-
Posts
1,227 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Downloads
Everything posted by Andydigital
-
FSUIPC7 closing shortly after MSFS running [Windows 11].
Andydigital replied to chrisal's topic in FSUIPC7 MSFS
I see the option to not close FSUIPC when the sim closes is actually gone now. I updated FSUIPC yesterday so not sure when you removed that option. so I will stop FSUIPC from starting with the sim, to see if that helps show anything. I don't currently have a log from a flight where FSUIPC stopped mid flight. I'll post one when it happens again, sorry. -
FSUIPC7 closing shortly after MSFS running [Windows 11].
Andydigital replied to chrisal's topic in FSUIPC7 MSFS
I don't have that option enabled so it shouldn't be closing if it see's MSFS close or not. -
FSUIPC7 closing shortly after MSFS running [Windows 11].
Andydigital replied to chrisal's topic in FSUIPC7 MSFS
https://www.microsoft.com/en-gb/software-download/windows11 If you wait for windows update to show you it will be 6 months before it shows up for the majority. I'm not reinstalling anything John I've only just done a fresh (including format) install of Windows 11 it shouldn't need reinstalling. You have access now so I will wait thanks. -
There is a folder with fsuipc in its name in the community folder, that must be there otherwise FSUIPC wont be able to access things like LVAR's in the sim.
-
FSUIPC7 closing shortly after MSFS running [Windows 11].
Andydigital replied to chrisal's topic in FSUIPC7 MSFS
My hardware meets all requirements (TPM 2.0, Secure Boot, etc) and Windows 11 was released to the general public over a week ago, that's when I installed it. FSUIPC7 frequently dies for no apparent reason on Windows 11. It wasn't particularly reliable before on Windows 10, programs like Pilot2ATC wouldn't connect to FSUIPC until you killed and restarted FSUIPC7. That doesn't appear to be an issue in this clean install of Win11 but the random FSUIPC process vanishing and P2ATC disconnecting are. They can be anywhere from a few seconds after launch of a flight in the sim to a couple hours later. If there is anything I can do to assist please do reach out. -
Lorbys Axis and Ohs handles the VRi displays fairly easily with his VriBridge plugin. The original MCP combo is not supported though, just the MCP2 Boeing and Airbus FCU panels. As for the jumping, yeah that's worn encoders, think yourselves lucky them lasting so long. My original Combo need a replacement board after a little over a year.
-
Stream Deck Support in FSUIPC
Andydigital replied to pilotjohn's topic in FSUIPC Support Pete Dowson Modules
Spad.Next is adding support for the Stream Deck, its already available in the beta version. Unfortunately the trial version doesn't allow for testing of beta builds, but I took the plunge anyway and it is working great and Spad.Next is a very powerful tool anyway. They are even adding support for VRInsight gear in the not too distant future. -
FSX:SE g3d.dll error is back...
Andydigital replied to Richard Oberwinkler's topic in FSUIPC Support Pete Dowson Modules
My opinion on this is that if Dovetail are selling this (FSX) as an ongoing concern they should fix this problem themselves rather than expect Pete to fix/fudge it. If they aren't able to fix it then they shouldn't be selling FSX at all. -
I think you haven't followed the instructions exactly, I had a similar issue when I first tried, likely you have chosen one of the wrong word types for the offset.
-
Have you checked your spam fIlters and junk folders to make sure the reply from Simmarket has not been deleted by mistake?
-
My Registration Won't Wrok
Andydigital replied to High Plains Flyer's topic in FSUIPC Support Pete Dowson Modules
He sounds like he doesn't have the full file names with extension showing, so it would indeed look like there is more than one file called fsuipc and hence the confusion. Perhaps he deleted the key file. -
Airbus & FSUIPC.ini settings for AutoSave
Andydigital replied to Joachim_Joe's topic in FSUIPC Support Pete Dowson Modules
It will not delete any old files that were there before you added the also manage lines, you need to remove those manually. Any new files will be handled correctly. -
Trackir 5 and FSUIPC4 4.937
Andydigital replied to bytes2001's topic in FSUIPC Support Pete Dowson Modules
If the left light was flashing on and off on the TrackIR that means it cannot see the tracking dots on your hat clip or the IR LEDs if you are using the track clip pro, the most usual cause of this is because you are in a brightly sun lit room and the IR radiation from the sun is interfering with TrackIR, you can turn up the filtering in the software to stop this to some degree. -
Pete, don't make holidays now!
Andydigital replied to guenseli's topic in FSUIPC Support Pete Dowson Modules
No it doesn't, it will partly work like it always does, but every feature will not be available, things like wind smoothing, mouse macros and friction changes will not work as the memory addresses change with every update regardless of how small the changes Lockheed make, even a one bit change could potentially break FSUIPC compatibility if it causes the memory addresses to shift. -
Missing joystick causes ini file mess
Andydigital replied to tincan's topic in FSUIPC Support Pete Dowson Modules
You need to update to a supported version first and try again before Pete can offer support, the problem may have already been fixed in the later version. 4.921f is a fair few months old now. Just in case you missed it Pete is still away on holiday at the moment. http://forum.simflight.com/topic/66139-updated-modules/ -
INI file comments not persistent
Andydigital replied to Gypsy Baron's topic in FSUIPC Support Pete Dowson Modules
I'm sure Pete would appreciate the extra purchase for another PC but that isn't needed, you are allowed to install FSUIPC on as many PC's as you want as long as they belong to you. The FSUIPC licence is person specific not PC specific, which makes a refreshing change in this day and age of FS developers trying to wring every cent out of its customers.I also remember reading about ini comments being removed before, it may be worth searching for an answer while Pete is still away. -
FSUIPC Options and settings unreadable
Andydigital replied to Kit Yardley's topic in FSUIPC Support Pete Dowson Modules
Version 4.09 is about 7 years old at least, updates for FSUIPC come out almost weekly sometimes so I think it's time to install an update, to get support having the latest version installed is a minimum requirement anyway. You will find the latest version at the page below. http://forum.simflight.com/topic/66139-updated-modules/ Updates are always free (within major versions i.e. 3.x or 4.x) and do not cause any harm or lose your settings and assignments. -
FSX is having a problem with FSUIPC.DLL
Andydigital replied to Portanav's topic in FSUIPC Support Pete Dowson Modules
http://forum.simflight.com/forum/141-faq/ Please read the first topic listed on that page above. -
The link on the page below is working fine, are you sure you are looking in the correct place. http://forum.simflight.com/topic/66139-updated-modules/ Here (below) is the current download, but be certain to check if it really is the latest version by visiting the page above first. Install FSUIPC4936.
-
FSUIPC crashes FSX - please see log files
Andydigital replied to Denham_Flyer's topic in FSUIPC Support Pete Dowson Modules
My money is on that the Estonia Migration tool has caused this because it has been left in FSX virtual mode. It's got nothing to do with the A2A tool which has been natively written to work with both FSX and P3D. If the user is trying to use the migration tool to get the FSX version of the A2A aircraft working in P3D then you will have problems as that is not allowed or supported for the C172 and Piper Cherokee. -
P3D 2.3 - wait until FSUIPC is updated
Andydigital replied to aua668's topic in FSUIPC Support Pete Dowson Modules
Many features won't work properly until Pete updates FSUIPC to support version 2.3. -
P3D 2.3 - wait until FSUIPC is updated
Andydigital replied to aua668's topic in FSUIPC Support Pete Dowson Modules
I don't use 8.1 either and I wouldn't do even if Microsoft paid me to lol, I was told by a friend that it worked OK. -
P3D 2.3 - wait until FSUIPC is updated
Andydigital replied to aua668's topic in FSUIPC Support Pete Dowson Modules
I've heard that the version in the thread below should at least stop the crashes, it's likely it's not fully functional though with the latest release version. http://forum.simflight.com/topic/77186-joystick-disconnect-windows-81/?p=469404 -
makerwys.exe vanishing from FSX folder ?
Andydigital replied to elsmoko's topic in FSUIPC Support Pete Dowson Modules
I suspect they are moving it to a folder of their choosing and running it there rather than just deleting it, they probably want to build a database somewhere in their own folders rather than mess around with the files in the FSX root folder. Why not simply mark the MakeRwys.exe as read only like Pete said earlier then this other software cannot move it.