Gunu

Basically, that's what I said? "Thomas Cook were slow to move with the times like other airlines were doing"

As you have already been given a solution for this, I just would like to add that for other airports that you may be wondering about, if you pick a taxiing aircraft, just right click on the unlabelled taxiway as though you were assigning a route and make a note of it for future use. But a chart will do the job just as well.

Thomas Cook was a subsidiary of Condor. Sad to see another airline disappear, but the reason I think they went under is because Easyjet undercut them and flooded their markets. Also Thomas Cook were slow to move with the times like other airlines were doing. Easyjet have almost 50 percent of total daily movements at Gatwick, as owners of that DLC will see when controlling at that airport.

Hehe...……..it is a wishlist after all! I wish there were no bugs on release. If I aim high, I hope the developers would try and achieve close to this. 🙂

Departing A380 a/c cannot be routed via N J, as in the chart below.

Firstly I would like to highlight that this wish list commencement has not been mentioned on Steam at all, so all the users on Steam that don't know about this forum will be missed out! I only stumbled upon this topic when looking for a solution to an airport problem. My wishlist in no order of preference. 1, No bugs on final release. 2, No multiple penalty for same single event. 3, A sound played when an alert for a collision is shown (for 2 screen users busy lookimg at 2nd screen) 4, Remove red light from top of tail on airliners, should only be on GA aircraft 5, Ability to be able to rotate ADIRS to fit screen. 6, Option to remove road traffic. 7, The ability to narrow down gate assignment for landing a/c, to aid taxi route planning. 8, Large aircraft like A380 not being parked down alleyway, possibly size gates to avoid this. 9, Ability to taxi an aircraft from runway, even though its gate is not free, possibly to a holding point, instead of blocking the runway exit. 10, Once an aircraft is no longer visible to the eye, camera not to turn and focus on it when selected 11, Option to assign another key/joystick button for push to talk. 12, Better core code optimisation for cpu and graphics chips. 13, Random delays capability instead of fixed timetables that can become predictable with use. 14, Aircraft towed off gate to go to remote parking capability. 15, Not have a A380 land the same distance as an A321 16, Ability to taxi an aircraft to a holding point for a runway, or just a holding point to make room for other a/c.

Still finding errors like this in KATL, ATL, BOS, M90, DL, 104, 12:00, 09:03, 1, DL ATL, BOS, M90, DL, 104, 12:00, 09:16, 1, DL It caused the aircraft symbol to flicker when selected, so I knew what was causing it. I deleted the first aircraft and the second one below it was able to accept commands.

That's just totally lazy programming. I know how banks of text can be a bit of an eyesore over time, but they are getting paid to write this stuff! They are relying on us users to correct their errors. Lazy, Lazy, Lazy. Have they not heard of checking this stuff before release???

I think the reference is to large aircraft parking in gates too small for them and wings overlapping each other. I would love to be able to assign gates as size specific so that only small aircraft park at small gates etc.....

Bug 1. After pushback, if you just give a continue taxi to RWY 26L it's works fine, but if you issue specific taxiways to use to get to 26L, then it acts as you described! Bug 2. I have also seen this at this airport, I think it may be something to do with the holding points for Bravo, maybe. Bug 3. Also seen this too, using Real Traffic * One further point to add, at the real airport traffic heading for 26L do not routinely use taxiway Juliet east of November, due to 777's and 747's chopping tails off parked aircraft. They either use Zulu or AN/AS to get there, but T3D's automatic routing is down Juliet for aircraft coming from the West side of November.

So, does that mean that the auto fast forward isn't working on KSAN? Maybe you could restrict the time selection to the operational hours of the airport to stop this error? Cheers Gunu

Ok, this is interesting. I just been doing some testing, trying to start KSAN. I tried starting with different runways selected. Wont load. I tried starting with both runways selected. Wont load. I moved the time from midnight to 4am, and lo and behold it started! Maybe a bug? I wont charge you much for my services! ;-p Cheers Gunu

Bought the Deluxe version of Pro on Steam, which adds New York and San Diego six days ago, used San Diego once and now when I load it up it just sits loading at 99 percent. All other airports are working! Any ideas?I have verified my files on Steam and all is good. When I select San Diego and click Start, it loads to 99% then just sit there for ages spinning the triangle and not starting. I've attached the game log file as advised by feelthere. Well, I DID try to upload but it wont do it for some reason so here is the log file text too! Cheers. Initialize engine version: 5.4.4f1 (5a3967d8c55d) GfxDevice: creating device client; threaded=1 Direct3D: Version: Direct3D 11.0 [level 11.0] Renderer: NVIDIA GeForce GTX 760 Ti OEM (ID=0x1189) Vendor: NVIDIA VRAM: 2017 MB Begin MonoManager ReloadAssembly Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\UnityEngine.dll (this message is harmless) Loading C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\UnityEngine.dll into Unity Child Domain Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\Assembly-CSharp-firstpass.dll (this message is harmless) Loading C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\Assembly-CSharp-firstpass.dll into Unity Child Domain Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\Assembly-CSharp.dll (this message is harmless) Loading C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\Assembly-CSharp.dll into Unity Child Domain Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\Assembly-UnityScript.dll (this message is harmless) Loading C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\Assembly-UnityScript.dll into Unity Child Domain Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\UnityEngine.UI.dll (this message is harmless) Loading C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\UnityEngine.UI.dll into Unity Child Domain Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\UnityEngine.Networking.dll (this message is harmless) Loading C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\UnityEngine.Networking.dll into Unity Child Domain - Completed reload, in 0.156 seconds Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\System.Core.dll (this message is harmless) Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\System.dll (this message is harmless) <RI> Initializing input. <RI> Input initialized. desktop: 1920x1200 59Hz; virtual: 1920x1200 at 0,0 <RI> Initialized touch support. UnloadTime: 1.045384 ms STEAM: INIT API : True (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Setting up 3 worker threads for Enlighten. GfxDevice: creating device client; threaded=1 Thread -> id: 3b2c -> priority: 1 Thread -> id: 3b30 -> priority: 1 Thread -> id: 3b34 -> priority: 1 Unloading 6 Unused Serialized files (Serialized files now loaded: 0) UnloadTime: 0.404480 ms readed prefs: fullscreen=False vsync=False (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Monitors found: 1 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Unloading 5 unused Assets to reduce memory usage. Loaded Objects now: 3674. Total: 1.659484 ms (FindLiveObjects: 0.136131 ms CreateObjectMapping: 0.095473 ms MarkObjects: 1.416434 ms DeleteObjects: 0.010842 ms) Load monitor settings: 1920x1200 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Unloading 0 Unused Serialized files (Serialized files now loaded: 0) Unloading 0 unused Assets to reduce memory usage. Loaded Objects now: 3675. Total: 1.548651 ms (FindLiveObjects: 0.131915 ms CreateObjectMapping: 0.087040 ms MarkObjects: 1.324877 ms DeleteObjects: 0.004216 ms) Unloading 4 Unused Serialized files (Serialized files now loaded: 0) UnloadTime: 0.558683 ms Menu Airport Awake ASM: get all paths from: ./Extensions/Airfields/ (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM: getall found: KJFK (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM: getall found: KSAN (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) extension found: KJFK ASM: load asset: ./Extensions/Airfields/KJFK/kjfk_menu (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Parent of RectTransform is being set with parent property. Consider using the SetParent method instead, with the worldPositionStays argument set to false. This will retain local orientation and scale rather than world orientation and scale, which can prevent common UI scaling issues. (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) extension found: KSAN ASM: load asset: ./Extensions/Airfields/KSAN/ksan_menu (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Parent of RectTransform is being set with parent property. Consider using the SetParent method instead, with the worldPositionStays argument set to false. This will retain local orientation and scale rather than world orientation and scale, which can prevent common UI scaling issues. (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) OnEnable!!!!! Runways found: 28 OnEnable!!!!! Runways found: 28 Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\System.Configuration.dll (this message is harmless) Platform assembly: C:\Program Files (x86)\Steam\SteamApps\common\Tower 3D Pro\tower3d_Data\Managed\System.Xml.dll (this message is harmless) SERVER ACCEPTING NEW CLIENTS Unloading 155 unused Assets to reduce memory usage. Loaded Objects now: 6747. Total: 3.647854 ms (FindLiveObjects: 0.285214 ms CreateObjectMapping: 0.165948 ms MarkObjects: 3.150912 ms DeleteObjects: 0.044574 ms) BUILD VERSION: v1.1.83.1304 SP1a Received stats and achievements from Steam Gicon found: award_100_landings icon found: 64x64 Gicon found: award_250_landings icon found: 64x64 Gicon found: award_500_landings icon found: 64x64 Gicon found: award_100_takeoffs icon found: 64x64 Gicon found: award_250_takeoffs icon found: 64x64 Gicon found: award_500_takeoffs icon found: 64x64 Gicon found: award_10_hours icon found: 64x64 Gicon found: award_100_hours icon found: 64x64 Gicon found: award_250_hours icon found: 64x64 GfxDevice: creating device client; threaded=1 start speech! Record error state: False SPEAK: Start speak plugin (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 ASM: load asset: Extensions/Airfields/KSAN/KSAN_databases (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM: load asset: Extensions/Airfields/KSAN/KSAN_airfield (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Unloading 2 Unused Serialized files (Serialized files now loaded: 5) UnloadTime: 28.451275 ms Airplane tex extensions not found. Airplane tex extensions not found. Insert standard airplane tex: AJT0_an Insert standard airplane tex: AJT0_bl Insert standard airplane tex: AJT0_bv Insert standard airplane tex: AJT0_cb Insert standard airplane tex: AJT0_dn Insert standard airplane tex: AJT0_ef Insert standard airplane tex: AJT0_ft Insert standard airplane tex: AJT0_lw Insert standard airplane tex: AJT0_mr Insert standard airplane tex: AJT0_pv Insert standard airplane tex: AJT0_rn Insert standard airplane tex: AJT0_ta Insert standard airplane tex: AJT0_tg Insert standard airplane tex: AJT0_uu Insert standard airplane tex: AJT0_vl Insert standard airplane tex: BTRP_an Insert standard airplane tex: BTRP_bl Insert standard airplane tex: BTRP_bv Insert standard airplane tex: BTRP_cb Insert standard airplane tex: BTRP_dn Insert standard airplane tex: BTRP_ef Insert standard airplane tex: BTRP_ft Insert standard airplane tex: BTRP_lw Insert standard airplane tex: BTRP_mr Insert standard airplane tex: BTRP_pv Insert standard airplane tex: BTRP_rn Insert standard airplane tex: BTRP_ta Insert standard airplane tex: BTRP_tg Insert standard airplane tex: BTRP_uu Insert standard airplane tex: BTRP_vl Insert standard airplane tex: DPRP_an Insert standard airplane tex: DPRP_bl Insert standard airplane tex: DPRP_bv Insert standard airplane tex: DPRP_cb Insert standard airplane tex: DPRP_dn Insert standard airplane tex: DPRP_ef Insert standard airplane tex: DPRP_ft Insert standard airplane tex: DPRP_lw Insert standard airplane tex: DPRP_mr Insert standard airplane tex: DPRP_pv Insert standard airplane tex: DPRP_rn Insert standard airplane tex: DPRP_ta Insert standard airplane tex: DPRP_tg Insert standard airplane tex: DPRP_uu Insert standard airplane tex: DPRP_vl Insert standard airplane tex: EJT1_an Insert standard airplane tex: EJT1_bl Insert standard airplane tex: EJT1_bv Insert standard airplane tex: EJT1_cb Insert standard airplane tex: EJT1_dn Insert standard airplane tex: EJT1_ef Insert standard airplane tex: EJT1_ft Insert standard airplane tex: EJT1_lw Insert standard airplane tex: EJT1_mr Insert standard airplane tex: EJT1_pv Insert standard airplane tex: EJT1_rn Insert standard airplane tex: EJT1_ta Insert standard airplane tex: EJT1_tg Insert standard airplane tex: EJT1_uu Insert standard airplane tex: EJT1_vl Insert standard airplane tex: FRJ1_an Insert standard airplane tex: FRJ1_bl Insert standard airplane tex: FRJ1_bv Insert standard airplane tex: FRJ1_cb Insert standard airplane tex: FRJ1_dn Insert standard airplane tex: FRJ1_ef Insert standard airplane tex: FRJ1_ft Insert standard airplane tex: FRJ1_lw Insert standard airplane tex: FRJ1_mr Insert standard airplane tex: FRJ1_pv Insert standard airplane tex: FRJ1_rn Insert standard airplane tex: FRJ1_ta Insert standard airplane tex: FRJ1_tg Insert standard airplane tex: FRJ1_uu Insert standard airplane tex: FRJ1_vl Unloading 100 unused Assets to reduce memory usage. Loaded Objects now: 10001. Total: 5.748261 ms (FindLiveObjects: 0.270758 ms CreateObjectMapping: 0.157816 ms MarkObjects: 2.749443 ms DeleteObjects: 2.569641 ms) GUI LAYER ID: 5 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 Controller position: OWNER_BOTH (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Search external data: Extensions/Airfields/KSAN/ksan_airplanes.txt Add APTYPE: AJT0.JT0.Widebody Default Jet.WIDE BODY JET - decoded classname: WIDE_BODY_JET Add APTYPE: BTRP.TRP.Tuboprop.TURBOPROP - decoded classname: TURBOPROP Add APTYPE: FRJ1.RJ1.Regional Jet.REGIONAL JET - decoded classname: REGIONAL_JET Add APTYPE: DPRP.PRP.Propeller Airplane.PROP - decoded classname: PROP Add APTYPE: EJT1.JT1.Narrow Body Jet.NARROW BODY JET - decoded classname: NARROW_BODY_JET Search external data: Extensions/Airfields/KSAN/ksan_airlines.txt Search external data: Extensions/Airfields/KSAN/ksan_airports.txt Search external data: Extensions/Airfields/KSAN/ksan_schedule.txt Search external data: Extensions/Airfields/KSAN/ksan_terminal.txt ASM searchtext: assets/prefabs/menu_expansion/kjfk.prefab (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/textures/gui/loading_bg_kjfk.png (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/prefabs/menu_expansion/ksan.prefab (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/textures/gui/loading_bg_ksan.png (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/resources/airfields/ksan.xml (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/resources/airfields/ksan_terminal.txt (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_GA - GA (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_1E - DEN,TAB,VAL (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_1W - DEN,TAB,VAL (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_2E - TAB,VAL,FRT,CBA,DEN,ANG,BTV,BLA (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_2W - TAB,VAL,FRT,CBA,DEN,ANG,BTV,BLA (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_commuter - MAX, (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Add terminal: Terminal_Cargo - EMF (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Load airfield: airfields/ksan ASM searchtext: assets/prefabs/menu_expansion/kjfk.prefab (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/textures/gui/loading_bg_kjfk.png (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/prefabs/menu_expansion/ksan.prefab (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/textures/gui/loading_bg_ksan.png (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) ASM searchtext: assets/resources/airfields/ksan.xml (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: B1_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: D_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: B4_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: B5_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: B6_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: B7_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: B8_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: B9_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: B10_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: C1_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: C2_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: C3_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: C4_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: C5_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) **** Add gate: C6_9,27 (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) Airptype loaded: Default , DEFAULT Airptype loaded: Narrow_default , DEFAULT Airptype loaded: Prop_default , DEFAULT Airptype loaded: Regional_default , DEFAULT Airptype loaded: Turboprop_default , DEFAULT Airptype loaded: Wide_default , DEFAULT Wait for Speech init! IATA: SAN - 85439 Search external data: Extensions/Airfields/KSAN/ksan_gaandlocaltraffic.txt Timetable: 0 Selected weather: sunny -> 4 Terminal: T2_23 maxknot: 23 Terminal: GA2 maxknot: 34 Terminal: GA16 maxknot: 34 Terminal: T2_46 maxknot: 12 Terminal: Cargo5 maxknot: 23 Terminal: TS_2 maxknot: 23 Terminal: TS_1 maxknot: 23 Terminal: TS_9 maxknot: 23 Terminal: T1_9 maxknot: 23 Terminal: TS_6 maxknot: 23 Terminal: GA3 maxknot: 34 Terminal: GA8 maxknot: 34 Terminal: T2_32 maxknot: 23 Terminal: GA13 maxknot: 23 Terminal: T2_43 maxknot: 23 Terminal: GA7 maxknot: 34 Terminal: TS_5 maxknot: 23 Terminal: T2_26 maxknot: 23 Terminal: T2_44 maxknot: 23 Terminal: GA11 maxknot: 23 Terminal: GA15 maxknot: 34 Terminal: T1_6 maxknot: 23 Terminal: T1_1 maxknot: 12 Terminal: T2_22 maxknot: 23 Terminal: T2_31 maxknot: 34 Terminal: TS_4 maxknot: 23 Terminal: T1_18 maxknot: 34 Terminal: GA6 maxknot: 34 Terminal: T2_28 maxknot: 12 Terminal: T1_15 maxknot: 34 Terminal: T2_48 maxknot: 23 Terminal: T1_11 maxknot: 23 Terminal: GA9 maxknot: 34 Terminal: T2_36 maxknot: 23 Terminal: T2_21 maxknot: 23 Terminal: T2_37 maxknot: 34 Terminal: T1_13 maxknot: 23 Terminal: Cargo1 maxknot: 23 Terminal: T2_51 maxknot: 23 Terminal: T2_39 maxknot: 23 Terminal: GA17 maxknot: 23 Terminal: T2_24 maxknot: 23 Terminal: T2_29 maxknot: 23 Terminal: Cargo6 maxknot: 23 Terminal: GA20 maxknot: 34 Terminal: T2_25 maxknot: 23 Terminal: GA1 maxknot: 23 Terminal: Cargo2 maxknot: 23 Terminal: GA4 maxknot: 34 Terminal: T1_14 maxknot: 23 Terminal: T1_12 maxknot: 23 Terminal: TS_7 maxknot: 23 Terminal: TS_3 maxknot: 34 Terminal: T1_19 maxknot: 34 Terminal: T1_1A maxknot: 12 Terminal: T1_16 maxknot: 23 Terminal: T2_47 maxknot: 23 Terminal: T2_50 maxknot: 23 Terminal: T2_35 maxknot: 23 Terminal: T2_40 maxknot: 23 Terminal: T2_45 maxknot: 12 Terminal: T1_17 maxknot: 23 Terminal: T2_30 maxknot: 23 Terminal: T2_33 maxknot: 23 Terminal: T1_10 maxknot: 23 Terminal: T1_8 maxknot: 23 Terminal: GA10 maxknot: 34 Terminal: GA14 maxknot: 34 Terminal: T2_34 maxknot: 23 Terminal: TS_8 maxknot: 23 Terminal: T1_7 maxknot: 34 Terminal: GA19 maxknot: 34 Terminal: T1_4 maxknot: 23 Terminal: GA5 maxknot: 34 Terminal: Cargo4 maxknot: 23 Terminal: Cargo3 maxknot: 23 Terminal: T2_27 maxknot: 23 Terminal: T2_49 maxknot: 23 Terminal: T2_41 maxknot: 34 Terminal: T2_42 maxknot: 34 Terminal: T1_2 maxknot: 23 Terminal: GA18 maxknot: 34 Terminal: T1_5 maxknot: 23 Terminal: T2_38 maxknot: 23 Terminal: GA12 maxknot: 34 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 start speech! Record error state: False speech db lengths: 12952 / 23 / 306 / 0 / 2564 speech airplanes: GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 SPEAK: Start speak plugin (Filename: C:/buildslave/unity/build/artifacts/generated/common/runtime/UnityEngineDebugBindings.gen.cpp Line: 42) GfxDevice: creating device client; threaded=1 RunwayToggled: 9 Clear allowed runways Add allowed runway: 9 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1 GfxDevice: creating device client; threaded=1

Ok, got it sorted. Here is another pic. That definitely relates to it! G

How do I add another image? It says I only have 1.71kb left