FeelThere_Vic Posted May 12, 2017 Report Share Posted May 12, 2017 Dear Folks, The SP2 for T!3D Pro is released and is available on the same download link you received during purchase. Also as we promised it is available on Steam at the same time (now). Here are the list of fixes: -the most important thing is we found a way to further optimize and you should see some considerably better performance (fps) -the readback (and handling heading) for numbers under 100 had some problem so it's fixed now -pink menu for DX9. It should be fixed -GA traffic now will arrive -local traffic will work and will perform it's task without freezing mid air -strips for the local traffic will be removed once the plane lands -we added more variants for the wind -fixed the wind direction at KLAX -if you have a mid -air you will be penalized only once -at certain condition pilots were able to crash each other during taxi. Should be OK now -in multiplayer if you used the mouse to click on the Command Panel, the commands disappeared on the host computer once the client issued a command. Fixed Please let's keep this post clean, this is an announcement topic, not a wishlist. Any inappropriate comments will be removed without notice. Thank you Vic Link to comment Share on other sites More sharing options...
Fredbird7428 Posted May 25, 2017 Report Share Posted May 25, 2017 If I no longer have the original download link or email from when I purchased Tower!3D Pro, is there anyway to still download the SP? Link to comment Share on other sites More sharing options...
scoobflight Posted May 25, 2017 Report Share Posted May 25, 2017 4 hours ago, Fredbird7428 said: If I no longer have the original download link or email from when I purchased Tower!3D Pro, is there anyway to still download the SP? if you did purchase from feelThere, you need to contact BMTmicro with purchase information (date, creditcard, email address) - call 800-414-4268 (USA/Canada) / +1 910-792-9100 (international customers). once you collect your installer burn it to a disk and write the key-code on the disk (top, not the 'read side'). Link to comment Share on other sites More sharing options...
CL30 Posted June 4, 2017 Report Share Posted June 4, 2017 I just purchased T3DPro on May 31st and did not see a link to SP 2 in the downloads email. Is SP 2 now part of the full download of T3DPro? Thanks! Link to comment Share on other sites More sharing options...
Avwriter Posted June 5, 2017 Report Share Posted June 5, 2017 Yes. FeelThere does not generally issue SPs as separate downloads. Each time one is released, one must redownload the game from the original link provided at the time of purchase and either install it on top of the already installed version (usually works fine), or do a full uninstall reinstall (as recommended by Feel There. Andrew Link to comment Share on other sites More sharing options...
CL30 Posted June 5, 2017 Report Share Posted June 5, 2017 Great, thanks! Link to comment Share on other sites More sharing options...
benny1263 Posted July 22, 2017 Report Share Posted July 22, 2017 Would I be able to get this SP2 update if I had bought the game from Amazon? https://www.amazon.com/dp/B072MN76DX/ref=cm_sw_r_cp_dp_T1_qVPCzbGRHK8NK Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted July 22, 2017 Author Report Share Posted July 22, 2017 Yes. Link to comment Share on other sites More sharing options...
andrew777 Posted August 8, 2017 Report Share Posted August 8, 2017 Hi, Great program and good to play! Just some feedback/question what i discovered with the install. As I know that the program requires 64 bit it doesn't check this on forehand, only with starting the program. Install within windows 7 or windows 10, the installer doesn't create start item, only a "remove program" option. For Starting program you have to go to the install folder As it requires a 64 bit OS, why is the install of the software of FeelThere being placed in the 32 bit install folder of windows (Program Files (x86))? My2cts... Link to comment Share on other sites More sharing options...
Pedantic G Posted November 11, 2017 Report Share Posted November 11, 2017 Hi Vic, Quick question. I am just about to purchase Tower 3d Pro from Steam for a new PC I have. WIll I need to download this patch once purchased or is the main game now updated following this patch? Thanks G Link to comment Share on other sites More sharing options...
lgvdbroek Posted November 12, 2017 Report Share Posted November 12, 2017 (edited) If you purchased this game on Steam, is it nessesary to download these Servicepacks ? Or are the steamversions already updated ? Leo, Rotterdam. The Netherlands Edited November 13, 2017 by lgvdbroek Link to comment Share on other sites More sharing options...
FeelThere_Vic Posted November 13, 2017 Author Report Share Posted November 13, 2017 Steam always have the latest version. We update Tower!3D Pro on all of our platforms at the same time. Link to comment Share on other sites More sharing options...
Pedantic G Posted November 13, 2017 Report Share Posted November 13, 2017 Many thanks. Have decided to purchase direct from you guys (plus the various add ons) once the PC turns up later this week. Gazza Link to comment Share on other sites More sharing options...
acryingirl Posted January 30, 2018 Report Share Posted January 30, 2018 Is this update Top Secret? Why not add a link . Link to comment Share on other sites More sharing options...
scoobflight Posted January 30, 2018 Report Share Posted January 30, 2018 1 minute ago, acryingirl said: Is this update Top Secret? Why not add a link . If you purchased the game from feelThere the link is the same as you received for your original download. Link to comment Share on other sites More sharing options...
acryingirl Posted January 30, 2018 Report Share Posted January 30, 2018 That was a few months ago, could you tell me were the link is? Thanks Link to comment Share on other sites More sharing options...
scoobflight Posted January 31, 2018 Report Share Posted January 31, 2018 4 hours ago, acryingirl said: That was a few months ago, could you tell me were the link is? Thanks you received an email with the link. check your old emails. Link to comment Share on other sites More sharing options...
acryingirl Posted January 31, 2018 Report Share Posted January 31, 2018 Bought the game, some add on's etc. Some time I would like to move on to a new airport and such, but not having the game work as it should, I cant justify it now. Searched Feel there webpage for some time and still cant find sp2. could you send me the link. Thanks! Link to comment Share on other sites More sharing options...
winsaudi Posted February 1, 2018 Report Share Posted February 1, 2018 acryingirl, A couple of points: 1) SP2 was released in May of last year, and has been superseded, the current version is SP31d; 2) you will not find any links to SPs on this forum, you need to re-download with the links sent to you when you purchased T3D and each add-on. So, depending on when you downloaded the main installation program, you may already have the latest version. Link to comment Share on other sites More sharing options...
lgvdbroek Posted February 1, 2018 Report Share Posted February 1, 2018 Thats the benefit of a purchase on Steam. You have always the latest version of your software. maybe worth considering next time............. Link to comment Share on other sites More sharing options...
acryingirl Posted February 1, 2018 Report Share Posted February 1, 2018 If you don't save every email your not going to find the link to sp3 ( my mistake! ). In other sims like il 2 or others they just post it. this game has a lot of potential, once the bug are out. at the end of the I have not bought any more add ons . Thanks ! Link to comment Share on other sites More sharing options...
bill_3810 Posted February 26, 2018 Report Share Posted February 26, 2018 Trying to update SP3d and i downloaded from the original link in my email but the registration code doesn't work. the next button will not enable.???????? Disregard: Brain Cramp Link to comment Share on other sites More sharing options...
bill_3810 Posted February 26, 2018 Report Share Posted February 26, 2018 Ok here is something very interesting. As I understand it to install the Service Packs you just download the original file again which i did. Now every time anyone speaks or i press the transmit button i hear "Blah Blah Blah blah blah blah blah" Also it's not creating desktop icons or any program menu icons. Any ideas? Link to comment Share on other sites More sharing options...
malbarda Posted March 26, 2018 Report Share Posted March 26, 2018 Hi - tried to find the service pack download on the website and I do not see it. Where do I get the service pack? Thanks! Link to comment Share on other sites More sharing options...
freson Posted March 26, 2018 Report Share Posted March 26, 2018 (edited) copied from the FeelThere newsletter: ATCSuite.com and FeelThere.com customers can receive this new SP by re-downloading the updated product from the same link they got during purchase. Steam customers can update it through Steam and 3rd party customers should contact their resellers for the update. Edited March 26, 2018 by freson Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now