Thomas Richter

Hi, then that function is available for you, as Pete described above Thomas

Hi, I tested also with ShortNameOK=Yes and that works also correct as described. I.e. when defined only Lockheed it work only with any AC that name starts with Lockheed. Thomas

Hi, that function was a hack into FSX/P3D display system but is not implemented in FSUIPC5, related to a pending solutions of L-M in P3Dv4. Thomas

Hi, you got that very wrong here. There is neither a problem with AutoSave function in FSUIPC4 nor in FSUIPC5, both work perfect correct. The problem is using FSUIPC's AutoSave function when having an PMDG aircraft selected, maybe other Add-on aircrafts are effected as well but PMDG's are best known for that, then a big amount of data is saved by PMDG that might take up to 10 seconds and freezes for that time the FS/P3D completely. The amount of data and which date is controlled by PMDG only and the function that saves it is build into FS/P3D, where FSUIPC4 / FSUIPC5 just calls that function to execute. FSUIPC is NOT involved in what data is saved and can also not change that. You can call that function manually yourself in FS/P3D direct defined, i.e. in P3Dv4 Save Scenario, to a key or button. You will find that you get the same effect, FS/P3D freezes for 5 to seconds completely. Because of that 'Saving Problem', the big amount of date that is saved, you shouldn't use the FSUIPC AutoSave function when flying a i.e. a PMDG aircraft. For any other aircraft, default or Add-on, that doesn't save that big amount of date the AutoSave function doesn't effect the joy of flying at all because the saving takes only a fraction of a second. This is well described in the FSUIPC manuals, located in folder ..\Modules\Documents\ Thomas

Hi, P3Dv4 and in FSUIPC5.ini file ShortAircraftNameOk=Substring Throttle axis assigned to profile Twin Piston [Profile.Twin Piston] 1=Lockheed Electra 10A 2=Beech Baron 58 [Axes.Twin Piston] RangeRepeatRate=10 0=AS,256,F,65697,0,0,0 -{ TO SIM: THROTTLE_SET }- Works correct as it should, any version of that starts with Lockheed Electra 10A and any version of Beech Baron 58 that starts with the corresponding string. If you shorten the strings of the aircraft names to the minimum you want to identify and use then that will work for you as well. Thomas

Hi, I copy Pete's reply in here from a different topic with similar problem. Please run a short session and after fully closed send the FSUIPC5.JoyScan.csv file a copy and paste the full content of your FSUIPC5.ini and FSUIPC5.log file. Thomas

Hi, but you don't give any information! Please run a short session and after fully closed send the FSUIPC5.JoyScan.csv file a copy and paste the full content of your FSUIPC5.ini and FSUIPC5.log file. Thomas

Hi, neither direct but here is a link in User Contributions by using FSUIPC's Lua plugin Pokeys Device Lua Script / External DLL using luacom Thomas

Hi Urs, 1. das Verzeichnis auf dem client PC wo ProSim737 lauft muss fur das Netzwerk freigegeben sein. D.h. dieses ProSim737 Verzeichnis muss auf dem FS-PC gesehen werden wenn du im Explorer (auf FS-PC) auf Netzwerk klickst. 2. wenn das so Ok ist, klick auf den freigegebenen Ordner (ProSim737), das sollte dann alle Files und Ordner in diesem Verzeichnis zeigen. 3. wenn das so Ok ist, wie in deinem ersten bild das die taskleiste des Explorers zeigt, klicke einfach mit der maus in das feld. Die Taskleiste wird jetzt die korrekte Adresse zu diesem Ordner auf dem Client PC anzeigen und zwar komplett wie du sie benotigst fur den FSUIPC5.ini Eintrag. Du kannst die Zeile einfach kopieren, da du dich ja auf dem FS-PC befindest. Alles andere wie Pete bereits gesagt hat, ActiveSky muss naturlich gestartet sein. (mein KeyBoard hat keine Umlaute und ae/ue ... ist zu umstaendlich) Thomas

Hi, you can change the slope curve to your needs for each axis. Thomas

Hi, did you ask maybe first in Flight Keeper forum? Also you can use the whole FSUIPC INI file from FSUIPC4 for FSUIPC5 by just renaming it to FSUIPC5.ini Thomas

Hi, can you please send as well your FSUIPC INI file and FSUIPC log file. Thomas

Hi, as your pic shows you are running an older not supported version of FSUIPC4 (4.966c). The current version 4.968, please update to latest version first. Install_FSUIPC4968.zip Thomas

Hi Urs, the FSUIPC log shows multiple reconnections of devices can it be that there is a USB connection problem/ USB Hub problem or the power saving in Windows is active for USB devices? Thomas

Hi, did you try running without PMDG, any other Add-on will be still active, just to eliminate one after the other? I wouldn't see a restart as a fix because when SimConnect starts stalling it means it is overloaded and cannot deliver anymore what it is ask for. The restart of P3D starts just the situation fresh and SimConnect will get overloaded again after some time ... Thomas

Hi, as a additional note, if you have already a WideFS7 licence for FSUIPC4 (FSX/FSX-SE/P3D) that will work also with FSUIPC5. You would not need to buy another registration key for that. Thomas

Hi, please make sure that Opencockpits yoke and pedals are recognized as game-controller or Joysticks in Windows itself. They might not be those type of controller at all but just HID's and work with OC software only? Also please send your FSUIPC log-file and the FSUIPC4.JoyScan.csv file from Modules folder. Thomas

FSUIPC would only do that when you call process, if it doesn't need to be send anymore it shouldn't be in the process group anymore. Thomas

you write fsuControlDatau = New FSUIPC.Offset(Of Integer)(&H3114, True) No quotation marks for the address, in your case the offset address is seen as a string ... Thomas

if you use both offsets as write only then add the True parameter fsuControlDatau = New FSUIPC.Offset(Of Integer)("&H3114", True) fsuControlu = New FSUIPC.Offset(Of Integer)("&H3110", True) Thomas

Hi, Ai object creation or control is not implemented in FSUIPC, to do this you would have to use SimConnect. I don't know of L:variables for AI objects, as far as I know they are local. Maybe in a shared cockpit but that wouldn't be a AI object. Thomas

Hi, when you check the major difference from 3.xx onwards you will find Paul described that any Offset that Read/Write declared has to be Read first before it can be used for writing. Write only declared Offsets behave different, just writeable. In case you use 0x3110, that is a write only Offset in FSUIPC already, you should declare that Offset as well Write Only. Thomas

Hi, if you check the manual you will find that for PMDG the Option Auto Save should not be used because of the big amount of data PMDG saves that you will get the freezing effect. Just disable in FSUIPC the Auto Save option and you will be fine. Thomas

Hi, as the log shows you have an SimConnect stall, that starts with the start of vPilot. Just try a session without vPilot. 164160 Ready Flags: Ready-To-Fly=Y, In Menu=N, In Dlg=N 164222 ASN active function link set 164222 Ready for ASN WX radar 165361 Weather Read request (Nr Station) to area 5: Lat=51.48, Lon=-0.43, Alt=0.0, Req=1 167046 Deactivated for PID=19132, "vPilot.exe" 167046 Lost focus to PID=19132, "vPilot.exe" 167498 Weather Read request (Global set) to area 1: ICAO="GLOB", Req=0 169854 WX Error: timed out, WX request type 5, Lat=51.4759, Lon=-0.4342, Alt=0.0m Thomas

Hi, the code base for that will not have changed in FSUIPC5 compared to FSUIPC4. Did you try the MyTraffic forum first to make sure there is no change in P3Dv4 with MyTraffic because of AI change in P3Dv4? Thomas