sisoffi

Pete, the numbers came out from events log. For some of them i have offset and parameter = perfect! for others only offset and parameter is the value of readouts heading, speed altitude. You need to use lua script ?

Hi Pete, Thanks Pete. I wanted to understand this thing. If you notice from the event list that the parameter is the value of the heading for example. What would you try to put in the parameter in fsuipc? I tried to write him to increase by +1, but in the mcp I see the change of the last digit of the header in 1. thanks

Hi Pete, I'm trying to set some swithc, rotaries and buttons in my cockpit from the new maddog. From the fsuipc event list, the offset are very clear. For example: switch apu offset: 69836 with parameter: 16777216 and off 167777217....perfect in fsuipc I have problems with encoders. Inoted offset 69656 but for example the heading change with value incrementale 000 001 002 003 etc and dec 000 359 358 357... so for the parameters in fuispc i have no solution and in fact dont work the encoder. which parameter can put in orde to capture and follow the numbers incremental and decremental? many thanks, Simone

Hi Pete, thank you all right now. i think the airplane i try to map is create with new xml. (new maddogX). So no possible to map with macro :(

by the way im tryng to delete the last version of fsuipc 4974 in order to install a previous version of fsuipc and the delete registration dont work. I open p3d v3 and fsuipc is on the module addons :(

i dont map pmdg is only to test usually worked with past versions like 4966. The syntom is: got to button+switch and click to create mouse macro, enter name and readyto map. Open an aircraft like pmdg737 to test....i clikc one button and no green line appear in order to write name of mouse macro.

yes, im tryng to create mous emacros. Ive tried all aircrafts also pmdg737 usually work, and map nothing.

sorry pete the fsuipc version i s the last 4971

HI Pete, im tryng to mapping some cockpits with p3d 3.422 and fsuipc 4974. all aircarfts i tested not assigned mouse macros. Ive tried with fuipc 4968 and working perfect. Do you know if 4974 mouse macro function work? many thanks Simone

I read the lua plugin manual but it is not as simple and intuitive as I thought. Is there any sample tutorials around? I should also interface a mega arduino to various input outputs? To know then the lvars corresponding to a specific offset?

Hi pete, i need for the maddog leonardo and tfdi 717. I noted that both have Lvars. Is possible to use Lvars direct to fsuipc?

Hi Pete, thanks, yes i mean the mouse macro option you can map via "create macro" in button/switch option. Hope you can try a solution. thanks Simone

Hi Pete, no news for MACRO option in Fsuipc5 ? Many thanks

Hi Thomas, which manual speak of L:Vars ? Lua? thanks Simone

thanks Thomas i will check L:Vars

Hi Pete, today now completely happy in my p3d v4 and I know that there is no longer possible the created macro function. Unfortunately, my maddog recognizes only 90% of macro offsets. This is a drama for me because with the new release of the maddog from here at the end of the year I could not even upgrade my cockpit. Please do everything you can to make this fun again! Simone

thanks pete. yes i use assignement keys for ivap via wideclient. Is this that interfere with keyboard?

Hi Thomas, i tried to start p3d without addons only with fsuipc and same problem. No resolved :(

what do you intend for addons? sceneries? no i use only cad files because is a server Pc with only instruments. addons like OPUS, SIOC and IOCP , but i irepeat without fsuipc all work great. Is fuispc that conflict with one of them? thanks

Hi Pete Thomas, i tried to leave the double buttons section, but nothing same problem. Im very desperate becuse cannot operate with the keyboard. I dont know but if i leave the dll of fsuipc all work perfect.

yes without sioc same problem. Ok i will try tomorrow to leave one button lines. and will report Many thanks thomas

Pete, i attach the ini and the log, but the big problem with fsuipc si that for example if i watn to open a 2d panel in maddog shift+F2 correspond to CPT panel .... he open a takeoff charts (like shift+F9) and the keyborad have all diffrent assignement, if i open a text document or want to change some paramteresin other applications i cannot because change is impossible to click to a specific key. thanks but if i leave a ivao.dll from dll p3d is perfect. Simone FSUIPC4.ini FSUIPC4.log

Thomas: modify INI = Close INI (i cannot save and mantain open INI?) open FSUIPC = reload settings = Close FSUiPC = Reopen FSUIPC? (cannot mantain open fsuipc?) thanks

the lines are: FlapStarts=-16384,-16100,-14200,-13397,-12200,-10730 FlapEnds=-16300,-15000,-13397,-12700,-11259,15919 i need to setup via ini because the flaps have reduce range need to calibrate it and reload axxignements in real time. [General] UpdatedByVersion=4969 History=VVKP85J2ERYGJP4CTZSDH InitDelayDevicesToo=No Annotate=Yes NewInterceptTextMenu=No UseSystemTime=No UseMidMouseBtn=Yes MouseWheelMove=No MouseWheelTrim=No MouseWheelTrimSpeed=1 JoystickTimeout=20 PollGFTQ6=Yes BlankDisplays=No FixControlAccel=No FixMachSpeedBug=No NewDeleteVehiclesForAES=No AutoScanDevices=Yes VisibilityOptions=No OneCloudLayer=No CloudTurbulence=No CloudIcing=No GenerateCirrus=No SuppressCloudTurbulence=No MaxIce=-4 MinIce=-4 UpperWindGusts=No SuppressWindTurbulence=No SuppressWindVariance=No WindTurbulence=No TurbulenceRate=1.0,5.0 TurbulenceDivisor=20,20,40,40 SuppressAllGusts=No MaxSurfaceWind=0 WindLimitLevel=200 WindDiscardLevel=400 WindAjustAltitude=No WindAjustAltitudeBy=2000 SmoothBySimTime=No WindSmoothing=No WindSmoothness=2 WindSmoothAirborneOnly=Yes PressureSmoothness=0 TemperatureSmoothness=0 DisconnTrimForAP=No ZeroElevForAPAlt=No ThrottleSyncAll=No WhiteMessages=No ShowPMcontrols=No SpoilerIncrement=512 MagicBattery=No RudderSpikeRemoval=No ElevatorSpikeRemoval=No AileronSpikeRemoval=No ReversedElevatorTrim=No ClockSync=No ClockSyncMins=5 ClearWeatherDynamics=No OwnWeatherChanges=No TimeForSelect=4 LoadFlightMenu=No LoadPlanMenu=No PauseAfterCrash=No BrakeReleaseThreshold=75 SaveDataWithFlights=No ZapSound=firework ShortAircraftNameOk=Substring UseProfiles=Yes EnableMouseLook=No DelayedMouseLookZoom=No WideLuaGlobals=Yes AxesWrongRange=No TCASid=Flight TCASrange=40 AxisCalibration=No DirectAxesToCalibs=No ShowMultilineWindow=Yes SuppressSingleline=No SuppressMultilineFS=No AxisIntercepts=No DontResetAxes=No ThreadAffinityMask=x0 LuaAffinityMask=x0 InitDelay=0 GetNearestAirports=Yes LogOptionProtect=Yes OOMcheck=Yes OOMcheckInterval=10 TimeForLuaClosing=2 WeatherReadFactor=2 WeatherRewriteSeconds=1 CustomWeatherModify=No SimConnectStallTime=20 InitialStallTime=10 NormalStallTime=1 LuaRerunDelay=66 Console=No FSVersionUsed="Lockheed Martin® Prepar3D® v3",3.4.18.19475 SimConnectUsed=3.4.0.0 [JoyNames] AutoAssignLetters=No 0=Saitek Pro Flight Combat Rudder Pedals 0.GUID={B87A8170-9540-11E5-8008-444553540000} 1=Saitek Pro Flight Combat Rudder Pedals 1.GUID={B87AA880-9540-11E5-8009-444553540000} 2=BU0836X Interface 2.GUID={B87AA880-9540-11E5-800A-444553540000} 3=BU0836X Interface 3.GUID={B87ACF90-9540-11E5-800B-444553540000} [Axes] PollInterval=10 RangeRepeatRate=10 0=0X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 1=0Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 2=0R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 3=1X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 4=1Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 5=1R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 6=3X,256,D,2,0,0,0 -{ DIRECT: Elevator }- 7=3Y,256,D,1,0,0,0 -{ DIRECT: Aileron }- 8=3R,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 9=3U,256,D,23,0,0,0 -{ DIRECT: Flaps }- 10=3V,256,D,22,0,0,0 -{ DIRECT: Spoilers }- 11=3S,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- [MacroFiles] 1=MD80 AUDIOPANEL 2=MD82DIMMERS 3=MD82EFIS_CS 4=MD82EFIS_FO 5=MD82FMS 6=MD82GLARE 7=MD82MCP 8=MD82MIP 9=MD82OVERHEAD 10=MD82PEDESTAL 11=MD82RADAR 12=MD82TRC 13=MD82_MENU [LuaFiles] 1=MD80_EAOP_LEDS 2=log lvars [Auto] 1=Lua MD80_EAOP_LEDS [Buttons] PollInterval=25 ButtonRepeat=20,10 1=P3,5,CM10:8,1 -{Macro MD82PEDESTAL: PNEU_XFEED_R}- 2=U3,5,CM10:8,0 -{Macro MD82PEDESTAL: PNEU_XFEED_R}- 3=P3,4,CM10:7,1 -{Macro MD82PEDESTAL: PNEU_XFEED_L}- 4=U3,4,CM10:7,0 -{Macro MD82PEDESTAL: PNEU_XFEED_L}- 5=P3,2,C65988,0 -{MIXTURE2_RICH}- 6=U3,2,C65992,0 -{MIXTURE2_LEAN}- 7=P3,1,C65983,0 -{MIXTURE1_RICH}- 8=U3,1,C65987,0 -{MIXTURE1_LEAN}- 9=R3,7,CM10:2,0 -{Macro MD82PEDESTAL: GEAR HORN}- 10=R3,13,CM10:3,0 -{Macro MD82PEDESTAL: LONGTRIM_INC}- 11=R3,14,CM10:4,0 -{Macro MD82PEDESTAL: LONGTRIM_DEC}- 12=R3,3,CM10:12,0 -{Macro MD82PEDESTAL: ALT_LONG_TRIM}- 13=P3,6,CM10:6,1 -{Macro MD82PEDESTAL: RUD_HYD_CONT}- 14=U3,6,CM10:6,0 -{Macro MD82PEDESTAL: RUD_HYD_CONT}- 15=P3,12,CM10:5,1 -{Macro MD82PEDESTAL: FUELXFEED}- 16=U3,12,CM10:5,0 -{Macro MD82PEDESTAL: FUELXFEED}- 17=R3,15,CM10:4,0 -{Macro MD82PEDESTAL: LONGTRIM_DEC}- 18=R3,16,CM10:3,0 -{Macro MD82PEDESTAL: LONGTRIM_INC}- 19=P3,17,CM7:4,0 -{Macro MD82MCP: AP}- 20=P3,10,CM7:3,0 -{Macro MD82MCP: ATHR}- 21=P3,9,CM10:1,0 -{Macro MD82PEDESTAL: TO/GA}- 22=P3,11,CM10:1,0 -{Macro MD82PEDESTAL: TO/GA}- 23=P2,7,K113,9 -{Key press: shft+F2}- 24=P2,6,K114,9 -{Key press: shft+F3}- 25=P2,0,K115,9 -{Key press: shft+F4}- 26=P2,5,K116,9 -{Key press: shft+F5}- 27=P2,4,K119,9 -{Key press: shft+F8}- 28=P2,1,CM1:2,0 -{Macro MD80 AUDIOPANEL: PA_INT_BUTT}- 29=P2,17,K49,8 -{Key press: 1}- 30=P2,13,K50,8 -{Key press: 2}- 31=P2,12,K55,8 -{Key press: 7}- 32=P2,15,K57,8 -{Key press: 9}- 33=P2,10,K123,10 -{Key press: ctl+F12}- 34=P3,26,CM11:1,0 -{Macro MD82RADAR: CPT_TFR}- 35=P3,25,CM11:2,0 -{Macro MD82RADAR: CPT_WX+T}- 36=P3,24,CM11:3,0 -{Macro MD82RADAR: CPT_WX}- 37=P3,23,CM11:4,0 -{Macro MD82RADAR: CPT_MAP}- 38=P3,22,CM11:5,0 -{Macro MD82RADAR: CPT_CGS}- 39=P3,31,CM11:6,0 -{Macro MD82RADAR: PWR}- 40=P3,34,CM11:14,0 -{Macro MD82RADAR: CPT_TILT_DEC}- 41=P3,28,CM11:7,0 -{Macro MD82RADAR: TEST}- 42=P3,30,CM11:10,0 -{Macro MD82RADAR: FO_WX}- 43=P3,29,CM11:11,0 -{Macro MD82RADAR: FO_MAP}- 44=P3,36,CM11:13,0 -{Macro MD82RADAR: CPT_TILT_INC}- 47=P2,14,C65752,1 -{PARKING_BRAKES}- 48=U2,14,C65752,0 -{PARKING_BRAKES}- 49=P2,21,C65752,0 -{PARKING_BRAKES}- 50=P2,11,CM1:1,0 -{Macro MD80 AUDIOPANEL: PA_INT_SWITCH}- 51=R3,0,C66080,0 -{GEAR_DOWN}- 52=U3,0,C66079,0 -{GEAR_UP}- 53=U2,11,C0,0 -{Custom control: <0>}- [AutoSave] Next=1 Interval=60 Files=10 SaveOnGround=No AutoSaveEnabled=No [GPSout] GPSoutEnabled=No [GPSout2] GPSoutEnabled=No [Traffic Limiter] TrafficLimit=0 AirportPreference=50 GroundPreference=50 NearerPreference=50 PlannedAirportsPreference=50 TargetFrameRate=0 [WideServer] WideFSenabled=Yes [Sounds] Path=C:\Lockheed Martin\Prepar3D v3\Sound\ Device1=Driver audio principale Device2=Altoparlanti (Realtek High Definition Audio) Device3=Altoparlanti (4- C-Media USB Headphone Set ) Device4=Altoparlanti (Sound Blaster X-Fi Go! Pro) [JoystickCalibration] AllowSuppressForPFCquad=Yes ExcludeThrottleSet=No ExcludeMixtureSet=Yes ExcludePropPitchSet=Yes SepRevsJetsOnly=No ApplyHeloTrim=No UseAxisControlsForNRZ=No FlapsSetControl=0 FlapDetents=Yes ReverserControl=66292 Reverser1Control=66422 Reverser2Control=66425 Reverser3Control=66428 Reverser4Control=66431 MaxThrottleForReverser=256 AileronTrimControl=66731 RudderTrimControl=66732 CowlFlaps1Control=66162 CowlFlaps2Control=66163 CowlFlaps3Control=66164 CowlFlaps4Control=66165 MaxSteerSpeed=60 Throttle1=-16319,-8200,-2787,15544/8 Throttle2=-16311,-8568,-4885,13712/8 Elevator=-16380,-512,512,16380 LeftBrake=13741,16384/24 RightBrake=12684,16384/24 Spoilers=-14814,-7031/8 Rudder=16320,16320,16320,16380/8 Flaps=-15863,-10242/8 FlapStarts=-16384,-16100,-14200,-13397,-12200,-10730 FlapEnds=-16300,-15000,-13397,-12700,-11259,15919 Aileron=-10832,3147,6526,16359/24 SlopeAileron=-13 SteeringTillerControl=0 SteeringTiller=-16380,0,0,16380/8 SlopeRightBrake=-15 SlopeRudder=-15 SlopeSteeringTiller=15 [Programs] Run1=READY,CLOSE,"E:\Programmi\IOCards\Modules\IOCModules.exe" Run2=READY,CLOSE,"C:\OpusFSI\FSISERVER.EXE" Run3=READY,CLOSE,"C:\Program Files (x86)\FlyingWSimulation\SuperTrafficBoard for Prepar3D V3\TrafficBoardFrontEnd.exe" Run4=READY,CLOSE,"C:\Program Files (x86)\SkalarkiIO Profiler\SkalarkiIOProfiler.exe"

Hi Pete, I have this problem for a long time in prepar3D also updating to the latest version as you suggested. I need to adjust the values of the flap potentiometer through the ini, save the file and read it to fsuipc with reload all axignement. Nothing to do, need to restart P3D. Any suggestions? Attached to the log. Simone FSUIPC4.log