.61637.0 16 G3D.dll: 10.0.61637.0 16 language.dll: 10.0.61637.0 16 sim1.dll: 10.0.61637.0 16 visualfx.dll: 10.0.61637.0 16 weather.dll: 10.0.61637.0 16 window.dll: 10.0.61637.0 16 ---------------------------------- 31 Trying to connect to SimConnect Acc/SP2 Oct07 ... 47 FS path = "F:\FSX\" 141 Finished: 0 Profile files created 156 ---------------------- Joystick Device Scan ----------------------- 156 Product= 156 Manufacturer= 156 Vendor=046D, Product=C2AB (Version 0.1) 156 Serial Number= 156 Product= CH THROTTLE QUADRANT 172 Manufacturer= CH PRODUCTS 172 Vendor=068E, Product=00FA (Version 0.0) 172 Serial Number= 172 Product= Saitek Pro Flight Combat Rudder Pedals 172 Manufacturer= Saitek 172 Vendor=06A3, Product=0764 (Version 2.1) 172 Serial Number= 172 Product= Pro Flight Cessna Yoke 172 Manufacturer= Saitek 172 Vendor=06A3, Product=0BD3 (Version 1.22) 172 Serial Number= RD005891 172 Product= DTA Rotary Encoder 172 Manufacturer= Desktop Aviator 172 Vendor=16C0, Product=27CB (Version 1.33) 172 Serial Number= B45815 172 Product= DTA Rotary Encoder 172 Manufacturer= Desktop Aviator 172 Vendor=16C0, Product=27CB (Version 1.33) 172 Serial Number= B32619 187 Product= Model 2235 187 Manufacturer= Desktop Aviator 187 Vendor=16D0, Product=0488 (Version 0.1) 187 Serial Number= DTA04103 187 Product= Trim Wheel 187 Manufacturer= Desktop Aviator 187 Vendor=6017, Product=3529 (Version 0.1) 187 Serial Number= DTA01262 187 ------------------------------------------------------------------- 546 LogOptions=00000000 00000001 546 ------------------------------------------------------------------- 546 ------ Setting the hooks and direct calls into the simulator ------ 546 --- CONTROLS timer memory location obtained ok 546 --- SIM1 Frictions access gained 546 --- FS Controls Table located ok 546 --- Installed Mouse Macro hooks ok. 546 --- Wind smoothing fix is fully installed 546 --- G3D.DLL fix attempt installed ok 546 --- SimConnect intercept for texts and menus option is off 546 --- All links checked okay 546 ------------------------------------------------------------------- 546 SimConnect_Open succeeded: waiting to check version okay 546 Trying to use SimConnect Acc/SP2 Oct07 546 Opened separate AI Traffic client okay 1217 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 1217 Initialising SimConnect data requests now 1217 FSUIPC Menu entry added 1217 C:\Users\DBT\Documents\Flight Simulator X Files\FSX Startup for Complex Aircraft.FLT 1217 F:\FSX\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 86113 F:\FSX\SimObjects\Airplanes\Eaglesoft Citation X 2.0\CitationX.AIR 123803 Planned flight from KPSP to KSMX 123803 C:\Users\DBT\Documents\Flight Simulator X Files\KPSP_KSMX.PLN 131478 Aircraft loaded: running normally now ... 131478 User Aircraft ID 1 supplied, now being used 131603 System time = 07/03/2017 11:24:02, Simulator time = 11:23:58 (19:23Z) 131961 Aircraft="Eaglesoft Citation X 2.0 N646DT" 154753 Starting everything now ... 158419 Advanced Weather Interface Enabled 244469 Sim stopped: average frame rate for last 99 secs = 29.7 fps 244469 Max AI traffic was 0 aircraft 247402 === DLLStop called ... 247402 === Closing external processes we started ... 248401 === About to kill any Lua plug-ins still running ... 248557 Lua threads being terminated: 248557 0 = "F:\FSX\Modules\CitX_YokeButton.lua" 248697 LUA: "F:\FSX\Modules\CitX_YokeButton.lua": killed 248697 1 = "F:\FSX\Modules\CitX_Console.lua" 248853 LUA: "F:\FSX\Modules\CitX_Console.lua": killed 248853 2 = "F:\FSX\Modules\mousemove.lua" 249009 LUA: "F:\FSX\Modules\mousemove.lua": killed 249009 === Closing global Lua thread 250007 === About to kill my timers ... 250210 === Restoring window procs ... 250210 === Unloading libraries ... 250210 === stopping other threads ... 250210 === ... GPSout ... 250226 === ... Button scanning ... 250319 === ... Axis scanning ... 250429 === Releasing joystick devices ... 250429 === Freeing macro memory 250429 === Removing any offset overrides 250429 === Clearing any displays left 250429 === NOTE: not calling SimConnect_Close ... 250429 === AI slots deleted! 250429 === Freeing button memory ... 250429 === Closing my Windows ... 250429 === Freeing FS libraries ... 251427 === Closing devices ... 251427 === Closing the Log ... Bye Bye! ... 251427 System time = 07/03/2017 11:26:01, Simulator time = 11:25:36 (19:25Z) 251427 *** FSUIPC log file being closed Minimum frame rate was 27.6 fps, Maximum was 29.9 fps Minimum available memory recorded was 32768Mb Average frame rate for running time of 99 secs = 29.7 fps G3D fix: Passes 9690, Null pointers 0, Bad pointers 0, Separate instances 0 Maximum AI traffic for session was 0 aircraft Memory managed: 83 Allocs, 83 Freed ********* FSUIPC Log file closed *********** Hope this to be some help to you.

Its been several years since I used FSUIPC 3.999z8, but referring to my documents from the time, the ipc.macro("macroname") was available in the lua library at that time. In the keyboard assignments, the R in L24:R,0 stands for "Run" (which refers to Lua Script #24 in the FSUIPC.ini in your example) but that wasn't explained in the FSUIPC for Advanced Users released with FSUIPC 3.xxxxx, or else I couldn't find it there either. (This information is in the FSUIPC4 for Advanced Users on page 30, so I imagine the functionality was present earlier, just not elucidated in the docs.) From your code snippets, it appears the syntax you posted is correct, but as these are only snippets, there might be a syntax error somewhere else in the script or macro preventing execution. Does the mouse macro work properly when you just assign it to a key (as a test)? If so, then enable logging to see where the error is in your lua script syntax. If not, the mouse macro itself may require one of the additional <mouseflag> parameters. Some mouse macros do require them to function correctly (e.g. 12=FCU_100=RX31d10*X8bcc,17 which actually activates upon release of the mouse....) Best, Don

In a recent thread, Pete Dowson wrote: Dear Pete, Threads that go this direction sadden me. Not because of opinion differences or ruffled feathers (which is only to be expected in a written medium, where facial expression, voice intonation, body language all are missing), but because of the perception that your efforts are rarely appreciated. It is only that misconception, of which I would like to disabuse you. I, and I'm sure thousands of other enthusiasts, have nothing but the deepest appreciation and respect for your efforts, and sincere admiration that quite frequently borders on awe. In the years I have been simulating flight, there is absolutly NO product that has promoted my enjoyment of this hobby more. There is NO other application or addon that has even come close to contributing more to my understanding of the workings of FS9, FSX, and P3D more than FSUIPC. Your documentation of FSUIPC's power and scope, the inclusion of a miriad of sample lua scripts to learn from, your support though this forum, and the contributions and advices from many of the outstanding the users of this forum are extremely appreciated. I cannot renummerate the tremendous return I have received from a one-time modest investment, which even provides life-time support and updates! You and a handful of your peers are a rare and much-appreciated breed in this enthusiast field. Your efforts have provided so much more to this hobby than I can easily convey. I have never seen any program, written and maintained by a single individual, that is more conscientiously and consistently improved and updated, in which the author consistently accomodates and provides a means to incorporporate a tremedous array of end-user requests for functions, and personally answers a huge number of user questions so quickly -- frequently within an hour or two of posting. Such service and support is superlative and increasingly rare in any field in todays world, not to mention a hobbiest or enthusiast genre. If, and when, you hang it up (which I hope is later rather than sooner) -- you will leave behind a wonderful legacy and contribution to this hobby, and a void that will be all but impossible to fill. But you will NOT leave unappreciated by a huge body of flight simulation enthusiasts whose enjoyment and understanding of the hobby have been greatly enriched and enhanced by the fruits of your labors. I thank you, and salute you Pete! And by all means, damnit, get some flying time in anyway, even before you retire completely! Best, Don

The method given in the section "Calibrating Flaps with Specific Detentes" on page 50 of the FSUIPC4 User Guide.pdf works well. Don

Fantastic addition, Pete! Thank you! Don

How strange! 238 is part of the extended ASCII codes, most commonly relating to characters in Latin extended characters sets of Word Processors! Don

Oh my. :oops: