scoobflight

the firewall is likely blocking MAP from 'talking' with the client and/or the client from 'talking' with the host and/or both. you need to look at MAP's manual about the ports used to 'talk' and review your computers' and router's firewall control systems.

usual issue is your firewall on one of, or both, computers. after that the issue is the firewall on your router.

the point of the game, FSPassengers, is you build experience and then can fly larger planes. fly more and gain the necessary experience. in there real world there are reasons and 'so close' don't cut it. or don't 'play' FSPassengers and just fly the Ejet.

see - http://forum.avsim.net/topic/469081-fms-messages-in-the-feelthere-erj-v2/?hl=%2Bfeelthere#entry3243194 http://forum.avsim.net/topic/469082-fms-alert-messages-erj-feelthere-if-that-matters-check-alt-constraint/?hl=%2Bfeelthere#entry3243167

don't think FMS's can do this ... the arc is displayed so you can hand fly the plane.

the 777 and 380 are not feelThere products. contact wilco for the 777 (assuming your have wilco' plane) and wilco for the 380. contact Navigraph concerning problems with their installer.

multiplayer TOWER 2011 and TRACON were designed from the start to work together. specifics are outlined in the TRACON manual.

and the plane being flown is ... ??? :???:

feelThere only provides fully updated installers ... now 'after install now install and then install and then ...'.

likely your yoke wasnt' centered. or the plane wasn't trimmed correctly

why are you turning off the yaw dampener?

'79': see - http://forum.simflight.com/topic/78251-embraer-erj-145-asel-knob-not-working/?hl=hud#entry474341

great!

two things (if i have it right) have changed on your system - * new GPU * steam edition v. the DVD installed version of FSX. as you didn't have the issue before i would first work on the GPU. as noted before the ERJ wasn't designed for 'steam'. some folks can't even get the gauges to show. a steam edition will be looked at after other projects are completed.

so it may be your GPU driver isn't correctly installed. or it is an issue related to the 'steam' edition.

please review the post linked below are add required information - http://forum.simflight.com/topic/76182-reporting-a-problem-checklist/

your computer is unable to keep up with FS's graphics needs. by reducing the gauge refresh rates you reduce the demands on the computer's CPU. also ... the ERJv2 isn't designed to work on 'steam' as this version of FS didn't exist when the plane was developed. also, it seems, that steam isn't following the SDK as released for FSX.

use the configuration utility to adjust the plane's gauge refresh rates and/or reduce the setting of the visuals in FS. and the ERJv2 wasn't made to work with the 'steam' addition - http://forum.simflight.com/topic/78392-embraer-erj-135145-series-steam-edition-notice/?hl=steam

actually ... Peidmont still exists and flies with planes painted as US Airways and American Eagle - http://piedmont-airlines.com somewhat simplified a plane files under the registration of the owner regardless of the logo painted on the exterior.

Matthijus: rarely is a chart update going to be all that different. sometimes the update is formatting. i recommend you use the updated chart and see if it works with the older route programmed into TRACON.

Stanner: as you are deleting the FMGC file you need to contact navigraph about their installer. by default it should put the AIRAC in the correct location. next, check to make sure your antivirus program isn't stopping the install ... or even deleting the file after it is installed (been seeing reports that MSsecruityessentials is doing this to some programs/files). the AIRAC is in a general folder, as you noted FS9\Feelthere\ND, so ALL feelThere and Wilco aircraft can read the same database. NOTE: if you installed another Wilco or feelThere aircraft after updating the AIRAC file you must re-update the AIRAC file.

Stanner: what do you mean by 'unable to successfully install'?

the plane wasn't designed to work with p3d.

have you used the ejet configuration tool?

Johan: the type of 'video card' you have in your computer isn't really a video card. it is part of the CPU and cannot deal with intensive games graphics. your computer's motherboard may have an expansion slot that may take a video card. your computer could also do better if you added memory (again, if the motherboard has expansion slots).