np444 Posted January 14, 2020 Report Share Posted January 14, 2020 Hello, I bought the feelthere Embraer 170-190 V3 today and I loaded up and I have 10 fps. In all other addon aircraft i maintain a stable 30fps but only when I go into the emb190 V3, I get 10 fps. I have already tried the other solutions on the forum and none of them worked. I just spent near enough 50 quid on this amazing looking addon but for this to happen is very disappointing. Plz adivse. Thanks Link to comment Share on other sites More sharing options...
scoobflight Posted January 14, 2020 Report Share Posted January 14, 2020 What settings are you using? What remediation steps have you taken to increase framerates that are outlined in the forum? Details are needed for support to occur. Link to comment Share on other sites More sharing options...
np444 Posted January 14, 2020 Author Report Share Posted January 14, 2020 Well I have tried lowering the FPS display setting to see if that made any difference but it didn’t. They are all now sitting around 35% each. I tried loading with my joystick unplugged and that didn’t make any difference. Neither did disabling my anti-virus. My P3D settings are pretty standard. Would you like them in full? Link to comment Share on other sites More sharing options...
Matty260191 Posted January 14, 2020 Report Share Posted January 14, 2020 What PC spec are you using? Settings? Scenerys? Link to comment Share on other sites More sharing options...
scoobflight Posted January 14, 2020 Report Share Posted January 14, 2020 Have you adjusted the gauge refresh rates using the configuration utility (see manual)? Link to comment Share on other sites More sharing options...
np444 Posted January 14, 2020 Author Report Share Posted January 14, 2020 If you mean the sliders under the FPS section then yes I have. Is there an ideal setting because it won’t make a difference even when I run it as administrator. I have an intel i7 6700k Nvidia GTX 1050 2GB Ram 16GB Plenty of HDD and SSD space I loaded up at Aerosoft Heathrow with the FsLabs and managed to get 30 fps but when i loaded up with the embraer it was 10 fps. Thanks for all the quick replies btw! Link to comment Share on other sites More sharing options...
Matty260191 Posted January 14, 2020 Report Share Posted January 14, 2020 Sounds like you have something going on that isn't working with the EMB. Link to comment Share on other sites More sharing options...
np444 Posted January 14, 2020 Author Report Share Posted January 14, 2020 (edited) Any idea what that could be? I just spent £50 on this and it is impossible to use. Other people have been having massive fps issues with the V3 aswell Edited January 14, 2020 by np444 Link to comment Share on other sites More sharing options...
Matty260191 Posted January 14, 2020 Report Share Posted January 14, 2020 I saw something about turning real time protection off one sec ill find the post Link to comment Share on other sites More sharing options...
Matty260191 Posted January 14, 2020 Report Share Posted January 14, 2020 Link to comment Share on other sites More sharing options...
np444 Posted January 14, 2020 Author Report Share Posted January 14, 2020 Yes I tried turning my antivirus (mcafee real time protection) off but that had no difference at all 😞 Link to comment Share on other sites More sharing options...
scoobflight Posted January 14, 2020 Report Share Posted January 14, 2020 4 minutes ago, np444 said: Yes I tried turning my antivirus (mcafee real time protection) off but that had no difference at all 😞 You are also confirming windows antivirus isn't running? Link to comment Share on other sites More sharing options...
scoobflight Posted January 14, 2020 Report Share Posted January 14, 2020 1 hour ago, np444 said: If you mean the sliders under the FPS section then yes I have. Is there an ideal setting because it won’t make a difference even when I run it as administrator. The sliders adjust how often the gauges refresh. Each system is different, say thanks to IBM for decisions made in the early 80s for that, so each computer had a different sweet spot. If you have adjusted to lowest refresh rates for all gauges you system has another bottleneck that needs to be found. Custom shaders? High settings on P3D? Other custom add-ons? Link to comment Share on other sites More sharing options...
np444 Posted January 14, 2020 Author Report Share Posted January 14, 2020 Yes all my antivirus was off I use tomato shade My P3D settings are medium I use Orbx base along with black marble night lights Have 10fps at night and day Link to comment Share on other sites More sharing options...
scoobflight Posted January 14, 2020 Report Share Posted January 14, 2020 8 minutes ago, np444 said: Yes all my antivirus was off I use tomato shade My P3D settings are medium I use Orbx base along with black marble night lights Have 10fps at night and day And have you tried turning these off? Link to comment Share on other sites More sharing options...
np444 Posted January 14, 2020 Author Report Share Posted January 14, 2020 Just tried it and it made no difference at all. Even tried reinstalling the embraer but nothing happened. Plz advise Link to comment Share on other sites More sharing options...
scoobflight Posted January 14, 2020 Report Share Posted January 14, 2020 Change base P3D visual/graphic settings. Change GPU settings. Confirm no unnecessary utilities or programs are running when playing P3D. Link to comment Share on other sites More sharing options...
np444 Posted January 14, 2020 Author Report Share Posted January 14, 2020 I have noticed that P3D uses all the GPU and memory with this aircraft but not with any others. Anything I can do to stop this? Link to comment Share on other sites More sharing options...
scoobflight Posted January 14, 2020 Report Share Posted January 14, 2020 As I wrote above - Something on your system is causing an issue. Yes it will take some playoffs around to find what. Sadly, as I also wrote, each PC is different and there are rare instances with software-to-software and/or software -to-hardware conflicts. Link to comment Share on other sites More sharing options...
np444 Posted January 15, 2020 Author Report Share Posted January 15, 2020 Yes but I have no issues with any other plane. It is only the Embraer V3. If I load up at heathrow with the FsLabs it get a stable 30fps in the VC but if I load up in the Embraer V3 it is suddenly 10fps in the VC and 15 outside. Must be something wrong with the embraer no? If i unplug my joystick it makes no difference. Link to comment Share on other sites More sharing options...
scoobflight Posted January 15, 2020 Report Share Posted January 15, 2020 Others, vast numbers, don't have FPS issues. Please check your system as I noted above. Link to comment Share on other sites More sharing options...
np444 Posted January 26, 2020 Author Report Share Posted January 26, 2020 So I have tried everything on this forum: changing P3D settings, disabling antivirus, changing gauge refresh rates, even disabling the F/O gauges but still I have very bad fps and stutters even at small regional airports. This not only occurs in the Embraer 190 but also in the 170. Disabling tomato shade, dynamic reflections, UT Live etc makes absoloutely no difference and still I have no issues on any other complex aircraft. I would love to be able to use this add on as it looks amazing but I cannot at the moment. My system is fine. My pc is powerful, 2 years old and in good condition. I have an intel i7 6700k, Nvidia 1050, 2TB HDD space, 250 GB of SSD space and 16GB of ram. Plz advise, Thanks Link to comment Share on other sites More sharing options...
scoobflight Posted January 26, 2020 Report Share Posted January 26, 2020 you need to start looking at other setting on the PC. other background programs? settings for the GPU & its driver. etc. Link to comment Share on other sites More sharing options...
np444 Posted January 26, 2020 Author Report Share Posted January 26, 2020 I have never changed a single setting on the GPU. It is exactly how It came as. The drivers are all up to date and there are no non-essential background programs running whilst P3D is Link to comment Share on other sites More sharing options...
scoobflight Posted January 26, 2020 Report Share Posted January 26, 2020 19 minutes ago, np444 said: I have never changed a single setting on the GPU. It is exactly how It came as you have never updated your GPU driver? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now