crbascott

You're not understanding - deleting and reinstalling is unnecessary. I can help you via PM or on the Discord server tonight if you'd like.

Wow, that actually works and it seems to load all the RC files. I wasn't brave enough to try it myself. 😏 If you're asking that question you're obviously a little confused. You'll rename airplanes_texpack1 to airplanes_texpack01, airplanes_texpack1.manifest to airplanes_texpack01.manifest, and so on. To be safe, I'd suggest making a backup of your Texturepacks folder before doing this. The sim will then load the texpacks in numerical order with KMCO being last. You should then see the yellow Spirit A319 at all airports where it appears in the schedule you are running.

What you are seeing is exactly what I explained in my post. At the moment, the only way to see the yellow A319 is to only load RC for KMCO.

Try turning the reflections setting off.

If you see "no free terminal" messages in your log file after a session that means not enough gates. Since the game engine loads 8 hours of flights, the "no free terminal" message is a byproduct. The only solution is to run the session using a schedule that only contains 2-3 hours worth of flights. I've been doing this since Tower!2011 and other schedule creators have now joined the bandwagon.

"VIR73 that you showed in the picture doesn't even fly to LAX anymore. VIR73 is now a 747 service from Manchester to Orlando." To be fair, time impacts all schedules - real traffic or custom. Just looking at the first 10 flights of Joe's LAX schedule that is only a few months old shows there have been quite a few changes: AAY335 - typically arrives in the afternoon versus midnight AAL1147 - B738 now instead of A321 CSN327 - typically arrives around 7pm versus near midnight SWA1207 - no longer a LAX flight SWA867 - no longer a LAX flight UAL815 - was an arrival, now is a departure flight using a B752 instead of a B739 NKS339 - A320 now instead of A319 ACA787 - B38M now instead of A320 GTI1820 - no change UAL1165 - no change I've been sitting on KPHX schedules for a couple of weeks waiting on the SP to be released and I know it is no longer "current". Schedules are like PC's, as soon as you get one you know something newer/better is out there. 🙂

It's a duplicate in the RT schedule.

Don't worry I trust you - I have to trust the person who taught me the word pedantic. 🙂

Good thoughts. The slow taxiing/exiting has been discussed ad nauseam and is very prevalent at various airports - KSFO being another obvious one. Landing distances have been discussed too - the problem now though if you adjust it for KLGA, everyone will exit at G when landing on 25R at KLAX. Since development on Tower!3D Pro is complete, we'll have to wait for the next version to possibly see enhancements like you suggest. But until then, we'll have to wait and see the "successfully landed" message before giving take-off clearance on crossing runways.

Actually, at this very minute everyone is departing from the eastern side because of storms to the west. However under normal circumstances and traffic, the destination will be the primary determinant for the departing runway. in gameplay (and what I see from most youtubers) we have a tendency to just use the closest runway to the gate for departures and that's just not reality and not a holistic view of realistic traffic management. But then, as some people say ... it's just a game.

If you have Pro - that path is incorrect. It should be Tower!3D Pro instead of Tower 3D. And that particular path is for Real Color and not the airport - the airport path should be c:\Program Files (x86)\FeelThere\Tower!3D Pro.

That's not the area we are talking about. The only "cargo" area currently available is Terminal_GA with only 10 gates. The cargo area mentioned by @BillA is the substantially larger cargo area on the south east part of KLAX used by FedEx & others. The attached image is one I posted on the forum over a year ago. The area circled in blue is what we see in Pro. The area circle in red is what is missing. With only the blue area implemented you can have some GA and cargo flights, but as it stands today and for the foreseeable future KLAX cannot handle realistic cargo/GA volumes.

I wish 🤑 What file or files are you speaking of? You may just need to update the access rights on all folders underneath Tower! 2011 in order to read/write/update.

I played an MP session at 16:00 and found the volume satisfying, but overall with RT most hours the traffic volume is less than 60. So, for those that are volume hungry or "experts" KMCO would probably require a custom schedule emphasizing higher (possibly unrealistic) traffic.

If you've built a schedule for Pro, then you've built a schedule for Tower!2011 - it is the same format. The schedule is in the ... \Tower! 2011\Databases folder. The filename is schedule.txt.

As you said, you answered your own question. This scenario is definitely one of the reasons why KPHL uses 27L for departures and 27R for arrivals when in west flow.

If you're not seeing it then it did not get installed in the good path. Screenshots of your folders will help determine the issue.

I'd recommend joining the Tower_MP Discord server, there are usually people online that can help with multiplayer setup & issues. https://forum.simflight.com/topic/83242-tower_mp-meeting-place-for-the-multiplayer-community/ It's possible that the IP addresses that you setup for port forwarding are incorrect or the actual IP addresses you are sharing are incorrect. And some routers and ISPs require another step to the setup process. If you are disconnecting using Hamachi, then you more than likely have network/ISP issues.

I wish I had a dollar for every time you said "I wish". 🙂

Then the forum is the right place to be. @FeelThere is good at sharing info and providing hints (and occasional sneak peaks) of upcoming releases. But one thing they don't do, and understandably so, is publish schedules/dates for SPs and new releases. So, if you watch the forum closely you'll have a good idea what may or may not be in the works. @AirJamaica has shared what FT has hinted regarding their pipleline. But we also have @nyergesdesign and @SimSmith Design (although he has been very quiet since KLGA was released) airports in the mix too. Oh happy day! 🙂

@nyergesdesign & @FeelThere, Thank you for the addition of the yellow Spirit airlines livery - it was something I quietly asked for quite a while ago. 🙂 https://forum.simflight.com/topic/83980-real-color-survey-new-liveries/ Unfortunately I stumbled across some bad news when excitedly looking for bright yellow colored airplanes. 😞 Sadly, the Spirit yellow A319 livery will only be visible to those that just use or have RC for KMCO. For those of us with multiple (or all) RC packs with earlier versions of the Spirit A319 we will more than likely still see the old white livery. Here is a screenshot of Terminal 3 with all RC packs loaded: Here is a screenshot of Terminal 3 with only RC for KMCO loaded: I assume this issue is caused by the order in which the RC packs are loaded, with common liveries being overlayed as each RC is loaded. Looking in the log file the order seems to be: airplanes_texpack1 (TIST) airplanes_texpack10 (KPHX) airplanes_texpack11 (KSFO) airplanes_texpack12 (EDDM) airplanes_texpack13 (KMCO) airplanes_texpack2 (KPHL) airplanes_texpack3 (KLAX) airplanes_texpack4 (KJFK) airplanes_texpack5 (KSAN) airplanes_texpack6 (KLAS) airplanes_texpack7 (KATL) airplanes_texpack8 (KBOS) airplanes_texpack9 (KLGA). With KMCO being loaded so early, the A319_nk from the other airports are overlaying it. Obviously there are multiple ways to fix the issue including changing the loading process, renumbering the texpacks with a leading zero to help the sort, update all the RC packs with the new A319 for Spirit, etc. You are smart, I'm sure you'll figure this out one way or another. Thanks, Craig

You can obviously change what you want ... but the B744s used by DLH and VIR are what actually fly in/out of KMCO today.

Be careful what you ask for. Considering the number of planes you delete in a session you better hope they let you delete tugs/vehicles too. 🙂

Yes, there is always an update when a new airport is published. That is how you get the new schedule (sp6v7).