Braf123456 Posted August 6, 2019 Report Share Posted August 6, 2019 I'm sorry for the problems I will replace the schedule an terminal files when I figure out what the problem is sorry Link to comment Share on other sites More sharing options...
DULEPA Posted August 7, 2019 Report Share Posted August 7, 2019 Hello. For my part the loading this blocks to 63% ... Link to comment Share on other sites More sharing options...
cwalfy1 Posted August 7, 2019 Report Share Posted August 7, 2019 8 minutes ago, DULEPA said: Hello. For my part the loading this blocks to 63% ... The same here. Went back and put in the original files and everything runs great. Link to comment Share on other sites More sharing options...
Braf123456 Posted August 7, 2019 Author Report Share Posted August 7, 2019 58 minutes ago, cwalfy1 said: The same here. Went back and put in the original files and everything runs great. Ok I will look at it AN THE PROBLEM WAS I PUT 78X INSTEAD OF 781 I FIXED NOW TRY IT 1 Link to comment Share on other sites More sharing options...
DULEPA Posted August 9, 2019 Report Share Posted August 9, 2019 I downloaded the new files and same result, loading blocked at 63% Link to comment Share on other sites More sharing options...
Braf123456 Posted August 9, 2019 Author Report Share Posted August 9, 2019 1 hour ago, DULEPA said: I downloaded the new files and same result, loading blocked at 63% I fixed the schedule redownload the schedule an it should work Link to comment Share on other sites More sharing options...
DULEPA Posted August 9, 2019 Report Share Posted August 9, 2019 Hello. Always the same result, the load is locked at 63% even after 5 minutes of loading. Link to comment Share on other sites More sharing options...
hexzed Posted August 9, 2019 Report Share Posted August 9, 2019 Do you have the latest Real traffic? Link to comment Share on other sites More sharing options...
cwalfy1 Posted August 9, 2019 Report Share Posted August 9, 2019 9 minutes ago, hexzed said: Do you have the latest Real traffic? The same here and I updated everything this morning when the EDDM Sp came out. Link to comment Share on other sites More sharing options...
Braf123456 Posted August 9, 2019 Author Report Share Posted August 9, 2019 4 hours ago, cwalfy1 said: The same here and I updated everything this morning when the EDDM Sp came out. The schedule should work Link to comment Share on other sites More sharing options...
hexzed Posted August 9, 2019 Report Share Posted August 9, 2019 If you can attach your game log, we can take a look Link to comment Share on other sites More sharing options...
Braf123456 Posted August 9, 2019 Author Report Share Posted August 9, 2019 I think it was my fault I put in the wrong airplane for the 781 I put 78x Link to comment Share on other sites More sharing options...
crbascott Posted August 10, 2019 Report Share Posted August 10, 2019 Another reason why in the next version FT/ND should not intermingle the use of ICAO codes and IATA codes. In the case of the Boeing 787-10, the IATA code should have actually been 78J and not 781. But Real Traffic has never been perfect. 1 Link to comment Share on other sites More sharing options...
Braf123456 Posted August 10, 2019 Author Report Share Posted August 10, 2019 10 minutes ago, crbascott said: Another reason why in the next version FT/ND should not intermingle the use of ICAO codes and IATA codes. In the case of the Boeing 787-10, the IATA code should have actually been 78J and not 781. But Real Traffic has never been perfect. I thought it would 78x that's cool it's 78j u learn something new every day Link to comment Share on other sites More sharing options...
danilars Posted August 10, 2019 Report Share Posted August 10, 2019 (edited) So I have the same problem that stands at 63% loading the program. Everything is up to date but it does not go on. Did I understand correctly that the files must be renamed before inserting? Also ich habe das selbe problem das bei 63% das laden des programms stehen bleibt. Alles ist aktuaell aber es geht nicht weiter. Habe ich das richtig verstanden das die Dateien umbenennt werden müssen vor dem einfügen? Edited August 10, 2019 by danilars Link to comment Share on other sites More sharing options...
EliGrim Posted August 10, 2019 Report Share Posted August 10, 2019 I can't check it right now, but I'm very sure that the ICAO code is used in the file structure for CDG. Therefore, the files would most likely have to be renamed to: lfpg_terminal.txt lfpg_airlines.txt lfpg_schedule.txt Ich kann es gerade nicht überprüfen, aber ich bin mir sehr sicher, dass der ICAO-Code in der Dateistruktur von CDG verwendet wird. Daher müssten die Dateien höchstwahrscheinlich umbenannt werden. Link to comment Share on other sites More sharing options...
danilars Posted August 10, 2019 Report Share Posted August 10, 2019 22 minutes ago, EliGrim said: I can't check it right now, but I'm very sure that the ICAO code is used in the file structure for CDG. Therefore, the files would most likely have to be renamed to: lfpg_terminal.txt lfpg_airlines.txt lfpg_schedule.txt Ich kann es gerade nicht überprüfen, aber ich bin mir sehr sicher, dass der ICAO-Code in der Dateistruktur von CDG verwendet wird. Daher müssten die Dateien höchstwahrscheinlich umbenannt werden. Well, I did that, but the problem persists gut das habe ich getan, trotzdem besteht das problem weiterhin Link to comment Share on other sites More sharing options...
EliGrim Posted August 10, 2019 Report Share Posted August 10, 2019 7 minutes ago, danilars said: Well, I did that, but the problem persists To narrow down the problem it might be helpful you would attach your log file (output_log.txt - after the error has occurred and you have quit the game) from the ..\tower3d_Data\ folder in this thread. Um der Sache auf den Grund zu gehen, könnte es hilfreich sein, wenn du deine Logdatei (output_log.txt - nachdem der Fehler aufgetreten ist und du das Spiel beendet hast) aus dem Ordner ..\tower3d_Data\ in diesem Thread anhängst. Link to comment Share on other sites More sharing options...
DULEPA Posted August 10, 2019 Report Share Posted August 10, 2019 Hello After a new test, always the same. If it can help here is my log in attachment. https://www.partage-temporaire.fr/2019/08/10/outputlog/ Link to comment Share on other sites More sharing options...
ATC AlaskaGuy Posted August 10, 2019 Report Share Posted August 10, 2019 In tower3D Pro thought it is listed in the manifest file for the sim as B78X but in the actual schedule you put that aircraft it would have to be 781 Link to comment Share on other sites More sharing options...
ATC AlaskaGuy Posted August 10, 2019 Report Share Posted August 10, 2019 Ilgrim this is how my files are for LFPG and mine loads just fine lfpg_airlines.txt lfpg_airplanes.txt lfpg_airports.txt lfpg_terminal.txt lfpg_schedule.txt Link to comment Share on other sites More sharing options...
Braf123456 Posted August 10, 2019 Author Report Share Posted August 10, 2019 3 hours ago, DULEPA said: Hello After a new test, always the same. If it can help here is my log in attachment. https://www.partage-temporaire.fr/2019/08/10/outputlog/ It works for me I changed the mistake it was the 78x to 781 so I don't know what the problem is what hours are you playing Link to comment Share on other sites More sharing options...
cwalfy1 Posted August 10, 2019 Report Share Posted August 10, 2019 6 hours ago, alaskaGuy2018 said: Ilgrim this is how my files are for LFPG and mine loads just fine lfpg_airlines.txt lfpg_airplanes.txt lfpg_airports.txt lfpg_terminal.txt Yours works with no schedule file, that's pretty good. 1 Link to comment Share on other sites More sharing options...
ATC AlaskaGuy Posted August 10, 2019 Report Share Posted August 10, 2019 well I am working on the schedule don't have that completed yet but as soon as I do if you want to see that to I will show you that also Link to comment Share on other sites More sharing options...
ATC AlaskaGuy Posted August 10, 2019 Report Share Posted August 10, 2019 hey also CWALFY1 try these airport schedule and other files in the meantime and see if you can spot the airlines I have added that IRL are not in the airport as they are seasonal or just added for kicks. cyvr_airlines.txt cyvr_airplanes.txt cyvr_airports.txt cyvr_schedule.txt cyvr_terminal.txt ymml_airlines.txt ymml_airplanes.txt ymml_airports.txt ymml_schedule.txt ymml_terminal.txt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now