Thomas Richter

Hi, you might be better off to go to WideView forum (Napolitano), if no user here knows something. This forum is related to Pete Dowson's stuff like FSUIPC, WideFS and others. Thomas

Hi, where did you define the throttle, in FSUIPC or FS? If you define in FSUIPC you need to disable controller in FS/ P3D! It sounds like you have actually two controller defined to the same function. Thomas

Hi, VAS is depending on what is running and how much memory FS/ P3D needs for mostly sceneries and FSUIPC does give you that info without being involved WHY, just THAT such is used. If you feel it is too much memory used you would need to find out maybe which add-on e.g. scenery is responsible for that. 74755 Lost focus to PID=2396, "explorer.exe" Lost focus means as what it says, FS lost the focus/ is no longer the active window because you clicked/ activated a different program, here the Windows Explorer. 79529 Deactivated for PID=2396, "explorer.exe" Deactivated means simple you activated/ clicked on again FS window, so the here Windows Explorer is deactivated/ no longer the active window with focus. Focus lost: culprit unknown You might have just clicked anywhere on the screen other than on FS and so FS lost the focus but no other program got the focus (other than Windows itself). When a programs has the Focus it is (if not other programmed) the one that gets the input e.g. from keyboard. Thomas

Hi, yes you can by using Profiles, check the user manual page 17. Thomas

Hi, please send the full log file, not only a fraction. Do you maybe have AutoSave active? AutoSaveEnabled=Yes Thomas

Hi, please check the top topic as it describes that you need to use the latest FSUIPC3 installer from 2016 on. Thomas

Hi, you are running/ installed a old version that will not work as registered anymore since 2016, see info above FSUIPC3: New registrations for 2016 will need FSUIPC version 3.999z9b Just update to latest version from Download Links page, top of the forum. Thomas

Hi, ... Anyway I have the version 4.09 and there is no sign of a log file in those places. ... FSUIPC4.09 is actually from April 2007 ! First of all you need to install latest Installer FSUIPC4.955

Hi, no, it is the only to use some conversation math and simplest way I can think of is to use Lua, as it is implemented in FSUIPC. Thomas

Hi, just check the FSUIPC4 Offsets Status.pdf (located in ..\Modules\FSUIPC Documents folder) for the following Offset. 0354, 2, Transponder setting, 4 digits in BCD format: 0x1200 means 1200 on the dials. Thomas

Hi, these Offsets are hex address and operate bits. 561A Bit 0 for Cutoff1 561A Bit 1 for Cutoff2 The only 'other' Offsets are the FS Offsets listed in the FSUIPC4 Offsets Status.pdf as Mixture (located in ..\Modules\FSUIPC Documents folder), but they are Values not Bits. May be Sim-Avionics uses there own Offsets/ Bits for Cutoff Lever? Thomas

Hi, make sure you disabled Controller in FS in Controller Settings, also as Hotkey available CTRL+K (toggle). Thomas

Hi, Throttle offsets will be the FS ones, 088C 2 Engine 1 Throttle lever, –4096 to +16384 0924 2 Engine 2 Throttle lever, –4096 to +16384 The Cutoff lever Offsets will be the Project Magenta ones, CS driver has to run of course. 561A Bit 0 for Cutoff1 561A Bit 1 for Cutoff2 Thomas

Hi, the problem is mostly the migration tool that fakes a installed FSX version in P3D folder. You should find any information about the problem in the Installer log file, located in Moduls folder and the folder where the installer was running from. Just copy and paste the content of the FSUIPC4 Install.log into a message here. Thomas

Hi, Thank tou Thomas, first though I wonder why your reply didn't generate an email to me as other forums do? Don't know, I would expect it depends on your settings for the forum. So you're saying it's a different box I have to tick in P3D than the one in FSX? Settings for FSX and P3D are the same. If you don't use Log Extras then it will show at the end of the log after closing FS. E.g. here: Minimum available memory recorded was 3019Mb If you set Log Extras then it will log all the time depending on interval setting, e.g. here: 21344 Advanced Weather Interface Enabled 63000 Memory in use: 1682Mb, Avail=2414Mb 123188 Memory in use: 1682Mb, Avail=2414Mb 183359 Memory in use: 1682Mb, Avail=2414Mb 243500 Memory in use: 1682Mb, Avail=2414Mb 303672 Memory in use: 1677Mb, Avail=2418Mb 363875 Memory in use: 1823Mb, Avail=2273Mb 424125 Memory in use: 1826Mb, Avail=2270Mb 484344 Memory in use: 1837Mb, Avail=2259Mb 544516 Memory in use: 1865Mb, Avail=2231Mb 604781 Memory in use: 1902Mb, Avail=2194Mb 665000 Memory in use: 1918Mb, Avail=2178Mb 725234 Memory in use: 1933Mb, Avail=2163Mb 785453 Memory in use: 1933Mb, Avail=2163Mb 845656 Memory in use: 1929Mb, Avail=2167Mb Does your log file show after closing FS the Minimum available memory recorded was xxxxMb ? Thomas

Hi, they are not lines you can place into the INI file. Just go to FSUIPC4 Button + Switches tab and press the button for Rudder-Trim left, then select as it shows in ButtonOffset_Decr (second pic). Then press the button for Rudder-Trim right, then select as it shows in ButtonOffset_Incr (first pic). Regards Thomas

Hi, FSUIPC4 always creates a Log file. Check the Log Extras box that will log the Memory in Use continuously (depending on interval setting). Regards Thomas

Hi, when you run the installer FSUIPC4.955 it will install the latest FSUIPC into your FSX-SE and P3D, actually into any installed FS version. It will NOT change any settings of your existing FSUIPC installation of FSX-SE. Make sure you run P3D once before you run the FSUIPC4 installer. Regards Thomas

Hi, I have FSX with FSUIPC 4.955 not working. this might not be the right wording as already the attached INI file shows it is working. You always need to attach the latest FSUIPC4 log file. Can you see and calibrate that controller in Windows Controller panel (in Systems panel)? Regards Thomas

Hi, in addition to Pete. Make sure you didn't create a Homegroup on your Win7 PC, because XP and older cannot access those.

Hi, it's the TQ that normally has two USB connections. Still you didn't say if there is one of those drivers running at all? Also where are the throttle lever defined, speed brake and flaps lever?

Hi, the RevSim TQ has normally two USB connections. One connects the special board operates by one of the drivers and the other is seen as a joystick card. The one seen as a joystick card will still be recognized by Windows as a joystick card as so by FSUIPC. The card that is seen as a joystick card is the one that connects to the REV lever and other buttons. Thomas

Hi, when it was registered already before then there is no need to register it again. Also how do you know it is not registered? There should be FSUIPC4.key file in modules folder with your registration info. !! Never show or attach your registration info !! Thomas

Hi, if I remember correct only the Reverser and different Buttons have to be defined/ calibrated via FSUIPC. The both throttle lever were connected to a Opencockpit card, SIOC driven (Opencockpits software driver), or Revolution Simproducts driver (Throttle Quadrant Driver). How are the Throttel lever calibrated, should be the above way (the only one I know of) but maybe there is a different way I don't know? As You described in your first post you defined/ calibrated only the Reverser and various functions that's why I guess there is a driver that handles the other functions already. Just check if something like described, SIOC or Throttle Quadrant Driver, is running and close the program before trying to go into FSUIPC. Thomas

Hi, in case you say you use a RevSim throttle, make sure you disable its driver. Depending on which hardware version, RevSim driver or Opencockpits software. Thomas