Iain Williams Posted July 17, 2015 Report Share Posted July 17, 2015 Good morning Peter I have spent close to eight hours attempting to solve this issdue, but without luck. I have attempted to connect with and without the firewall turned on using WIN 7. I have port 8002 open. Everything operated perfectly, then it just stopped. I noticed the issue when my lua call outs which are located in the Wide Client folder on the client ceased to operate. I note that a line in the log indicates the code 10061. I have attached the apropiate files for your perusal. If you need addtional information please ask. Thi is the first issure I have had concerning Wide Client I hope you have some time spare to assist me. Thank you, Iain FSUIPC4 LOG.txt Wide Client Log.txt FSUPIC ini.txt Link to comment Share on other sites More sharing options...
Luke Kolin Posted July 17, 2015 Report Share Posted July 17, 2015 Why is host "ALPHA" using a 127.x.x.x address? Cheers! Luke Link to comment Share on other sites More sharing options...
alaxus Posted July 17, 2015 Report Share Posted July 17, 2015 You have a network issue. You should not be seeing 127.0.53.53 http://serverfault.com/questions/626612/dns-just-started-resolving-my-server-prod-addresses-to-127-0-53-53 Can you post your network setup? Your internal IP(4) address should have 10.0.0.x or 192.168.x.x Cheers Link to comment Share on other sites More sharing options...
Iain Williams Posted July 18, 2015 Author Report Share Posted July 18, 2015 Hello Thank you for your replies and assistance. I have checked through the network settings and I believe everything should be as it is for WIN7 – although I not an expert. I can view files from both the client and server and several non FSUPIC programs work flawlessly. The client PC has an IP address of 10.1.1.6 while the server PV has an IP address of 10.1.1.5. I am uncertain why the program reads 127.0.53.53. I have attached screenshots of my settings. I have little doubt that the issue lies with something that has occurred during networking and appreciate any comments and help. By the way, everyhting works perfectly unril recently, so I am unsure what jas been altered to casue Wide Client ot operate correctly. Thanks, Iain Link to comment Share on other sites More sharing options...
Luke Kolin Posted July 18, 2015 Report Share Posted July 18, 2015 You have name resolution problems, not address issues. You could probably tell WideClient to connect to the IP address instead of the name, or use a fully qualified host name in DNS. (If you don't know how to do the latter, do the former.) Cheers! Luke Link to comment Share on other sites More sharing options...
Iain Williams Posted July 19, 2015 Author Report Share Posted July 19, 2015 Hello Luke Thanks for the note. I have attemped this by altering the .ini file to refer to the server's IP address which is 10.1.1.5; however, wide client does not connect. Perhaps I am writing the incorrect sytax in the .ini file (?) I am selecting the name of the server PC (ALPHA). Below is the sytax I am using in the .ini file. WIDE CLIENT .INI FILE ; PLEASE SEE WideFS documentation for parameter details; =====================================================[Config]Port=8002ServerName=ALPHAProtocol=TCPWindow=0,0,112,27Visible=YesButtonScanInterval=20ClassInstance=0NetworkTiming=5,1MailslotTiming=2000,1000PollInterval=2000Port2=9002ResponseTime=18ApplicationDelay=0TCPcoalesce=NoWaitForNewData=500MaxSendQ=100OnMaxSendQ=LogNewSendScanTime=50Priority=3,1,2Port=8002; -----------------------------------------------[user]Log=Errors+; ===============================================[sounds]Path=C:\Wide Client\Sound\Device1=Primary Sound DriverDevice2=Speakers (Realtek High Definition Audio)Device3=Realtek Digital Output(Optical) (Realtek High Definition Audio)Device4=Realtek Digital Output (Realtek High Definition Audio)Here is a copy of the log generated for the above .ini file LOG FILE ********* WideClient Log [version 6.86] Class=FS98MAIN *********Date (dmy): 19/07/15, Time 14:06:25.469: Client name is AVIONICS 63 LUA: "C:\Wide Client\Initial.LUA": not found 63 Attempting to connect now 63 Trying TCP/IP host "ALPHA" port 8002 ... 63 ... Okay, IP Address = 127.0.53.53 1092 Error on client pre-Connection Select() [Error=10061] Connection refused 1092 Ready to try connection again 2137 Attempting to connect now 3120 New Client Application: "FsRaas20" (Id=4340) 61855 Trying TCP/IP host "ALPHA" port 8002 ... 61855 ... Okay, IP Address = 127.0.53.53 I can see the IP address; however, I do not know how it can be changed. Can you please tell me what I am doing incorrectly? Thank you, Iain Link to comment Share on other sites More sharing options...
Luke Kolin Posted July 19, 2015 Report Share Posted July 19, 2015 Iain, as I told you - you have a name resolution problem. Putting in the computer name will NOT work. What is the log when you specified an IP address? Is port 8002 open on the server? Are you certain? Cheers! Luke Link to comment Share on other sites More sharing options...
Iain Williams Posted July 20, 2015 Author Report Share Posted July 20, 2015 Hello Luke I reinstalled wide client (easy to do) and flushed the IP address cache on the client computer (I had not done this before). I then altered the .ini to read the correct IP address for the server by adding the line ServerIPaddr= xx.x.x.x. (xx being the server IP address). I then checked the port was not blocked by the firewall - it wasn't. Everything seems to work now and wide clinent connects with the server. I am unsure why the issue occurred, but the log file now states that the server IP address is being read correctly. Thank you for your time and patience and fingers crossed the issue will not occur again. Cheers, Iain Link to comment Share on other sites More sharing options...
krishna Posted July 23, 2015 Report Share Posted July 23, 2015 Hi Luke, I went through the above thread and was glad to see that the problem was resolved with your inputs. I am facing similar issues as well. following is the WideClient log: ********* WideClient Log [version 6.999n] Class=FS98MAIN ********* Date (dmy): 17/07/15, Time 13:25:16.797: Client name is FLIGHTSIM1-PC 47 LUA: "C:\Users\FlightSim1\Desktop\Initial.LUA": not found 63 Attempting to connect now 63 Trying to locate server: Need details from Server Broadcast 63 Failed to connect: waiting to try again 2122 Attempting to connect now 45366 Trying to locate server: Need details from Server Broadcast 16599443 ****** End of session performance summary ****** 16599443 Total time connected = 0 seconds 16599443 Reception maximum: 0 frames/sec, 0 bytes/sec 16599443 Transmission maximum: 0 frames/sec, 0 bytes/sec 16599443 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 16599443 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) ********* I have changed the parameters in the .ini file, added the serverIPaddress and server name with protocol as TCP but I am afraid the issue is not resolved. WideClient is not connecting to the server. I am sure I am missing out on something. Please ask me questions/information relevant to this. I have total 4 systems on the network (ethernet). FSUIP and WideFS registered on the server. networking is done with static IP having 192.168.x.x format. I am not an expert or even anywhere close on networking and softwares, but I am sure with your input I should be able to resolve this. Thanks in advance cheers Krishna Link to comment Share on other sites More sharing options...
krishna Posted July 23, 2015 Report Share Posted July 23, 2015 here is the latest log after specifying the IP address in the .ini configuration: ********* WideClient Log [version 6.999n] Class=FS98MAIN ********* Date (dmy): 23/07/15, Time 15:15:36.287: Client name is FOPC 63 LUA: "C:\Users\FlightSim1\Desktop\WideClient\Initial.LUA": not found 63 Attempting to connect now 63 Trying TCP/IP addr 192.168.1.7, port 8002 ... 1077 Error on client pre-Connection Select() [Error=10061] Connection refused 1077 Ready to try connection again 2138 Attempting to connect now 61855 Trying TCP/IP addr 192.168.1.7, port 8002 ... 155034 ****** End of session performance summary ****** 155034 Total time connected = 0 seconds 155034 Reception maximum: 0 frames/sec, 0 bytes/sec 155034 Transmission maximum: 0 frames/sec, 0 bytes/sec 155034 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 155034 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) ********* cheers!! krishna Link to comment Share on other sites More sharing options...
Iain Williams Posted July 23, 2015 Author Report Share Posted July 23, 2015 Hi Krishna To remove the 63 LUA: "C:\Users\FlightSim1\Desktop\WideClient\Initial.LUA": not found line, you need to include a .TXT file with the file name initial.lua. The file does not contain any syntax and the filename is what initiates any lua scripts you have. The file and any lua scrips are placed in your wide client .ini folder. I will leave the rest to someone more knowledable. Best of luck - problems such as this can be frustrating, Iain Link to comment Share on other sites More sharing options...
Pete Dowson Posted July 23, 2015 Report Share Posted July 23, 2015 63 Trying TCP/IP addr 192.168.1.7, port 8002 ... 1077 Error on client pre-Connection Select() [Error=10061] Connection refused That's almost certainly a firewall problem. You either need to completely disable the firewall on the FS PC, or allow port 8002 and/or WideClient.exe proper entry (never sure which it is you do -- probably depends on the firewall).. I don't use firewalls between the PCs on my Network, only on the Router connecting everything to the outside world. I've always found it a bit of a nightmare trying to get permissions right. BTW, since you aren't using the Broadcasts from the Server, the Client won't know which Protocol it is supposed to use, so you need to set the Protocol parameter in its INI as well as the ServerIPAddr. Pete Link to comment Share on other sites More sharing options...
Pete Dowson Posted July 23, 2015 Report Share Posted July 23, 2015 To remove the 63 LUA: "C:\Users\FlightSim1\Desktop\WideClient\Initial.LUA": not found line, you need to include a .TXT file with the file name initial.lua. The file does not contain any syntax and the filename is what initiates any lua scripts you have. The file and any lua scrips are placed in your wide client .ini folder. There's no point doing that. The line is NOT an error, it is just an informative line, in case you did want an initial plug-in to run and had simply spelled the filename incorrectly. Most lines in WideFS and FSUIPC logs are for information, NOT to warn of any problems! The ones telling of problems will say so. Pete Link to comment Share on other sites More sharing options...
Iain Williams Posted July 23, 2015 Author Report Share Posted July 23, 2015 There's no point doing that. The line is NOT an error, it is just an informative line, in case you did want an initial plug-in to run and had simply spelled the filename incorrectly. Most lines in WideFS and FSUIPC logs are for information, NOT to warn of any problems! The ones telling of problems will say so. Pete I stand corrected - thanks Peter, Iain Link to comment Share on other sites More sharing options...
krishna Posted July 23, 2015 Report Share Posted July 23, 2015 Hi Peter, Thanks for a quick reply. I disabled the firewall from all the systems after reading the WideFS user guide, after writing the last post here I realized that i should have mentioned the same. so the firewalls are disabled. I was getting fixated on the LUA statement as well but now that you have clarified about the same, I am relieved on that. I am still unsure what could be cause of server not connecting to the client. I registered FSUIPC and WideFS again hoping that the same would sort out the issue but to my disappointment nothing changed. Krishna Link to comment Share on other sites More sharing options...
Pete Dowson Posted July 23, 2015 Report Share Posted July 23, 2015 I disabled the firewall from all the systems after reading the WideFS user guide, after writing the last post here I realized that i should have mentioned the same. so the firewalls are disabled. Well, something is acting as a firewall, because error 10061 is described by Microsoft as: No connection could be made because the target machine actively refused it. Every time this has occurred in the past it has been firewall type protection on the FS PC. I doubt yours is an exception. Check any add-on security software as well as Windows' firewall. Most anti-virus packages also add network protection. The only other thing I know which could actively stop a connection is something already using the port (8002), but that normally gives a different error, like "timed out", because the port owner doesn't recognise WideClient. You could change the port as a test (needs parameters changed in both WideClient.INI and FSUIPC4.INI). I registered FSUIPC and WideFS again hoping that the same would sort out the issue but to my disappointment nothing changed. FSUIPC doesn't need registering at all for WideFS to work. If WideFS wasn't registered the Server wouldn't start and you'd see this in the FSUIPC options and in the WideServer.LOG. Which reminds me. You've not posted your FSUIPC4.LOG or WideServer.LOG files from the FS PC, have you? Best post them as well just to double check from that end. Pete Link to comment Share on other sites More sharing options...
krishna Posted July 23, 2015 Report Share Posted July 23, 2015 Every time this has occurred in the past it has been firewall type protection on the FS PC. I doubt yours is an exception. Check any add-on security software as well as Windows' firewall. Most anti-virus packages also add network protection. Hi Peter, I am in the process of rechecking the server PC for anything that might be acting as a firewall and thereby causing a conflict. Here are the FSUIPC4.log and WideServer.log files respectively for your ready reference: ********* FSUIPC4, Version 4.939u by Pete Dowson ********* Reading options from "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Modules\FSUIPC4.ini" Running inside FSX on Windows 7 Module base=62AA0000 User Name="shashank gupta" User Addr="udaanaviation@gmail.com" FSUIPC4 Key is provided WideFS7 Key is provided 0 System time = 23/07/2015 16:45:11 0 FLT UNC path = "\\PRIMARY\Users\Udaan\Documents\Flight Simulator X Files\" 281 Trying to connect to SimConnect Acc/SP2 Oct07 ... 297 FS UNC path = "\\PRIMARY\C drive udaan pc\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\" 422 LogOptions=00000000 00000001 422 --- CONTROLS timer memory location obtained ok 422 --- SIM1 Frictions access gained 422 --- FS Controls Table located ok 422 --- Installed Mouse Macro hooks ok. 422 --- Wind smoothing fix is fully installed 422 --- G3D.DLL fix attempt installed ok 422 SimConnect_Open succeeded: waiting to check version okay 422 Trying to use SimConnect Acc/SP2 Oct07 1545 Running in "Microsoft Flight Simulator X", Version: 10.0.61637.0 (SimConnect: 10.0.61259.0) 1545 Initialising SimConnect data requests now 1545 FSUIPC Menu entry added 1545 \\PRIMARY\C drive udaan pc\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\FLIGHTS\OTHER\FLTSIM.FLT 1545 \\PRIMARY\C drive udaan pc\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\Aircreation_582SL\Aircreation_582SL.AIR 5757 \\PRIMARY\C drive udaan pc\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\a320 FMGS JH Project Airbus A320-214\pa320-cfm56-2.AIR -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ********* WideServer.DLL Log [version 7.939u] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 15/07/15, Time 12:54:41.102: Server name is UDAAN-PC 15600 Initialising TCP/IP server 15600 Initialising UDP/IP server 16115 Broadcasting service every 1000 mSecs 1808317 Closing down now ... Memory managed: Offset records: 804 alloc, 803 free Read buffer usage: 0 alloc, 0 free, max in session: 0 Write buffer usage: 0 alloc, 0 free, max in session: 0 Throughput maximum achieved: 0 frames/sec, 0 bytes/sec Throughput average achieved for complete session: 0 frames/sec, 0 bytes/sec ********* Log file closed ********* ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ********* WideServer.DLL Log [version 7.939u] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 15/07/15, Time 12:01:15.865: Server name is UDAAN-PC 15631 Initialising TCP/IP server 15631 Initialising UDP/IP server 16130 Broadcasting service every 1000 mSecs ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Thanks Krishna Link to comment Share on other sites More sharing options...
Pete Dowson Posted July 23, 2015 Report Share Posted July 23, 2015 The logs are okay, though the current ones are incomplete. When posting logs please close FS first, as there is useful information logged at the end, on closure. You don't need to post Logs which don't have the normal name (FSUIPC4.LOG, WideClient.LOG, WideServer.LOG). The ones with another number (1 usually) before the .LOG part are previous copies, saved in case your sim does an auto-restart on a crash (which would else destroy the possibly relevant log). Pete Link to comment Share on other sites More sharing options...
krishna Posted July 27, 2015 Report Share Posted July 27, 2015 Hi Peter Hope you doing well. I reinstalled the WideClient.exe on client stations, flushed the DNS cache, added ServerIPaddr to the .ini file and fortunately WideFS on the client stations was finally connected. this happened on friday. But today again to my disappointment the situation is back to what it was. WideFS says it is waiting for connection. I have tried everything that may have worked on friday but have not seen any success so far. following are the WideServer and WideClient logs for your reference. ********* WideServer.DLL Log [version 7.939u] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 24/07/15, Time 14:49:32.550: Server name is PRIMARY 15787 Initialising TCP/IP server 15803 Initialising UDP/IP server 16146 Incoming connection Accepted ok (skt=9408) TCP 16146 Broadcasting service every 1000 mSecs 16349 Connected to computer "FOPC" running WideClient version 6.999 (skt=9408) TCP 40997 Error 10053: client socket disconnected at Client: removing (skt=9408) TCP 50794 Restarting service due to zero reception! 181148 Incoming connection Accepted ok (skt=4200) TCP 181273 Incoming connection Accepted ok (skt=9400) TCP 181460 Connected to computer "FOPC" running WideClient version 6.999 (skt=9400) TCP 577734 Incoming connection Accepted ok (skt=9416) TCP 578498 Connected to computer "CAPTAIN-PC" running WideClient version 6.999 (skt=9416) TCP 626516 Incoming connection Accepted ok (skt=8160) TCP 633083 Connected to computer "CENTER-PC" running WideClient version 6.999 (skt=8160) TCP 2936095 Error 10054: client socket disconnected at Client: removing (skt=8160) TCP 2970852 Error 10054: client socket disconnected at Client: removing (skt=9400) TCP 3025998 Incoming connection Accepted ok (skt=9400) TCP 3026310 Connected to computer "FOPC" running WideClient version 6.999 (skt=9400) TCP 4551750 Error 10054: client socket disconnected at Client: removing (skt=9416) TCP 7142880 Incoming connection Accepted ok (skt=9752) TCP 7143192 Connected to computer "FOPC" running WideClient version 6.999 (skt=9752) TCP 7146671 Incoming connection Accepted ok (skt=9332) TCP 7146827 Connected to computer "CENTER-PC" running WideClient version 6.999 (skt=9332) TCP 7150555 Incoming connection Accepted ok (skt=9432) TCP 7150665 Connected to computer "CAPTAIN-PC" running WideClient version 6.999 (skt=9432) TCP 8799189 Error 10053: client socket disconnected at Client: removing (skt=9332) TCP 8947219 Error 10054: client socket disconnected at Client: removing (skt=9752) TCP ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ********* WideClient Log [version 6.999n] Class=FS98MAIN ********* Date (dmy): 27/07/15, Time 15:12:09.384: Client name is CENTER-PC 47 LUA: "C:\Users\FlightSim2\Desktop\WideClient\Initial.LUA": not found 47 Attempting to connect now 47 Trying TCP/IP addr 192.168.1.4, port 8002 ... 1061 Error on client pre-Connection Select() [Error=10061] Connection refused 1061 Ready to try connection again 2122 Attempting to connect now 16193 ****** End of session performance summary ****** 16193 Total time connected = 0 seconds 16193 Reception maximum: 0 frames/sec, 0 bytes/sec 16193 Transmission maximum: 0 frames/sec, 0 bytes/sec 16193 Max receive buffer = 0, Max send depth = 0, Send frames lost = 0 16193 ********* Log file closed (Buffers: MaxUsed 0, Alloc 0 Freed 0 Refused 0) ********* ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- would you please look into it and bail me out. Thanks in advance Krishna Link to comment Share on other sites More sharing options...
Pete Dowson Posted July 27, 2015 Report Share Posted July 27, 2015 Hope you doing well. I reinstalled the WideClient.exe on client statins, flushed the DNS cache, added ServerIPaddr to the .ini file and fortunately WideFS on the client stations was finally connected. this happened on friday. But today again to my disappointment the situation is back to what it was. WideFS says it is waiting for connection. I have tried everything that may have worked on friday but have not seen any success so far. following are the WideServer and WideClient logs for your reference. The Server log is from the 24th July whilst the Client log is from the 27th! The Server log shows some connection but with problems and no actual data transfers, the Client log shows your original firewall type rejection. Since neither WideServer nor WideClient can re-program themselves and change their behaviour between those two dates, something else is changing on your system. I'm afraid I have no way of identifying what that might be. And even though you say "fortunately WideFS on the client stations was finally connected. this happened on friday", from the Friday log you show above there was certainly no data connection, only problems. The Server saw the Client, but no data could be exchanged I still believe that's a firewall or virus checker's protection sort of block. There's no other information which can be gleaned from these logs, and I'm afraid there's no better information which can be obtained from Windows by my programs -- those errors are all it gives. Nevertheless, in future, please show the logs from Server and Client which actually correspond with each other -- i.e. show the same session. Pete Link to comment Share on other sites More sharing options...
krishna Posted July 27, 2015 Report Share Posted July 27, 2015 Seems like I need to dive deeper into my systems security and network settings. Thanks for your time and support Peter. Have a good day ahead. Link to comment Share on other sites More sharing options...
krishna Posted July 29, 2015 Report Share Posted July 29, 2015 Good morning Peter Hope you doing fine. After a lot of efforts, I could connect the clients to the server. However the server can only see/identify the clients but no data transfer or interaction with them. I am sending the logs from the server and one of three clients (other two client logs are identical). As per your convenience, please look into the matter. ********* WideServer.DLL Log [version 7.939u] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 29/07/15, Time 11:42:36.651: Server name is PRIMARY 15787 Initialising TCP/IP server 15787 Initialising UDP/IP server 16036 Incoming connection Accepted ok (skt=9468) TCP 16146 Broadcasting service every 1000 mSecs 16192 Connected to computer "CENTER-PC" running WideClient version 6.999 (skt=9468) TCP 16286 Incoming connection Accepted ok (skt=9476) TCP 16551 Connected to computer "FOPC" running WideClient version 6.999 (skt=9476) TCP 20732 Incoming connection Accepted ok (skt=9480) TCP 20982 Connected to computer "CAPTAIN-PC" running WideClient version 6.999 (skt=9480) TCP 86097 Auto send stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP 92695 Close signalled to clients 93787 Closing down now ... Memory managed: Offset records: 107 alloc, 106 free Read buffer usage: 94 alloc, 94 free, max in session: 1 Write buffer usage: 6322 alloc, 6322 free, max in session: 1 Throughput maximum achieved: 60 frames/sec, 1739 bytes/sec Throughput average achieved for complete session: 19 frames/sec, 535 bytes/sec Average receive rate from "FOPC": 0 frames/sec, 17 bytes/sec Average receive rate from "CAPTAIN-PC": 0 frames/sec, 16 bytes/sec Average receive rate from "CENTER-PC": 0 frames/sec, 16 bytes/sec ********* Log file closed ********* ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ********* WideClient Log [version 6.999n] Class=FS98MAIN ********* Date (dmy): 29/07/15, Time 11:41:57.199: Client name is FOPC 62 LUA: "C:\Users\FlightSim1\Desktop\WideClient\Initial.LUA": not found 62 Attempting to connect now 62 Trying TCP/IP addr 192.168.1.4, port 8002 ... 1076 Error on client pre-Connection Select() [Error=10061] Connection refused 1076 Ready to try connection again 2137 Attempting to connect now 61823 Trying TCP/IP addr 192.168.1.4, port 8002 ... 76238 Connection made okay! 146064 Received shutdown offset code = ADBC 146064 FS closing down (param=ADBC), disconnecting 146064 ********* Interim performance summary ********* 146064 Total time connected so far = 69 seconds 146064 Reception maximum so far: 20 frames/sec, 582 bytes/sec 146064 Reception average whilst connected so far: 18 frames/sec, 491 bytes/sec 146064 Transmission maximum so far: 0 frames/sec, 19 bytes/sec 146064 Transmission average whilst connected so far: 0 frames/sec, 24 bytes/sec 146064 Max receive buffer = 548, Max send depth = 1, Send frames lost = 0 146064 *********************************************** 146173 Received shutdown offset code = ADBC 153770 Connection closed by server! 153770 Attempting to connect now 153770 Trying TCP/IP addr 192.168.1.4, port 8002 ... 158606 ****** End of session performance summary ****** 158622 Total time connected = 69 seconds 158622 Reception maximum: 20 frames/sec, 582 bytes/sec 158622 Reception average whilst connected: 18 frames/sec, 491 bytes/sec 158622 Transmission maximum: 0 frames/sec, 19 bytes/sec 158622 Transmission average whilst connected: 0 frames/sec, 24 bytes/sec 158622 Max receive buffer = 548, Max send depth = 1, Send frames lost = 0 158622 ********* Log file closed (Buffers: MaxUsed 2, Alloc 1290 Freed 1290 Refused 0) ********* --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Thanks in advance Cheers Krishna Link to comment Share on other sites More sharing options...
Pete Dowson Posted July 29, 2015 Report Share Posted July 29, 2015 Hope you doing fine. After a lot of efforts, I could connect the clients to the server. However the server can only see/identify the clients but no data transfer or interaction with them. I am sending the logs from the server and one of three clients (other two client logs are identical). As per your convenience, please look into the matter. This is exactly as it has always been. The Server is blocking the Client. They are never truly "connected" because you have something preventing this. I really cannot diagnose it from here other than to tell you that. You need to find out what is blocking it and stop it. One little thing you could try is change the protocol to UDP. If that fixes it then the problem would be the Port is being blocked or used by another program. Of course, you did try changing the port as I suggested, didn't you? (Remember way back I said "The only other thing I know which could actively stop a connection is something already using the port (8002), but that normally gives a different error, like "timed out", because the port owner doesn't recognise WideClient. You could change the port as a test (needs parameters changed in both WideClient.INI and FSUIPC4.INI."?) The only disadvantages of UDP are that it is unchecked and not ordered. If a frame gets an error it isn't automatically repeated, and frames can get out of sequence. For many things (eg driving moving maps or instrumentation) neither of these problems matter. UDP is actually faster because of the absence of a lot of the checking and red tape associated with TCP. Pete Link to comment Share on other sites More sharing options...
krishna Posted July 29, 2015 Report Share Posted July 29, 2015 One little thing you could try is change the protocol to UDP. If that fixes it then the problem would be the Port is being blocked or used by another program. Of course, you did try changing the port as I suggested, didn't you? I changed the protocol to UDP but sadly no change is the status- it shows connected as earlier but not truly "connected" as you mentioned in the last post. Then I changed the port to 8003( protocol was kept as UDP), in this case not even the connection was established. How can I find out the ports and also which one is free. Kindly assist me with this basic issue. Thanks Link to comment Share on other sites More sharing options...
Pete Dowson Posted July 29, 2015 Report Share Posted July 29, 2015 Then I changed the port to 8003( protocol was kept as UDP), in this case not even the connection was established. Did you change it at both ends -- [WideServer] section in the FSUIPC4.INI file and in the Wideclient.INI. If not there's no chance! How can I find out the ports and also which one is free. Sorry, I don't know. I'm sure there's a utility which can tell you, but we'd need to search. Can you use Google? Pete Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now