alaxus

DINPUT.DLL is the direct input module of DirectX. Maybe Direct X has an issue. Run dxdiag and see if you have any problems in the log file. cheers

I have had this issue as well, but for the life of me I cant remember how I fixed it. It was a while ago now. That said, my current setup I let AS6.5 do all the weather work not FSUIPC, the only thing I have FUSIPC doing is the taxi wind control. If I recall AS6.5 has some sort of a guide to setup FSUIPC, ie which check boxes to tick etc. I think you have to use one or the other as I think they conflict somehow. I still have this issue that you mentioned: Maybe someone else has a few ideas or fixes.

http://www.projectmagenta.com/pmoffsets/ You can also use the throughpass offset 04F2 and send numbers to the offset. I use 37 and 38 for FD1 and 17 and 18 for FD2 See the heading at the bottom of the page titled "MCP/FCU Codes / MCP/FCU Interface (defined by ELAN Informatique)"

You could try resetting the network stack https://www.google.com.au/webhp?hl=en&tab=ii#hl=en&q=windows+8+network+stack+issues&spell=1

To use Phidgets with fsuipc using the FS2Phidgets application go to this forum here http://www.mycockpit.org/forums/forumdisplay.php?f=123 Jeff

You can use offsets 66C0-66FF which is free for general use, for example in button or keys programming. However what are you trying to send to FS via wideclient? Jeff

Steeve, You can try a usb to serial adapter https://www.google.com/webhp?hl=en&tab=ii&gfe_rd=cr&ei=4RGGUpffN6uN8Qee7YDgBQ#hl=en&q=usb+to+serial , there a heaps around. Should work with the Aera 500.

Thanks Pete, I did a bit of reading of the FS sound SDK and there is no facility to include an airspeed variable. I might look into the vparams in the sound.cfg and see what I can come up with. At the moment I am using a after market sound set by TSS which is certainly better than the default sounds. I might have a look into that. Also Project magenta has added some engine sound ability to pmsounds, could be worth exploring as well. Cheers Jeff

Hi Pete, Just an inquiry if you know if the engine sound volume can be altered in flight. The reason I ask this is that in most rear engined aircraft the engine volume becomes almost non existent once you pass a certain airspeed. As I fly a Learjet in FS it would be nice to reduce the engine sound as I increase in speed. As it is at the moment the engine sounds are just as loud if I am doing 160kts or 320kts. Could this be done in LUA? Thanks Jeff

Have you tried the Plan G forums? http://www.tasoftware.co.uk/forum/index.php?board=3.0 My understand was that Plan G used simconnect with fsx not fsuipc. You can read about the simconnect issue here: http://www.tasoftware.co.uk/forum/index.php?topic=1650.0

My understanding is that FSX will only use 2Gb in the user mode virtual address space. More info here: http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778%28v=vs.85%29.aspx#memory_limits However there seems to be a Large Memory Address aware fix (to use 4Gb) for Win 7 64bit here: http://kostasfsworld.wordpress.com/2012/09/24/oom-out-of-memory-helperfix/ Haven't tried it as I still only use fs9. Like you said adding more physical ram will do nothing for FSX.

Make sure the WideFS client is running on PC2 and PC3. Also make sure you battery and avionics are on in the aircraft as PM will blank the screen when the battery master is off.

I think your thinking about "wideview" http://www.wideview.it/ which is a totally different product. If you what to do dual monitors there are a number of how to videos on YouTube. Check google for dual monitors with fs 9 https://www.google.com.au/webhp?hl=en&tab=ii#hl=en&sclient=psy-ab&q=fs9+dual+monitors&oq=fs9+dual+monitors&gs_l=hp.3..0i30.374471.377255.1.378078.14.13.1.0.0.10.359.3211.2-12j1.13.0....0...1c.1.19.psy-ab.BMxNPxtVvHU&pbx=1&bav=on.2,or.r_cp.r_qf.&bvm=bv.48705608,d.aGc&fp=63b3bced2e283a6f&biw=1963&bih=1004

Your issue lies with FS Symphony, as it is FS Symphony that writes to FSUIPC offsets so the PMDG offsets need to be set in FS Symphony rather than in the FSUIPC window in fs. Your question really need to be address to the creator of FS Symphony rather than here. Have you read the the setup document? http://www.flying-the-winglets.de/Downloads/Symphony15.pdf Upon reading the document I cant find any reference to the PMDG offsets. There may be a way to add them, but again that would be a question for the creator of FS Symphony.

What are you trying to do with WideFS? WideFS just extends FSUIPC to any networked PCs running wideFS so you can run external applications that link to Flight Sim via FSUIPC (ie Project magenta).

What OS?

Whats wrong with using FS controls for trim ie Elev Trim Up and Elev Trim Dn rather than trying to feed it through the offsets. Works fine for my Learjet sim. If you need to alter the effectiveness of the trim you can play with the settings in the aircraft cfg file under the flight tuning section. I run mine at about 1.4 as I needed the trim to be more effective. [flight_tuning] elevator_trim_effectiveness = 1.4 aileron_trim_effectiveness = 1.0 rudder_trim_effectiveness = 1.0

I use Active Sky 6.5 to inject real-time weather into FS9 via FSUIPC http://www.hifisim.c...ch/products.php Short answer, yes.

Which version of FSX are you using? Acceleration? Or just the standard one ? Have you installed the service packs?

FYI the latest version is 3.999w http://forum.simflight.com/topic/66139-updated-modules/ What your reason for renaming the fs executable?

Currently I am using 5 of these in my MCP http://www.phidgets.com/products.php?category=7&product_id=1052_0 with this software: fs2phidgets http://www.mycockpit.org/forums/downloads.php?do=cat&id=20 Its pretty straight forward. The other one you can look at is the goflight module: http://www.goflightinc.com/collections/modules/products/gf-rp48-push-button-rotary Again pretty straight forward. Have a look in to those first as I think it will work better for your situation.

Ahh your ahead of me, thats good. I hope you find out what your issues are.

Some suggestions: Do a memory scan, you have quite a bit of ram, and its possible that one of your sticks may be corrupted. Download and run Memtest86 (you will need to burn it to a disc). With that amount of ram it will take a few hours to do a thorough scan. http://www.memtest86.com/ DirectX updates here : DX9c http://www.microsoft.com/en-us/download/details.aspx?id=8109 DX11 http://www.microsoft.com/en-us/download/details.aspx?id=17431

I did something like this a while ago with Leo's card and 5 rotary encoders for my MCP. If you read this post here: I will tell you however that most encoders only have 16 de-tents per revolution. This is not nearly enough for what you want. In the end I went back to my Phidgets setup. Personally I don't think you will get want you want with Leos card. You need to use a more efficient setup that writes directly to the fsuipc offsets.

Please don't post your key. Its not required. Its a very bad idea.