Thomas Richter

Hi, using AutoSave with PMDG check the FSUIPC4 User Guide.pdf and FSUIPC4 for Advanced Users.pdf They are both in (Your_FSFolder)\Modules\FSUIPC Documents\ located. Thomas

Hi, in case neither old nor new key is working, did you check your PC date is correct set? It has to be later than when you bought either key. Thomas

Hi, the error is not FSUIPC related as it gives already the source, FS Recorder by Matthias Neusinger. Best would be to contact them, they might have a newer version? Also if that sometimes happen with PMDG, PMDG doesn't use FSUIPC they use SimConnect instead. Thomas

Hi, did you update to latest FSUIPC3 version, you have to since 2016? Thomas

Hi, that's the right place, just describe what your problem is. Thomas

Hi, sorry but there is no shouting at all. You are just writing under a topic that has nothing to do with your problem and you should have just opened a new topic because no one would expect a key problem here. But anyway the key information is copied from SimMarket page (FSUIPC) and if you cannot find they in your account information as they describe you will have to open a Ticket on their page http://secure.simmarket.com/ticket_create.php The support forum cannot help for sales problems. I really would wait up to 24 hours within you normally should get the key (my own experience). Thomas

Did you check that Simmarket's procedure didn't work and nothing is shown in your account ? REGISTRATION KEY Registration key after purchase, see order details page in customer account Thomas

Hi, the only place where you can officially download the installer for FSUIPC and other Modules from Pete Dowson is here above the forum Download Links -> Updated Modules and http://www.schiratti.com/dowson. However this is the download link for latest installer of FSUIPC4, Install FSUIPC4.955c The only place where you can buy a registration key is SimMarket. The downloaded ZIP file contains three files: FSUIPC4 Changes.pdf, Install_FSUIPC4.exe and the most important Installing and Registering FSUIPC4.pdf. Make sure you read the very short installation guide first before trying to install. Thomas

So nothing of this IVAP is actually running on the FS9 PC? If so, does the Client PC connects correct with WideClient to FS? Do you use as well latest WideFS for the FS9 and latest WideClient on your Clients? Thomas

Hi, you should have noticed that your INI file shows very clear you have for default AC's the Throttle-HOTAS Warthog assigned but for the PMDG the Joystick-HOTAS Warthog with same axis (Z, R) !? [JoyNames] AutoAssignLetters=No A=Joystick - HOTAS Warthog B=Throttle - HOTAS Warthog C=Saitek Pro Flight Rudder Pedals 0=Joystick - HOTAS Warthog 0.GUID={B8AFA370-1A90-11E6-8001-444553540000} 1=Throttle - HOTAS Warthog 1.GUID={B8AFCA80-1A90-11E6-8002-444553540000} 2=Saitek Pro Flight Rudder Pedals 2.GUID={B8B08DD0-1A90-11E6-8007-444553540000} ... [Axes] ... 3=BZ,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 4=BR,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- ... [Axes.FSX B747] RangeRepeatRate=10 0=0Z,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 1=0R,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- For default you use controller B (1) but for PMDG you use controller 0 (A) Thomas

In case neither log file shows an error, is this IVAP interface installed on FS PC or on a client? Is there maybe a different interface for FS9 and you use a newer version that doesn't support FS9? As you say in your first email the interface gives an error that it cannot connect to FSUIPC, does it run with the same privileges as FS9 does? Thomas

Hi, sorry I forgot to ask as well for the FSUIPC.log file (complete file) when FS was running and normal closed. Please copy and paste it to a message. Thomas

Hi, Please send your FSUIPC Install log file by copy and paste it to your message. Thomas

Hi, nothing wrong with what you do. Check your PC Date is current. Thomas

Hi, FSUIPC is not a replacement for any existing driver like the Saitek one, but it is a tool. If you want to remove your Saitek driver you will need to program something similar e.g. with Lua (integrated in FSUIPC) to control your Saitek stuff. Thomas

Hi, no need to uninstall anything! Just run the FSUIPC4 installer and best copy and paste your registration info. Thomas

Hi, if you just want to write values that your program reads like in a switch(){ case: ... break;} decision, you would write the values in a logical way for the keys, clockwise or anti-clockwise. Clockwise: up=1, right=2, down=3, left=4 Anti-clockwise: up=1, left=2, down=3, right=4 Thomas

Hi, First you should have started a new topic with your problem instead of appended to this different one! Controller inputs are seen and sent to FS when they changed their status ON/OFF. That means nothing will sent when the status in FS changes compared to the controller input, only in the opposite way. You can set your controller input definition on Buttons + Switches page to Control to repeat while held then the ON position will repeated sent when the switch is in ON position. Normally when you leave the aircraft you switch everything to OFF and so when you re-enter a aircraft all switches will be conform with the saved flight. If you load a different AC not with a saved flight then FS/ P3D will decide in which position switches are. The only other way I can think of would be to write a Lua script that sets those switches to a defined position anytime you load an AC or reload a flight. Later: By looking at the manuals of Desktop Aviator switch panels you will for example find that exactly this problem is described ! Default Positions: Before starting your copy of MS2004 or FSX, you must position the following toggle and rocker switches to the default settings: - Master Alternator Rocker Switch to ON - Master Battery Rocker Switch to ON - Master Avionics Rocker Switch to ON - Ignition Switch set to Magnetos BOTH Thomas

Hi, FSUIPC doesn't do anything on its own, only what you ask for to do it. Make sure you have all needed things active that the engine can run: - available fuel in tanks - tank selector correct set - mixture to max - Engine Fuel Valve open In case most other aircrafts, I guess default ones, work correct it will have to do with standard setting you use that will not work in that add-on aircraft. Can you physically see that really all function in the profile are working correct in the cockpit of the aircraft? Add-on aircrafts very often don't use standard FS controls but there own programmed logic. I would recommend to remove the profile settings for the C208 and put them back one after each other to see which one causes the problem. Thomas

In WideClient.ini you use those lines Keysend1 = 162.16; means Press left CTRL key Keysend2 = 162.24; means Release left CTRL key but you use a decimal ( . ) instead of a comma ( , ), so that will not work at all ! It has to be like this Keysend1 = 162,16; means Press left CTRL key Keysend2 = 162,24; means Release left CTRL key The FSUIPC4 Install.log file doesn't help, it would be the FSUIPC4.log file, located in the same folder where you found the FSUIPC4.ini file. Please update also to latest FSUIPC4.955c , any older version cannot be supported. From WideClient.ini file remove the line ServerIPAddr=192.168.0.1 and make sure the ServerName is correct. ServerName=SERVER Thomas

Hi, why you use both? You use one or the other, preferred would be ServerName= Servername=SERVERServerIPAddr=192.168.0.1 Also it always helps to see the original full files, you can copy and paste the content here, FSUIPC4.ini / FSUIPC4.log / WideClient.ini / WideClient.log Thomas

Hi, I've never mentioned "WideServer". The thing on your client PC is called WideClient! The parameter is in the WideClient.INI file! It is the Client PC, not the Server PC where you have the problem, right? Why would you ever think of changing anything on the Server? There is no "ClassInstance" parameter on the Server, because it is running inside FS. FS IS FS, it isn't WideClient trying to LOOK like FS!!! Didn't you read Pete's comment on that? You still show that you put the ClassInstance=1 parameter into the FSUIPC.ini file [WideServer] section !? What is anyway the intension to run a WideClient on the FS PC? What you want to control with the WideClient on the FS-PC that sends to FSUIPC on the same PC to send then something over the network to other WideClients? Maybe best would be to describe first very clear what you want to achieve. Thomas

Hi, very good so. Don't forget what Pete said about PMDG to define the Throttle lever Are you testing with the PMDG 737NGX or 777X, by any chance? If so the only assignments which work correctly are those to the normal Axis throttleN set controls, and you cannot use FSUIPC calibration. This is because both those aircraft read the throttle axes directly, not from the normal FS input which FSUIPC feeds. The same could conceivably apply to some other add-on aircraft, so always check things with default aircraft. Thomas

Hi, [Axes] ... 5=1Z,256,D,4,0,0,0 -{ DIRECT: Throttle }- ... the INI file shows that you have the you have the Z axis defined as throttle (one axis for all engines) for any aircraft that doesn't have an profile with its own throttle definition. Controller 1 is 1=Saitek Pro Flight Cessna Trim Wheel But then you will find in almost all defined profiles multiple definitions for Throttle (all engines) and separate definition for each engine on a different controller, two examples below! [Axes.Carenado BE58] RangeRepeatRate=10 0=0X,256,D,7,0,0,0 -{ DIRECT: LeftBrake }- 1=0Y,256,D,8,0,0,0 -{ DIRECT: RightBrake }- 2=0R,256,D,3,0,0,0 -{ DIRECT: Rudder }- 3=1X,256,D,21,0,0,0 -{ DIRECT: ElevatorTrim }- 4=1Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 5=1Z,256,D,4,0,0,0 -{ DIRECT: Throttle }- 6=1U,256,D,5,0,0,0 -{ DIRECT: PropPitch }- 7=1V,256,D,6,0,0,0 -{ DIRECT: Mixture }- 8=2X,256,D,1,0,0,0 -{ DIRECT: Aileron }- 9=2Y,256,D,2,0,0,0 -{ DIRECT: Elevator }- 10=2Z,256,D,18,0,0,0 -{ DIRECT: PropPitch2 }- 11=2U,256,D,13,0,0,0 -{ DIRECT: Mixture1 }- 12=2V,256,D,14,0,0,0 -{ DIRECT: Mixture2 }- 13=3X,256,D,9,0,0,0 -{ DIRECT: Throttle1 }- 14=3Y,256,D,10,0,0,0 -{ DIRECT: Throttle2 }- 15=3Z,256,D,17,0,0,0 -{ DIRECT: PropPitch1 }- [Axes.C185F] RangeRepeatRate=10 0=0X,256,D,7,0,0,0 1=0Y,256,D,8,0,0,0 2=0R,256,D,3,0,0,0 3=1X,256,D,21,0,0,0 4=1Y,256,D,2,0,0,0 5=1Z,256,D,4,0,0,0 6=1U,256,D,5,0,0,0 7=1V,256,D,6,0,0,0 8=2X,256,D,1,0,0,0 9=2Y,256,D,2,0,0,0 10=2Z,256,D,4,0,0,0 11=2U,256,D,5,0,0,0 12=2V,256,D,6,0,0,0 As I thought there are multiple definitions for throttle, where D,4 is all throttle and D,9 is throttle1 / D,10 is throttle2 You might be better off to define those profiles new and use AutoAssignLetters=Yes. Thomas

Hi, Throttle will go to full power (bouncing all the time) and with the throttle quadrant in full power position the FSX or P3D throttle goes back to idle....I can't take off.. Any thoughts? I've reloaded drivers, etc.. But that clearly indicates it gets overwritten by a different input. Can you copy and paste your FSUIPC4.ini. Activate the Logging for Axis controls and then do a small test on the ground, throttle moving from idle to full (leaving the throttle in that position) and then ending FS or P3D. That will give an first idea where that comes from, a different axis input or a different source other than an axis. Copy and paste then that complete log file here as well. Thomas