crbascott Posted May 28, 2017 Report Share Posted May 28, 2017 With RT and RC you have to be real careful on where you install your files. The default folders the install programs provides are quite often incorrect. To verify that your installs worked correctly, how many files do you see in your [3D Pro root]\Extensions\Airfields\KATL folder? You should probably see at least 12 files with katl_schedule.txt being the file that contains the real traffic schedule for KATL If you open that text file, the first record is a Delta flight 2650 - an M88. If you don't have 12 files or you don't see the schedule file or flight then there is an issue with your RT install. Also, what do you see in your [3D Pro root]\Extensions\Airplanes\Texturepacks folder? Do you have any files beginning with airplanes_texpackX where X is the number 6 or greater? If not, you have issues with your RC install. Note: More than likely KATL is 6 but since I haven't purchased RC for KATL I don't know for sure. Craig PS - Just to be clear the [3D Pro root] is the folder where tower3D.exe exists and you should also see the following folders: Extensions, mmwindow, and tower3d_Data. Link to comment Share on other sites More sharing options...
Avwriter Posted May 28, 2017 Report Share Posted May 28, 2017 3 minutes ago, crbascott said: With RT and RC you have to be real careful on where you install your files. The default folders the install programs provides are quite often incorrect. To verify that your installs worked correctly, how many files do you see in your [3D Pro root]\Extensions\Airfields\KATL folder? You should probably see at least 12 files with katl_schedule.txt being the file that contains the real traffic schedule for KATL If you open that text file, the first record is a Delta flight 2650 - an M88. If you don't have 12 files or you don't see the schedule file or flight then there is an issue with your RT install. Also, what do you see in your [3D Pro root]\Extensions\Airplanes\Texturepacks folder? Do you have any files beginning with airplanes_texpackX where X is the number 6 or greater? If not, you have issues with your RC install. Note: More than likely KATL is 6 but since I haven't purchased RC for KATL I don't know for sure. Craig PS - Just to be clear the [3D Pro root] is the folder where tower3D.exe exists and you should also see the following folders: Extensions, mmwindow, and tower3d_Data. Just checked. KATL texture pack is 7. Andrew Link to comment Share on other sites More sharing options...
crbascott Posted May 28, 2017 Report Share Posted May 28, 2017 Hmmm - is KBOS or KLAS number 6? Or is Vic going to lay a surprise on us? :) Interestingly, the KATL schedule file is dated 10/9/2016 so that tells me (1) some of the airports have been in the works for a while and (2) that the KATL schedule isn't as fresh as I had hoped. Link to comment Share on other sites More sharing options...
GKibby Posted May 28, 2017 Author Report Share Posted May 28, 2017 I can appreciate all the comments on Real Traffic and Real Color. I guess I approach the game differently. I normally play with RT and RC and a Schedule Creator schedule so I can make the session as challenging (or not) as I want. I enjoy playing with real airline names and the actual liveries as they add to the realism. RT is updated for each new airport at no extra charge. RC is less than $8 no matter how many new liveries are included. With the new airports priced at $20, I get each new airport with updated RT and new planes in RC for less than $30. I consider that the price of a new airport that I can play the way I enjoy most. 1 Link to comment Share on other sites More sharing options...
crbascott Posted June 3, 2017 Report Share Posted June 3, 2017 On 5/27/2017 at 9:04 PM, Bill Smith said: Yes I have RT/RC working on other airports KATL was running normally with fake airlines and fake liveries I bought Tower3D Pro from Feelthere website Thanks Bill Bill, I was curious. Were you ever able to get KATL up and running with RT/RC? Link to comment Share on other sites More sharing options...
Bill Smith Posted June 3, 2017 Report Share Posted June 3, 2017 No did not Link to comment Share on other sites More sharing options...
crbascott Posted June 3, 2017 Report Share Posted June 3, 2017 On 5/27/2017 at 10:04 PM, crbascott said: With RT and RC you have to be real careful on where you install your files. The default folders the install programs provides are quite often incorrect. To verify that your installs worked correctly, how many files do you see in your [3D Pro root]\Extensions\Airfields\KATL folder? You should probably see at least 12 files with katl_schedule.txt being the file that contains the real traffic schedule for KATL If you open that text file, the first record is a Delta flight 2650 - an M88. If you don't have 12 files or you don't see the schedule file or flight then there is an issue with your RT install. Also, what do you see in your [3D Pro root]\Extensions\Airplanes\Texturepacks folder? Do you have any files beginning with airplanes_texpackX where X is the number 6 or greater? If not, you have issues with your RC install. Note: More than likely KATL is 6 but since I haven't purchased RC for KATL I don't know for sure. Craig PS - Just to be clear the [3D Pro root] is the folder where tower3D.exe exists and you should also see the following folders: Extensions, mmwindow, and tower3d_Data. Did you see this post? This might help figure out where your problem resides. Thanks, Craig Link to comment Share on other sites More sharing options...
Bill Smith Posted June 3, 2017 Report Share Posted June 3, 2017 Yes I saw the post and yes it looks like I have some files missing, maybe I am confused as to which directories to point the installers too. If i uninstall KATL and RC for KATL which directories should I point the installers to. Also do I install RT_ Tower3D Pro sp3 before or after I do a re-install of RC-KATL and KATL. Thanks Bill Link to comment Share on other sites More sharing options...
crbascott Posted June 3, 2017 Report Share Posted June 3, 2017 I believe the recommended order is the airport add-on first, then the RTupdate, and finally install the RC add-on. For the airport and RT add-on, it needs to be installed in the root folder. Mine is C:\Program Files (x86)\FeelThere\Tower!3D Pro. For RC, it is looking for the texture packs folder under the root. Mine is C:\Program Files (x86)\FeelThere\Tower!3D Pro\Extensions\Airplanes\Texturepacks. In all cases, when running the install program it will come up with a default installation location. You can click the square to the right with 3 dots to find and change it to the correct location on your system. Sadly, this is so much harder than it needs to be.Good luck! Craig Link to comment Share on other sites More sharing options...
Bill Smith Posted June 3, 2017 Report Share Posted June 3, 2017 Ok I will give that a try Thanks Bill Link to comment Share on other sites More sharing options...
Bill Smith Posted June 4, 2017 Report Share Posted June 4, 2017 OOPS intended to uninstall KATL and KATL RC only for some reason all of Tower3D Pro got uninstalled to. Ah well back to the drawing board. Bill Link to comment Share on other sites More sharing options...
TomoT Posted August 29, 2017 Report Share Posted August 29, 2017 Hi, i have a problem with the RC Add-Ons. I bought the Steam Pro-Version (with SP2). Then i bought RT and RC directly from ATCsuite.com. Download worked well. Installation of RT works also. I get the real names of airlines und aircraft types. But i can`t install the RCs. All my liveries are white. As I see, I should have an extra Texture folder. But there isn`t one in S:\Steam\steamapps\common\Tower 3D Pro\Extensions\Airplanes The RT i installed into S:\Steam\steamapps\common\Tower 3D Pro Must I create the folder by myself? Thanks for help in advance! Tom Link to comment Share on other sites More sharing options...
futureboy Posted August 29, 2017 Report Share Posted August 29, 2017 Take a look around your drives to make sure it did not accidentally go into C: Drive or the Program Files (x86) Do a search on you S: and C: drives for Texturepacks to see if it accidentally placed the files in the incorrect location. You can also try the installation again, if you do not mind extra files laying around. RickyJ Link to comment Share on other sites More sharing options...
Fizziii Posted August 29, 2017 Report Share Posted August 29, 2017 Tom, If you just recently bought the RT/RC, the installer should have an option specifically for Steam installations. Did you get that dialog? Best regards, Fizziii Link to comment Share on other sites More sharing options...
crbascott Posted August 29, 2017 Report Share Posted August 29, 2017 5 hours ago, Fizziii said: Tom, If you just recently bought the RT/RC, the installer should have an option specifically for Steam installations. Did you get that dialog? Best regards, Fizziii Yep, but it is probably defaulting to the C: drive and Tom is using the S: drive. Link to comment Share on other sites More sharing options...
TomoT Posted August 29, 2017 Report Share Posted August 29, 2017 (edited) 7 hours ago, futureboy said: Take a look around your drives to make sure it did not accidentally go into C: Drive or the Program Files (x86) Do a search on you S: and C: drives for Texturepacks to see if it accidentally placed the files in the incorrect location. You can also try the installation again, if you do not mind extra files laying around. RickyJ Hi Ricky, no Texturepacks found, neither on C: nor on S: drives. I have a standalone HDD for Steam. Also installed RC again, but nothing has changed. 6 hours ago, Fizziii said: Tom, If you just recently bought the RT/RC, the installer should have an option specifically for Steam installations. Did you get that dialog? Best regards, Fizziii Hi Fizziii, yes the installer asked me of my version and I tagged the "Steam Pro Version" Button for RT as well as for RC. And I changed the path to my S: Drive Steamapps Folder for Tower 3D Pro. I created a Texturepacks Folder manually and now the liveries not white at all. But I think it is not correct so far (see pic) In the Texturepacks folder I have: airplanes_texpack7 airplanes_texpack7.manifest Uninstal Only RC KATL so far Thanks a lot Tom Edited August 29, 2017 by TomoT Link to comment Share on other sites More sharing options...
nyergesdesign Posted August 30, 2017 Report Share Posted August 30, 2017 Dear Tom, please send your game.log for our contact e-mail address. info@nyergesdesign.com Best regards, Gabor Link to comment Share on other sites More sharing options...
TomoT Posted August 30, 2017 Report Share Posted August 30, 2017 6 hours ago, nyergesdesign said: Dear Tom, please send your game.log for our contact e-mail address. info@nyergesdesign.com Best regards, Gabor Hi Gabor, where do I find the game.log file? Sorry... Tom Link to comment Share on other sites More sharing options...
nyergesdesign Posted August 30, 2017 Report Share Posted August 30, 2017 9 minutes ago, TomoT said: Hi Gabor, where do I find the game.log file? Sorry... Tom In the Tower folder. Link to comment Share on other sites More sharing options...
TomoT Posted August 30, 2017 Report Share Posted August 30, 2017 (edited) Hi @nyergesdesign there is no game.log Screenshot (could not upload here) Within the "Tower3D_Data" Folder is an "output_log" file. Does it help? Many thanks Tom Edited August 31, 2017 by TomoT Link to comment Share on other sites More sharing options...
Kl408 Posted August 31, 2017 Report Share Posted August 31, 2017 Tom, You need to start the game with the tower3D.bat file.... That will create the game.log they need... Grtz Willem 1 1 Link to comment Share on other sites More sharing options...
nyergesdesign Posted August 31, 2017 Report Share Posted August 31, 2017 14 hours ago, TomoT said: Hi @nyergesdesign there is no game.log Screenshot (could not upload here) Within the "Tower3D_Data" Folder is an "output_log" file. Does it help? Many thanks Tom Dear Tom, please do what Willam suggested. Please send game.log to our e-mail address. info@nyergesdesign.com Thank you, Gabor Link to comment Share on other sites More sharing options...
TomoT Posted August 31, 2017 Report Share Posted August 31, 2017 Thank you, Willem. @nyergesdesign i sent the email. Thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now