English Rebel

Pete So I can add the programs I wish to run in WideClient instead of starting them manually! I will try that as it is a better way of starting them. However as you noted, I don't see problems right away -- only after a period of time. I think the program log file may be the way to go. Still don't understand why I'm the only JET45 user who is having this problem. If, as you point out, there is nothing in the WideClient log that is out of the ordinary and I'm not losing my connection, then I have to surmise that there is something else in play here. Thanks Alan

Pete I asked the JET45 people to see if logging their programs was possible (don't see why not). But here's the weird thing. Yesterday I decided to run just on DU so I started InterfaceIT, my EICAS, the standby gauge programs and both engines at idle (to produce some data flow). After an hour it was fine so I started the PFD program followed an hour later by the MFD. Everything (I never started the RMUs) ran just fine for about 5 hours until we had a bad storm and the PCs rebooted because of a power blip. Seems that the issue I'm having only occurs if I start all programs at once. Everyone else does that by putting all their program shortcuts in the START folder so I'm not sure why it's just me. Hopefully a program log file will reveal all. Thanks Alan

I have asked the Jet45 people but they seem to think it's a network connection issue -- which would seem to be borne out by the fact that the standby gauges keep disconnecting (or losing connections) and then reconnecting. I didn't try using the TPC protocol without the CWP program. I'll try that today but don't hold out much hope as this problem started long before I installed it. I'll try running just the EICAS program as that is the one that has the most data updating. Would enabling a more detailed log with just this one program running still produce too much data to review? Thanks Alan

Pete I did not run the Jet45_CWP_Driver program as the developer is checking into why I got such high data rates before so I wanted to eliminate that. Yes I did restart InterfaceIT (which is the Flight Deck Solutions connection board interface program). I'm not really running FS at speed right now (and those frame rates are for the client PC with the nVIDIA GTX580 GPU) -- the Lear45 is just sitting on the tarmac with the engines running to see if I can eliminate the issues I'm having -- which brings me to those issues. I can start a new thread if you wish as I think we may have eliminated connection issues. Okay here goes. All of these programs run various displays on my MIP monitors. I'm not sure exactly how they communicate with FSX but I assume they read mostly (FROM FS) so they can display the values and flight parameters on the MIP displays. All of the hardware is connected through InterfaceIT using standard offsets so that communication would mainly be TO FS. JET45_PFD -- my primary flight display (DU1) JET45_DU2 -- my EICAS JET45_DU3 -- my multi function display JET45_ RMU_PILOT -- the pilots radio management unit (static graphics display only) JET45_RMU-FO -- the first officers radio management unit (static graphics display only) PokeysRMUNoGear -- the program that runs the RMUs for the COM and NAV etc. values and buttons and encoder functions LJ45_ADI -- the program that displays the Standby ADI LJ45_ASI -- the program that displays the Standby ASI LJ45_Altimeter -- the program that displays the Standby altimeter. Now to my problem. I can start my simulator and all is fine until about 10 - 15 minutes in when all of the standby gauges start flashing 'Not Connected" (that's normal if not connected) on and off and I get the messages in the FSX window saying for instance LJ45 ADI Connected (presumably because it disconnected and then reconnected). Shortly thereafter (or sometimes at the same time) I start getting strange values for fuel flow and fuel capacities in the EICAS display. Starts off small then goes to hundreds of thousands of pounds per hour (the values over run the flow rate display areas -- obviously). It seems as if the EICAS is reading (or interpreting) wrong values from FSX -- more likely the latter. If it was a simple matter of a lost connection then I would have thought that the current values would just freeze. Now that doesn't seem to be the case for the standby gauges -- not sure what's going on there. Hope this sheds some light on my issues that you may be able to pinpoint a solution (fingers crossed). :???: Thanks Alan

Pete I changed the protocol to UDP and ran FSX. I had issues with my displays (same as previous) that pointed toward a network issue again, but in looking at the client log file I dont see anything unusual. Can you please verify that. If this looks okay then my issue must lay somewhere else. Thanks Alan ********* WideClient Log [version 6.991] Class=FS98MAIN ********* Date (dmy): 06/05/13, Time 12:53:32.615: Client name is AVIONICS 78 Attempting to connect now 78 Trying UDP/IP addr 192.168.0.1, port 8002 ... 78 LUA: "C:\Program Files (x86)\WideFS\Initial.LUA": not found 78 UDP connectionless mode set up okay! 15694 Connection made: receiving okay! 21824 New Client Application: "Jet45_PFD" (Id=8940) 22745 New Client Application: "Jet45_MFD DU2" (Id=9432) 24008 New Client Application: "Jet45_RMU PILOT" (Id=6508) 24976 New Client Application: "Jet45_RMU FO" (Id=2748) 25272 New Client Application: "Jet45_MFD DU3" (Id=6348) 26832 New Client Application: "PokeysRMUNoGear" (Id=6412) 28829 New Client Application: "LJ45_ADI" (Id=9536) 29609 New Client Application: "lj45_Altimeter" (Id=6304) 41496 New Client Application: "LJ45_ASI" (Id=7948) 46129 New Client Application: "interfaceIT" (Id=9484) 379035 New Client Application: "interfaceIT" (Id=9972) 846508 New Client Application: "FSInterrogate2std" (Id=4624) 1611287 Received shutdown offset code = ADBC 1611287 FS closing down (param=ADBC), disconnecting 1611287 ********* Interim performance summary ********* 1611287 Total time connected so far = 1593 seconds 1611287 Reception maximum so far: 32 frames/sec, 9220 bytes/sec 1611287 Reception average whilst connected so far: 31 frames/sec, 30 bytes/sec 1611287 Transmission maximum so far: 105 frames/sec, 5388 bytes/sec 1611287 Transmission average whilst connected so far: 44 frames/sec, 1830 bytes/sec 1611287 Max receive buffer = 745, Max send depth = 26, Send frames lost = 0 1611287 **************** Individual client application activity **************** 1611287 Client 8940 requests: 106843 (Ave 67/sec), Data: 28527762 bytes (17908/sec), Average 267 bytes/Process 1611287 Client 9432 requests: 117956 (Ave 74/sec), Data: 30376696 bytes (19068/sec), Average 257 bytes/Process 1611287 Client 6508 requests: 102655 (Ave 64/sec), Data: 64500448 bytes (40489/sec), Average 628 bytes/Process 1611287 Client 2748 requests: 95753 (Ave 60/sec), Data: 59492959 bytes (37346/sec), Average 621 bytes/Process 1611287 Client 6348 requests: 123457 (Ave 77/sec), Data: 33464522 bytes (21007/sec), Average 271 bytes/Process 1611287 Client 6412 requests: 21712 (Ave 13/sec), Data: 3125708 bytes (1962/sec), Average 143 bytes/Process 1611287 Client 9536 requests: 17992 (Ave 11/sec), Data: 1969502 bytes (1236/sec), Average 109 bytes/Process 1611287 Client 6304 requests: 20612 (Ave 12/sec), Data: 2712450 bytes (1702/sec), Average 131 bytes/Process 1611287 Client 7948 requests: 21238 (Ave 13/sec), Data: 845259 bytes (530/sec), Average 39 bytes/Process 1611287 Client 9484 requests: 13289 (Ave 8/sec), Data: 237051 bytes (148/sec), Average 17 bytes/Process 1611287 Client 9972 requests: 55827 (Ave 35/sec), Data: 988620 bytes (620/sec), Average 17 bytes/Process 1611287 Client 4624 requests: 144 (Ave 0/sec), Data: 2621 bytes (1/sec), Average 18 bytes/Process 1611287 *********************************************** 1611397 Received shutdown offset code = ADBC 1623861 Timed out UDP reception: connection assumed lost! 1630226 Trying UDP/IP addr 192.168.0.1, port 8002 ... 1630226 UDP connectionless mode set up okay! 1652862 ****** End of session performance summary ****** 1652862 Total time connected = 1593 seconds 1652862 Reception maximum: 32 frames/sec, 9220 bytes/sec 1652862 Reception average whilst connected: 31 frames/sec, 30 bytes/sec 1652862 Transmission maximum: 105 frames/sec, 5388 bytes/sec 1652862 Transmission average whilst connected: 44 frames/sec, 1830 bytes/sec 1652862 Max receive buffer = 745, Max send depth = 26, Send frames lost = 0 1652862 **************** Individual client application activity **************** 1652862 Client 8940 requests: 106843 (Ave 67/sec), Data: 28527762 bytes (17908/sec), Average 267 bytes/Process 1652862 Client 9432 requests: 117956 (Ave 74/sec), Data: 30376696 bytes (19068/sec), Average 257 bytes/Process 1652862 Client 6508 requests: 102655 (Ave 64/sec), Data: 64500448 bytes (40489/sec), Average 628 bytes/Process 1652862 Client 2748 requests: 95753 (Ave 60/sec), Data: 59492959 bytes (37346/sec), Average 621 bytes/Process 1652862 Client 6348 requests: 123457 (Ave 77/sec), Data: 33464522 bytes (21007/sec), Average 271 bytes/Process 1652862 Client 6412 requests: 21712 (Ave 13/sec), Data: 3125708 bytes (1962/sec), Average 143 bytes/Process 1652862 Client 9536 requests: 17992 (Ave 11/sec), Data: 1969502 bytes (1236/sec), Average 109 bytes/Process 1652862 Client 6304 requests: 20612 (Ave 12/sec), Data: 2712450 bytes (1702/sec), Average 131 bytes/Process 1652862 Client 7948 requests: 21238 (Ave 13/sec), Data: 845259 bytes (530/sec), Average 39 bytes/Process 1652862 Client 9484 requests: 13292 (Ave 8/sec), Data: 237778 bytes (149/sec), Average 17 bytes/Process 1652862 Client 9972 requests: 57171 (Ave 35/sec), Data: 1012420 bytes (635/sec), Average 17 bytes/Process 1652862 Client 4624 requests: 160 (Ave 0/sec), Data: 3025 bytes (1/sec), Average 18 bytes/Process 1652862 ********* Log file closed (Buffers: MaxUsed 33, Alloc 750069 Freed 750049 Refused 0) *********

Pete Okay I'll try UDP with just my basic 3 DUs and InterfaceIT running and then add one program at a time to see what happens. In fact I only started using the JET45 CWP program recently and have been having these network issues even since I went with a server and client PC so maybe the issue does reside elsewhere. The developer of JET45 CWP confirmed that the network usage was ridiculous and he's looking into it. There are many Lear45 users who have the same set up as mine without having any network issues -- in fact some use an old low power PC for their client PC. I think I'll try upping the priority for WideClient. The only issue is that you have to do that every time the process runs. Thanks for working through this with me. Alan

Pete Could you please look at the usages of these programs ( except the JET45 CWP) and let me know if they are reasonable so we can concentrate on the JET45 CWP. Thanks Alan 1709006 Client 2252 requests: 489131 (Ave 338/sec), Data: 97489176 bytes (67513/sec), Average 199 bytes/Process CWP 1709006 Client 4000 requests: 476 (Ave 0/sec), Data: 12430 bytes (8/sec), Average 26 bytes/Process FS INTERROGATE 1709006 Client 1948 requests: 5648 (Ave 3/sec), Data: 286760 bytes (198/sec), Average 50 bytes/Process ADI STANDBY GAUGE 1709006 Client 6268 requests: 22018 (Ave 15/sec), Data: 6387380 bytes (4423/sec), Average 290 bytes/Process PFD 1709006 Client 5752 requests: 23406 (Ave 16/sec), Data: 6275114 bytes (4345/sec), Average 268 bytes/Process EICAS 1709006 Client 4620 requests: 22105 (Ave 15/sec), Data: 13874941 bytes (9608/sec), Average 627 bytes/Process PILOT RADIO MANAGEMENT UNIT 1709006 Client 7480 requests: 21257 (Ave 14/sec), Data: 13424009 bytes (9296/sec), Average 631 bytes/Process FO RADIO MANAGEMENT UNIT 1709006 Client 6228 requests: 21824 (Ave 15/sec), Data: 6035049 bytes (4179/sec), Average 276 bytes/Process MFD 1709006 Client 7024 requests: 4731 (Ave 3/sec), Data: 462224 bytes (320/sec), Average 97 bytes/Process ALTIMETER STANDBY GAUGE 1709006 Client 992 requests: 5063 (Ave 3/sec), Data: 599841 bytes (415/sec), Average 118 bytes/Process ASI STANDBY GAUGE 1709006 Client 6748 requests: 11861 (Ave 8/sec), Data: 211253 bytes (146/sec), Average 17 bytes/Process INTERFACEIT 1709006 Client 1312 requests: 12707 (Ave 8/sec), Data: 1829656 bytes (1267/sec), Average 143 bytes/Process POKEYS RMU INTERFACE

Pete Both my client and server PCs are top of the line home built machines. The server (running FSX) has an ASUS MB, the latest Intel i7 CPU and an nVIDIA GTX670 GPU. The client also has an ASUS MB, an Intel i7 CPU and nVIDIA GTX570 for my DU displays and an NVIDIA 210 for my "instructor station" display. Ethernet is gigabit so it's as fast as is possible over CAT5. I have sent an email to Eric Tomlin of Flight Level Simulations who provides all of the avionics software including the JET45 CWP program. They recommend running JET45 (all but a couple of the programs on the client PC are JET45) on a client machine and suggest a cheap low power PC as the overhead is very low. I'm very surprised at the amount traffic that program is generating as it's only an interface for the Crew Warning Panel and with the engines running there are no warning lights lit up! Thanks Alan

Guys Sorry if I confused everyone. Its tough for a seventy year old chap to keep up with all this stuff. :mad: Ian The client PC and the server PC are on a wired LAN with IP address 192.168.0.1 and 192.168.0.2. The Gigabit LAN adpaters is where I set the addresses for each PC. The WiFi is a completely different adapater and my WiFi router LAN sets those addresses in the format 10.0.0.X. By setting the IPAddr=192.168.0.1 in the client ini file I make sure that its not using the WiFi network to connect -- which it was before (and the mention of 10.0.0.18 is probably where everyone got confused). Pete Everything connects oaky but soon after I start to load up the connection by starting the engines, my connection starts to fail. This is the client ini file and clientlog. Hope I have put everything back to the way it should be. :neutral: Thanks Alan CLIENT INI FILE ; PLEASE SEE WideFS documentation for parameter details ; ===================================================== [Config] Port=8002 Window=0,0,160,38 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=2000,1000 PollInterval=2000 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 ServerIPAddr=192.168.0.1 Protocol=TCP ; ----------------------------------------------- [user] Log=Errors+ ; =============================================== [sounds] Path=C:\Program Files (x86)\WideFS\Sound\ Device1=Primary Sound Driver Device2=Digital Audio (S/PDIF) (High Definition Audio Device) Device3=Digital Audio (S/PDIF) (High Definition Audio Device) CLIENT LOG ********* WideClient Log [version 6.991] Class=FS98MAIN ********* Date (dmy): 05/05/13, Time 11:25:27.250: Client name is AVIONICS 93 LUA: "C:\Program Files (x86)\WideFS\Initial.LUA": not found 93 Attempting to connect now 93 Trying TCP/IP addr 192.168.0.1, port 8002 ... 156 New Client Application: "Jet45_CWP_Driver" (Id=2252) 3822 New Client Application: "FSInterrogate2std" (Id=4000) 21138 Error on client pre-Connection Select() [Error=10060] Connection timed out 21138 Ready to try connection again 22199 Attempting to connect now 23213 Error on client pre-Connection Select() [Error=10061] Connection refused 23213 Ready to try connection again 24242 Attempting to connect now 62665 Trying TCP/IP addr 192.168.0.1, port 8002 ... 188277 Connection made okay! 648434 Received shutdown offset code = ADBC 648434 FS closing down (param=ADBC), disconnecting 648434 ********* Interim performance summary ********* 648434 Total time connected so far = 458 seconds 648434 Reception maximum so far: 32 frames/sec, 1061 bytes/sec 648434 Reception average whilst connected so far: 31 frames/sec, 997 bytes/sec 648434 Transmission maximum so far: 286 frames/sec, 18858 bytes/sec 648434 Transmission average whilst connected so far: 277 frames/sec, 8919 bytes/sec 648434 Max receive buffer = 483, Max send depth = 20, Send frames lost = 0 648434 **************** Individual client application activity **************** 648434 Client 2252 requests: 192040 (Ave 419/sec), Data: 38170167 bytes (83340/sec), Average 198 bytes/Process 648434 Client 4000 requests: 258 (Ave 0/sec), Data: 8303 bytes (18/sec), Average 32 bytes/Process 648434 *********************************************** 648543 Received shutdown offset code = ADBC 656187 Connection closed by server! 656187 Attempting to connect now 656187 Trying TCP/IP addr 192.168.0.1, port 8002 ... 677231 Error on client pre-Connection Select() [Error=10060] Connection timed out 677231 Ready to try connection again 678245 Attempting to connect now 722425 Trying TCP/IP addr 192.168.0.1, port 8002 ... 722425 Connection made okay! 722550 Connection closed by server! 722565 Attempting to connect now 722565 Connection made okay! 1130087 New Client Application: "LJ45_ASI" (Id=1948) 1132864 New Client Application: "Jet45_PFD" (Id=6268) 1134455 New Client Application: "Jet45_MFD DU2" (Id=5752) 1136498 New Client Application: "Jet45_RMU PILOT" (Id=4620) 1138012 New Client Application: "Jet45_RMU FO" (Id=7480) 1139057 New Client Application: "Jet45_MFD DU3" (Id=6228) 1148682 New Client Application: "LJ45_ADI" (Id=7024) 1149790 New Client Application: "lj45_Altimeter" (Id=992) 1153159 New Client Application: "interfaceIT" (Id=6748) 1169290 WARNING! Send() request depth is over 100! 1286228 New Client Application: "PokeysRMUNoGear" (Id=1312) 1709006 Received shutdown offset code = ADBC 1709006 FS closing down (param=ADBC), disconnecting 1709006 ********* Interim performance summary ********* 1709006 Total time connected so far = 1444 seconds 1709006 Reception maximum so far: 32 frames/sec, 9148 bytes/sec 1709006 Reception average whilst connected so far: 31 frames/sec, 2531 bytes/sec 1709006 Transmission maximum so far: 352 frames/sec, 22059 bytes/sec 1709006 Transmission average whilst connected so far: 235 frames/sec, 390 bytes/sec 1709006 Max receive buffer = 840, Max send depth = 203, Send frames lost = 1 1709006 **************** Individual client application activity **************** 1709006 Client 2252 requests: 489131 (Ave 338/sec), Data: 97489176 bytes (67513/sec), Average 199 bytes/Process 1709006 Client 4000 requests: 476 (Ave 0/sec), Data: 12430 bytes (8/sec), Average 26 bytes/Process 1709006 Client 1948 requests: 5648 (Ave 3/sec), Data: 286760 bytes (198/sec), Average 50 bytes/Process 1709006 Client 6268 requests: 22018 (Ave 15/sec), Data: 6387380 bytes (4423/sec), Average 290 bytes/Process 1709006 Client 5752 requests: 23406 (Ave 16/sec), Data: 6275114 bytes (4345/sec), Average 268 bytes/Process 1709006 Client 4620 requests: 22105 (Ave 15/sec), Data: 13874941 bytes (9608/sec), Average 627 bytes/Process 1709006 Client 7480 requests: 21257 (Ave 14/sec), Data: 13424009 bytes (9296/sec), Average 631 bytes/Process 1709006 Client 6228 requests: 21824 (Ave 15/sec), Data: 6035049 bytes (4179/sec), Average 276 bytes/Process 1709006 Client 7024 requests: 4731 (Ave 3/sec), Data: 462224 bytes (320/sec), Average 97 bytes/Process 1709006 Client 992 requests: 5063 (Ave 3/sec), Data: 599841 bytes (415/sec), Average 118 bytes/Process 1709006 Client 6748 requests: 11861 (Ave 8/sec), Data: 211253 bytes (146/sec), Average 17 bytes/Process 1709006 Client 1312 requests: 12707 (Ave 8/sec), Data: 1829656 bytes (1267/sec), Average 143 bytes/Process 1709006 *********************************************** 1709116 Received shutdown offset code = ADBC 1716775 Connection closed by server! 1716775 Attempting to connect now 1716775 Trying TCP/IP addr 192.168.0.1, port 8002 ... 1782998 Connection made okay! 1793965 New Client Application: "lj45_Altimeter" (Id=6200) 1803356 New Client Application: "Jet45_MFD DU2" (Id=7284) 1804791 New Client Application: "Jet45_PFD" (Id=3936) 1807958 New Client Application: "interfaceIT" (Id=7064) 1835586 ERROR!! Send() request depth is over 250! Queue flushed! 1835617 WARNING! Send() request depth is over 100! 1835664 ERROR!! Send() request depth is over 250! Queue flushed! 1835695 WARNING! Send() request depth is over 100! 1835773 ERROR!! Send() request depth is over 250! Queue flushed! 1835820 WARNING! Send() request depth is over 100! 1835851 ERROR!! Send() request depth is over 250! Queue flushed! 1835882 WARNING! Send() request depth is over 100! 1835960 ERROR!! Send() request depth is over 250! Queue flushed! 1836007 WARNING! Send() request depth is over 100! 1836038 ERROR!! Send() request depth is over 250! Queue flushed! 1836085 WARNING! Send() request depth is over 100! 1838175 ERROR!! Send() request depth is over 250! Queue flushed! 1838206 WARNING! Send() request depth is over 100! 1838284 ERROR!! Send() request depth is over 250! Queue flushed! 1838300 WARNING! Send() request depth is over 100! 1838362 ERROR!! Send() request depth is over 250! Queue flushed! 1838362 WARNING! Send() request depth is over 100! 1838487 ERROR!! Send() request depth is over 250! Queue flushed! 1838487 WARNING! Send() request depth is over 100! 1838550 ERROR!! Send() request depth is over 250! Queue flushed! 1838550 WARNING! Send() request depth is over 100! SERVER INI FILE ; PLEASE SEE the documentation for parameter details ; ================================================== [Config] Port=8002 ; ----------------------------------------------- [user] Log=Errors+ ; =============================================== SERVER LOG ********* WideServer.DLL Log [version 7.88] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 05/05/13, Time 11:54:50.009: Server name is FSX 16053 Initialising TCP/IP server 16053 Initialising UDP/IP server 16115 Broadcasting service every 1000 mSecs 20359 Incoming connection Accepted ok (skt=8244) TCP 20437 Connected to computer "AVIONICS" running WideClient version 6.991 (skt=8244) TCP

Pete I think you misunderstood what I said. Originally WideFS was using my WiFi network because in one of the client logs I saw the IP Address 10.0.0.18 which is my WiFi network. To stop that from happening (and according to your user guide) I set IPAddr=192.168.0.1 and Protocol=TCP (the IP Address I assigned to my server PC) in the WideClient.ini file. SO they were never on the same network one is WiFi and the other is a wired LAN through a switch that connects the server and client PCs. I found out why I could not get a connection. When you told me that I probably had a bad network adapter or adapter driver, I switched the cable on the server to a second adapter on my MB. However I forgot to change the IP address of the new adapter. :oops: I just fixed that and now have a connection. Next step is to remove these lines in the WideFS.ini file as you told me :oops: and see if my network losses have gone. ServerIPAddr=192.168.0.1 Protocol=TCP Thanks Alan

Is there an offset that says ground power is available. Thanks Alan

I added the server address because it was originally connecting over WiFi (IP Address 10.0.0.18). I originally set the server on my wired LAN to 192.168.0.1 Please see comment above . Sorry, my bad. Went back and added Protocol=TCP to the server and client ini files but still not connected. Client log says Trying to locate server: Protocol not yet decided. Do you have any idea what those other error messages mean (e.g. 1456426 ERROR!! Send() request depth is over 250! Queue flushed!) Thanks Alan

Pete Using the second port made no diiference. I shut everything down and restarted FSX and WideClient but now I cannot establish a connection (server say Waiting for clients). I pinged the server from the client and that ws good. Here are the two ini files to see if you can see a problem. Thanks Alan ; PLEASE SEE the documentation for parameter details ; ================================================== [Config] Port=8002 ServerIPAddr=192.168.0.1 ; ----------------------------------------------- [user] Log=Errors+ ; =============================================== ; PLEASE SEE WideFS documentation for parameter details ; ===================================================== [Config] Port=8002 Window=43,44,886,589 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=2000,1000 PollInterval=2000 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 serverIPAddr=192.168.0.1 ; ----------------------------------------------- [user] Log=Errors+ ; =============================================== [sounds] Path=E:\Program Files (x86)\FSUIPC\WideFS\Sound\ Device1=Primary Sound Driver Pete Using the second port made no diiference. I shut everything down and restarted FSX and WideClient but now I cannot establish a connection (server say Waiting for clients). I pinged the server from the client and that ws good. Here are the two ini files that you asked for to see if you can see a problem. I have no idea what those entries mean. Thanks Alan Server ; PLEASE SEE the documentation for parameter details ; ================================================== [Config] Port=8002 ServerIPAddr=192.168.0.1 ; ----------------------------------------------- [user] Log=Errors+ ; =============================================== Client ; PLEASE SEE WideFS documentation for parameter details ; ===================================================== [Config] Port=8002 Window=43,44,886,589 Visible=Yes ButtonScanInterval=20 ClassInstance=0 NetworkTiming=5,1 MailslotTiming=2000,1000 PollInterval=2000 Port2=9002 ResponseTime=18 ApplicationDelay=0 TCPcoalesce=No WaitForNewData=500 MaxSendQ=100 OnMaxSendQ=Log NewSendScanTime=50 Priority=3,1,2 serverIPAddr=192.168.0.1 ; ----------------------------------------------- [user] Log=Errors+ ; =============================================== [sounds] Path=E:\Program Files (x86)\FSUIPC\WideFS\Sound\ Device1=Primary Sound Driver

Pete Thanks for interpreting that gobbledegook for me. :razz: Fortunately my motherboard has two LAN adapters so I'll try the other one. One question, I have a WideClient.ini on my client PC and a WideClient.ini on my server PC. It was the server PC WideClient.ini that I posted -- my client PC WideClient.ini had no error messages. Could you please explain that. Thanks Alan

It was running TCP so was wondering what the last section meant. Thanks Alan 67221 Connected to computer "AVIONICS" running WideClient version 6.991 (skt=7348) TCP 558874 **** ERROR! Sumcheck or length fails on received block (skt=7348), len=948 (time=29) 921514 Auto send stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP After changing to UDP protocol, I still lost communication and this is the latest WideServer log. Thanks Alan ********* WideServer.DLL Log [version 7.88] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 04/05/13, Time 13:40:43.414: Server name is FSX 15943 Initialising TCP/IP server 15943 Initialising UDP/IP server 16099 Broadcasting service every 1000 mSecs 19344 Incoming connection Accepted ok (skt=8240) TCP 19469 Connected to computer "AVIONICS" running WideClient version 6.991 (skt=8240) TCP 2657477 **** ERROR! Sumcheck or length fails on received block (skt=8240), len=20781 (time=2) 2657961 Auto send stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP

Pete Okay let me try that as I added the ServerIPAddr=192.168.0.1 to my WideClient.ini file and it appears that the connection was made over the LAN. However I still had a loss of communications. Here is the new ini file. Thanks Alan ********* WideServer.DLL Log [version 7.88] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 04/05/13, Time 13:17:04.105: Server name is FSX 15959 Initialising TCP/IP server 15959 Initialising UDP/IP server 16100 Broadcasting service every 1000 mSecs 49858 Incoming connection Accepted ok (skt=4212) TCP 49905 Restarting service due to zero reception! 54101 Incoming connection Accepted ok (skt=6964) TCP 58345 Incoming connection Accepted ok (skt=7348) TCP 62588 Incoming connection Accepted ok (skt=4444) TCP 67065 Incoming connection Accepted ok (skt=7348) TCP 67221 Connected to computer "AVIONICS" running WideClient version 6.991 (skt=7348) TCP 558874 **** ERROR! Sumcheck or length fails on received block (skt=7348), len=948 (time=29) 921514 Auto send stopped before sending all data (0 of 47 sent), Error=10013 (IP=255.255.255.255) UDP

I keep losing connection between my Server computer running FSX and my client computer running my avionics. Can someone please look at the logs and let me know where the problem lies so I can fix it. I just noticed the IP Address and it to connects over my WiFi network and not my LAN. Let me troubleshoot this first. Thanks Alan WideServer log ********* WideServer.DLL Log [version 7.88] ********* Blocksize guide = 8192 (double allowed) Date (dmy): 04/05/13, Time 11:52:30.947: Server name is FSX 15897 Initialising TCP/IP server 15897 Initialising UDP/IP server 16115 Broadcasting service every 1000 mSecs 28626 Incoming connection Accepted ok (skt=7336) TCP 28626 Restarting service due to zero reception! 32870 Incoming connection Accepted ok (skt=4204) TCP 37113 Incoming connection Accepted ok (skt=3720) TCP 41356 Incoming connection Accepted ok (skt=7336) TCP 86706 Incoming connection Accepted ok (skt=4600) TCP 86799 Connected to computer "AVIONICS" running WideClient version 6.991 (skt=4600) TCP 1545081 **** ERROR! Sumcheck or length fails on received block (skt=4600), len=351 (time=0) 1548950 Send ok but needed 5 attempts! (496 of 496 sent) (skt=4600) TCP 2257257 Send ok but needed 6 attempts! (564 of 564 sent) (skt=4600) TCP ClientServer Log ********* WideClient Log [version 6.991] Class=FS98MAIN ********* Date (dmy): 04/05/13, Time 11:53:37.560: Client name is AVIONICS 94 LUA: "C:\Program Files (x86)\WideFS\Initial.LUA": not found 156 Attempting to connect now 156 Trying to locate server: Need details from Server Broadcast 156 Failed to connect: waiting to try again 2216 Attempting to connect now 4275 Server = FSX 4368 Trying TCP/IP host "FSX" port 8002 ... 4368 ... Okay, IP Address = 10.0.0.18 4665 Connection made okay! 9969 New Client Application: "LJ45_ASI" (Id=4264) 14321 New Client Application: "lj45_Altimeter" (Id=4752) 16178 New Client Application: "LJ45_ADI" (Id=3700) 22901 New Client Application: "Jet45_MFD DU3" (Id=2276) 26739 New Client Application: "Jet45_RMU FO" (Id=4500) 28673 New Client Application: "Jet45_RMU PILOT" (Id=5088) 30265 New Client Application: "Jet45_MFD DU2" (Id=2896) 32215 New Client Application: "Jet45_PFD" (Id=4756) 37020 New Client Application: "interfaceIT" (Id=4252) 133678 New Client Application: "PokeysRMUNoGear" (Id=4956) 1371936 New Client Application: "Jet45_CWP_Driver" (Id=2252) 1453821 WARNING! Send() request depth is over 100! 1456426 ERROR!! Send() request depth is over 250! Queue flushed! 1460357 WARNING! Send() request depth is over 100! 1471012 New Client Application: "FSInterrogate2std" (Id=4000)

Thanks Pete, works fine. Alan

Pete I think you are right -- I don't know what I am doing. :???: I deleted all the joystick calibrations and axes because I was having issues with setting up my TQ. I'm not bothered about losing those setting as all I had programmed was the flaps, reversers, and engine shut off. The whole issue of Profiles came from the days before I started building a Lear45 and yes, as I will only ever fly a Lear, then I don't need them. The INI file I below is the last one before my latest screw up (it's the one where I had LEARJET45 instead of LEAR45). Thanks for fixing this for me. Alan [General] UpdatedByVersion=4880 History=G6H2CO1TR9UX5U0REPI3X TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=3 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=Yes RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=Yes ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=Yes ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes MouseWheelMove=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes EnableMouseLook=No AxesWrongRange=No InitDelay=0 InitDelayDevicesToo=No OOMcheck=Yes LogExtras=x4 LogButtonsKeys=Yes LogLua=Yes PollInterval=15 UseMidMouseBtn=Yes LogWeather=Yes FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0 SimConnectUsed=10.0.61259.0 LogWrites=Yes LogReads=Yes LogEvents=Yes [JoyNames] AutoAssignLetters=Yes A=BU0836 Interface B=Virtual Joystick 0=BU0836 Interface 0.GUID={486EF670-8BD6-11E2-8001-444553540000} 1=Virtual Joystick 1.GUID={7BA4DE70-8BDA-11E2-8002-444553540000} A.GUID={486EF670-8BD6-11E2-8001-444553540000} B.GUID={7BA4DE70-8BDA-11E2-8002-444553540000} [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [sounds] Path=E:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\ Device1=Primary Sound Driver Device2=SAMSUNG-1 (NVIDIA High Definition Audio) Device3=Digital Audio (S/PDIF) (High Definition Audio Device) Device4=Digital Audio (S/PDIF) (High Definition Audio Device) [AutoSave] AutoSaveEnabled=No Next=1 Interval=60 Files=10 SaveOnGround=No [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [Programs] [ClientNames] 1=AVIONICS [Monitor] Display=1 [Profile.LEARJET45] 1=Learjet 45 [JoystickCalibration.LEARJET45] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=Yes ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16068,-512,512,16096 SlopeAileron=-7 Elevator=-16209,-512,512,16131 SlopeElevator=-6 Rudder=-13926,-492,512,16274 LeftBrake=-16384,16383 RightBrake=-16384,15798 !1=T PropPitch=-16380,16380 Throttle1=-16182,-104,-104,22/56 Throttle2=16383,16383,16383,16384/40 SlopeThrottle1=12 FlapStarts=-16384,-2461,9451,15968 FlapEnds=-15968,2923,12663,16384 Flaps=0,16380 Spoilers=3674,3674,10823,16185 Reverser=-16380,16380 SlopeThrottle2=7 [Axes.LEARJET45] 0=AX,256,D,3,0,0,0 1=AU,256,D,7,0,0,0 2=AV,256,D,8,0,0,0 3=BX,256,D,9,0,0,0 4=BY,256,D,10,0,0,0 5=BU,256,D,22,0,0,0 6=BV,256,D,23,0,0,0 [buttons.LEAR45] 0=P1001,0,Cx0D0073F8,x01 2=P1001,5,Cx050073F8,x20 4=P1001,1,Cx050073F8,x02 5=P1001,14,C66040,16211 6=U1001,1,Cx090073F8,x02 7=U1001,0,Cx090073F8,x01 8=P1001,2,Cx050073F8,x04 9=U1001,2,Cx090073F8,x04 10=P1001,3,Cx050073F8,x08 11=U1001,3,Cx090073F8,x08 12=P1001,4,Cx050073F8,x10 13=U1001,4,Cx090073F8,x10 14=U1001,5,Cx090073F8,x20 15=P1001,13,Cx050073D5,x40 18=U1001,13,Cx090073D5,x40 19=P1001,7,Cx050073F9,x01 20=U1001,7,Cx090073F9,x01 21=P1001,8,Cx050073F9,x02 22=U1001,8,Cx090073F9,x02 23=P1001,9,Cx050073F9,x04 24=U1001,9,Cx090073F9,x04 25=P1001,10,Cx050073F9,x08 26=U1001,10,Cx090073F9,x08 27=P1001,11,Cx050073F9,x10 28=U1001,11,Cx09000049,x10 29=P1001,12,Cx050073F9,x20 30=U1001,12,Cx090073F9,x20 31=R1001,19,Cx110073FD,x00FF0001 32=R1001,18,Cx210073FD,x00FF0001 33=R1001,23,Cx110073FC,x00FF0001 34=R1001,22,Cx210073FC,x00FF0001 35=R1001,21,Cx210073D2,x00FF0001 36=R1001,20,Cx110073D2,x00FF0001 37=R1001,25,Cx110073D7,x00FF0001 38=R1001,24,Cx210073D7,x00FF0001 39=R1001,27,Cx210073D8,x00FF0001 40=R1001,26,Cx11000049,x00FF0001 41=R1001,29,C65883,10 42=R1001,28,C65884,10 [MacroFiles] 1=iFly737 2=leveld767 [buttons] Buttonrepeat=20,10 [LuaFiles] 1=ipcReady

Agghhh if I had any hair it would be gone by now as my woes continue. After shutting down FSX to go to lunch none of the buttons are working. Even in the Buttons + Switches window with the Profile Specific box checked and the correct profile shown at the top of the screen (LEAR45) there is no reaction to a button press. What has happened here? I've attached the current INI file contents. Thanks Alan [General] UpdatedByVersion=4880 History=SKXMV2F9BNYNALG8V6ZKQ TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=No BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=3 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=Yes RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=Yes ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=Yes ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes MouseWheelMove=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes EnableMouseLook=No AxesWrongRange=No InitDelay=0 InitDelayDevicesToo=No OOMcheck=Yes LogExtras=x204 PollInterval=15 UseMidMouseBtn=Yes LogAxes=Yes LogReads=Yes LogWeather=Yes LogEvents=Yes FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0 SimConnectUsed=10.0.61259.0 LogButtonsKeys=Yes [JoyNames] AutoAssignLetters=Yes A=BU0836 Interface B=Virtual Joystick 0=Virtual Joystick 0.GUID={7BA4DE70-8BDA-11E2-8002-444553540000} 1=BU0836 Interface 1.GUID={486EF670-8BD6-11E2-8001-444553540000} A.GUID={486EF670-8BD6-11E2-8001-444553540000} B.GUID={7BA4DE70-8BDA-11E2-8002-444553540000} [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [sounds] Path=E:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\ Device1=Primary Sound Driver Device2=SAMSUNG-1 (NVIDIA High Definition Audio) Device3=Digital Audio (S/PDIF) (High Definition Audio Device) Device4=Digital Audio (S/PDIF) (High Definition Audio Device) [AutoSave] AutoSaveEnabled=No Next=1 Interval=60 Files=10 SaveOnGround=No [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [Programs] [ClientNames] 1=AVIONICS [Monitor] Display=1 [Profile.LEAR45] 1=Learjet 45 [buttons.LEAR45] Buttonrepeat=20,10 0=PB,4,Cx02000BC8,x0000 1=UB,4,Cx02000BC8,x7FFF 0=P1001,0,Cx0D0073F8,x01 2=P1001,5,Cx050073F8,x20 4=P1001,1,Cx050073F8,x02 5=P1001,14,C66040,16211 6=U1001,1,Cx090073F8,x02 7=U1001,0,Cx090073F8,x01 8=P1001,2,Cx050073F8,x04 9=U1001,2,Cx090073F8,x04 10=P1001,3,Cx050073F8,x08 11=U1001,3,Cx090073F8,x08 12=P1001,4,Cx050073F8,x10 13=U1001,4,Cx090073F8,x10 14=U1001,5,Cx090073F8,x20 15=P1001,13,Cx050073D5,x40 18=U1001,13,Cx090073D5,x40 21=P1001,8,Cx050073F9,x02 22=U1001,8,Cx090073F9,x02 23=P1001,9,Cx050073F9,x04 24=U1001,9,Cx090073F9,x04 25=P1001,10,Cx050073F9,x08 26=U1001,10,Cx090073F9,x08 27=P1001,11,Cx050073F9,x10 28=U1001,11,Cx09000049,x10 29=P1001,12,Cx050073F9,x20 30=U1001,12,Cx090073F9,x20 31=R1001,19,Cx110073FD,x00FF0001 32=R1001,18,Cx210073FD,x00FF0001 33=R1001,23,Cx110073FC,x00FF0001 34=R1001,22,Cx210073FC,x00FF0001 35=R1001,21,Cx210073D2,x00FF0001 36=R1001,20,Cx110073D2,x00FF0001 37=R1001,25,Cx110073D7,x00FF0001 38=R1001,24,Cx210073D7,x00FF0001 39=R1001,27,Cx210073D8,x00FF0001 40=R1001,26,Cx11000049,x00FF0001 41=R1001,29,C65883,10 42=R1001,28,C65884,10 43=P1001,7,Cx050073F9,x01 44=U1001,7,Cx090073F9,x01 45=P1001,0,Cx050073F8,x01 46=PB,2,C65983,0 47=UB,2,C65987,0 48=PB,3,C65988,0 49=UB,3,C65992,0 50=PB,5,C65820,0 51=UB,5,C65820,-4096 52=PB,6,C65821,0 53=UB,6,C65821,-4096 [MacroFiles] 1=iFly737 2=leveld767 [LuaFiles] 1=ipcReady 2=linda [window.LUA display] Docked=7351, 2856, 3509, 2446 [Axes.LEAR45] 0=BS,R0,D,23,0,0,0 [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=Yes ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 [buttons] Buttonrepeat=20,10

Pete I exited FSX and copied the settings in the old INI file across to the new INI file again and they work fine. I was trying to do all the work while FSX was running which is why I couldn't get rid of the old LEARJET45 Profile. Thanks Alan

Pete My default start up in FSX is the LEAR45 cold and dark at KGSO. It has worked before but this is the first time I restarted this new PC with the modified INI file. I'll change that entry and see if that fixes it. Thanks Alan Pete I'm at a loss as to what has happened. My default is the FSX Lear45 and always has been and that loads every time I start FSX. Is there something I need to change in the INI file to load LEAR45? I did change the entry to ShortAircraftNameOk=Substring closed and restarted FSX but no luck. Thanks Alan

Pete I used all of the reconfigured buttons that you kindly did for me and they worked just fine. However, I had to restart my FSX computer due to some Windows updates and now none of them work anymore. If I click on a button it correctly identifies the joystick as 1001 and the button number but all of the programming is gone. I've attached my INI file for you to peruse to see if you can spot the problem. Thanks Alan [General] UpdatedByVersion=4880 History=G6H2CO1TR9UX5U0REPI3X TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No GetNearestAirports=Yes WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=1 LuaRerunDelay=66 Console=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=3 MinIce=-1 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=Yes RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=Yes ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=Yes ZapSound=firework ShortAircraftNameOk=No UseProfiles=Yes MouseWheelMove=No DeleteVehiclesForAES=Yes AutoScanDevices=Yes EnableMouseLook=No AxesWrongRange=No InitDelay=0 InitDelayDevicesToo=No OOMcheck=Yes LogExtras=x4 LogButtonsKeys=Yes LogLua=Yes PollInterval=15 UseMidMouseBtn=Yes LogWeather=Yes FSVersionUsed="Microsoft Flight Simulator X",10.0.61472.0 SimConnectUsed=10.0.61259.0 LogWrites=Yes LogReads=Yes LogEvents=Yes [JoyNames] AutoAssignLetters=Yes A=BU0836 Interface B=Virtual Joystick 0=BU0836 Interface 0.GUID={486EF670-8BD6-11E2-8001-444553540000} 1=Virtual Joystick 1.GUID={7BA4DE70-8BDA-11E2-8002-444553540000} A.GUID={486EF670-8BD6-11E2-8001-444553540000} B.GUID={7BA4DE70-8BDA-11E2-8002-444553540000} [WideServer] WideFSenabled=Yes AdvertiseService=1 Port=8002 Port2=9002 [sounds] Path=E:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Sound\ Device1=Primary Sound Driver Device2=SAMSUNG-1 (NVIDIA High Definition Audio) Device3=Digital Audio (S/PDIF) (High Definition Audio Device) Device4=Digital Audio (S/PDIF) (High Definition Audio Device) [AutoSave] AutoSaveEnabled=No Next=1 Interval=60 Files=10 SaveOnGround=No [GPSout] GPSoutEnabled=No Port=COM0 Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [GPSout2] GPSoutEnabled=No Port=<none set> Speed=4800 Interval=2000 PosTo6Decimal=No Sentences= [Programs] [ClientNames] 1=AVIONICS [Monitor] Display=1 [Profile.LEARJET45] 1=Learjet 45 [JoystickCalibration.LEARJET45] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=Yes ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=Yes ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 SteeringTillerControl=0 MaxSteerSpeed=60 Aileron=-16068,-512,512,16096 SlopeAileron=-7 Elevator=-16209,-512,512,16131 SlopeElevator=-6 Rudder=-13926,-492,512,16274 LeftBrake=-16384,16383 RightBrake=-16384,15798 !1=T PropPitch=-16380,16380 Throttle1=-16182,-104,-104,22/56 Throttle2=16383,16383,16383,16384/40 SlopeThrottle1=12 FlapStarts=-16384,-2461,9451,15968 FlapEnds=-15968,2923,12663,16384 Flaps=0,16380 Spoilers=3674,3674,10823,16185 Reverser=-16380,16380 SlopeThrottle2=7 [Axes.LEARJET45] 0=AX,256,D,3,0,0,0 1=AU,256,D,7,0,0,0 2=AV,256,D,8,0,0,0 3=BX,256,D,9,0,0,0 4=BY,256,D,10,0,0,0 5=BU,256,D,22,0,0,0 6=BV,256,D,23,0,0,0 [buttons.LEAR45] 0=P1001,0,Cx0D0073F8,x01 2=P1001,5,Cx050073F8,x20 4=P1001,1,Cx050073F8,x02 5=P1001,14,C66040,16211 6=U1001,1,Cx090073F8,x02 7=U1001,0,Cx090073F8,x01 8=P1001,2,Cx050073F8,x04 9=U1001,2,Cx090073F8,x04 10=P1001,3,Cx050073F8,x08 11=U1001,3,Cx090073F8,x08 12=P1001,4,Cx050073F8,x10 13=U1001,4,Cx090073F8,x10 14=U1001,5,Cx090073F8,x20 15=P1001,13,Cx050073D5,x40 18=U1001,13,Cx090073D5,x40 19=P1001,7,Cx050073F9,x01 20=U1001,7,Cx090073F9,x01 21=P1001,8,Cx050073F9,x02 22=U1001,8,Cx090073F9,x02 23=P1001,9,Cx050073F9,x04 24=U1001,9,Cx090073F9,x04 25=P1001,10,Cx050073F9,x08 26=U1001,10,Cx090073F9,x08 27=P1001,11,Cx050073F9,x10 28=U1001,11,Cx09000049,x10 29=P1001,12,Cx050073F9,x20 30=U1001,12,Cx090073F9,x20 31=R1001,19,Cx110073FD,x00FF0001 32=R1001,18,Cx210073FD,x00FF0001 33=R1001,23,Cx110073FC,x00FF0001 34=R1001,22,Cx210073FC,x00FF0001 35=R1001,21,Cx210073D2,x00FF0001 36=R1001,20,Cx110073D2,x00FF0001 37=R1001,25,Cx110073D7,x00FF0001 38=R1001,24,Cx210073D7,x00FF0001 39=R1001,27,Cx210073D8,x00FF0001 40=R1001,26,Cx11000049,x00FF0001 41=R1001,29,C65883,10 42=R1001,28,C65884,10 [Profile.LEAR45] Buttonrepeat=20,10 1=LEAR45 [MacroFiles] 1=iFly737 2=leveld767 [buttons] Buttonrepeat=20,10 [LuaFiles] 1=ipcReady [buttons.LEARJET45] 0=PB,4,Cx02000BC8,x0000 1=UB,4,Cx02000BC8,x7FFF

Pete Sorry about that, I didn't think that you needed them identified by joystick number. I can change the 1001 to 1002 if I can determine which of these entries are for each. If I get stuck on that I'll let you know. Yes there should only be LEAR45 so I'll merge those and make sure the entry numbers are consecutive. Thanks Alan I checked and all of the first set of buttons is for joystick 1001. I merged the second set with entries 43-50. Thanks Alan

Pete I ran out of ports on the FS PC. I've attached both INI files -- one is titled OLD and one NEW. The old one is where I programmed the buttons. BTW there are some entries under [buttons.LEAR45] in the new INI and they need to stay. If you need the Joystick entries from both ini files I posted them earlier. Thanks Alan Edit It won't let me upload a TXT file so here are the relevant Buttons section from both ini files. OLD INI (I need these buttons in the FSX FSUIPC ini file) [buttons.LEAR45] 0=PB,0,Cx0D0073F8,x01 2=PB,5,Cx050073F8,x20 4=PB,1,Cx050073F8,x02 5=PB,14,C66040,16211 6=UB,1,Cx090073F8,x02 7=UB,0,Cx090073F8,x01 8=PB,2,Cx050073F8,x04 9=UB,2,Cx090073F8,x04 10=PB,3,Cx050073F8,x08 11=UB,3,Cx090073F8,x08 12=PB,4,Cx050073F8,x10 13=UB,4,Cx090073F8,x10 14=UB,5,Cx090073F8,x20 15=PB,13,Cx050073D5,x40 18=UB,13,Cx090073D5,x40 19=PB,7,Cx050073F9,x01 20=UB,7,Cx090073F9,x01 21=PB,8,Cx050073F9,x02 22=UB,8,Cx090073F9,x02 23=PB,9,Cx050073F9,x04 24=UB,9,Cx090073F9,x04 25=PB,10,Cx050073F9,x08 26=UB,10,Cx090073F9,x08 27=PB,11,Cx050073F9,x10 28=UB,11,Cx09000049,x10 29=PB,12,Cx050073F9,x20 30=UB,12,Cx090073F9,x20 31=RB,19,Cx110073FD,x00FF0001 32=RB,18,Cx210073FD,x00FF0001 33=RB,23,Cx110073FC,x00FF0001 34=RB,22,Cx210073FC,x00FF0001 35=RB,21,Cx210073D2,x00FF0001 36=RB,20,Cx110073D2,x00FF0001 37=RB,25,Cx110073D7,x00FF0001 38=RB,24,Cx210073D7,x00FF0001 39=RB,27,Cx210073D8,x00FF0001 40=RB,26,Cx11000049,x00FF0001 41=RB,29,C65883,10 42=RB,28,C65884,10 NEW INI (these buttons need to stay) [buttons.LEARJET45] 0=PB,0,C3,0 1=PB,1,C65552,0 4=RB,2,C65604,0 5=PB,3,C65972,0 6=RB,5,C66635,0 10=PB,4,C65588,0 16=UB,4,C65752,0 17=UB,5,C65967,0