Jump to content
The simFlight Network Forums

pete_agreatguy

Members
  • Content Count

    511
  • Joined

  • Days Won

    21

Everything posted by pete_agreatguy

  1. The amount of times I've considered using that hold position command instead of hold short of taxiway # lol Might revert to using that instead :)
  2. Hi all, Been doing a SP session on T3Dpro and came across aircraft getting stuck. See this screenshot. Log included. Air shuttle 6301 was instructed to taxi to runway 27R at E via taxiway's H, E. Southwest 237 landed on runway 26 and was instructed to taxi to terminal via A, D, H but to hold short of taxiway E so that the Air shuttle could pass. The southwest aircraft did hold short of E but the Air shuttle got stuck when going by. See screenshot linked above. output_log.txt
  3. Give that guy a bonus! Thank you @rameus
  4. It's happened to those that I have sent down that route. Here's another one doing it (AAL1784). Screenshot, log attached. If instructing to go via E rather than K, E1 or E2, they have no issues. Also, I had a southwest and another airliner do a 360 at this section at KBOS (screenshot). Same log file as attached. output_log.txt
  5. Hi all, I was playing SP today and using runways 22R and 22L. 22L for landings. I had an issue with Southwest 2106 getting stuck. After SWA2106 landed successfully, I issued the command "TAXI TO TERMINAL VIA C M K E2". He replied to acknowledge the command but did not move. After clicking on the aircraft, there was no taxi path showing. I issued the command again without success. At KBOS, there seems to be no link from K (near taxiway A / B) to the end of the terminal area (just past taxiway E2). Screenshot here. Log file attached. output_log.txt
  6. @crbascott, thanks for your reply. Regarding Photobucket, do you know of an alternate website where I can upload images for free? Otherwise, you'll have to install an adblocker. If you use the Chrome browser I recommend Adblock.
  7. Hi, I've been playing on KBOS a lot today and have noticed a couple of issues (could be bugs): 1) After landing on R32, I instructed AAL2126 to hold short of taxiway K; however the aircraft never did stop and ended up face to face with another aircraft (see this screenshot). 2) Any aircraft landing on R32, all aircraft stop prior to joining taxiway B without instruction to hold short (after taxi to terminal commands have been provided prior to this). See this screenshot. Informed No 2 is not a bug! Log file has been attached fo r both of these issues :) output_log.txt
  8. I don't use that manual. I use the one by Rameus found here :)
  9. @rameus, There are some commands missing from your version of the manual. This one for instance: CALLSIGN, WIND IS XXX (direction in degrees) AT XX KNOTS RUNWAY XX CLEARED FOR TAKEOFF
  10. I didn't know we could say that phrase! The manual needs updating ;)
  11. Hi all, I was doing a session just now at KPHL and I could not get a SpiritWings (NKS877) aircraft to taxi to runway 27L. I tried several routes and even a the very basic "runway 27L" via clicking with the mouse on the control panel. See this screenshot. I have attached my log file below. output_log.txt
  12. Understood and thank you :) At least I know it's a bug and not me doing something wrong with the commands.
  13. See my screenshot above @Peabody :) "COMMAND: NKS111 TAXI TO TERMINAL VIA A5 B C5 C3" The gate was on the right of the terminal (25R side) opposite the RAMPS for the cargo. I wanted to the C5 C3 to be a one way system :)
  14. Hi, Tonight I was having a go on KLAS and discovered a slight issue. See this screenshot for visual reference. I've attached my output log file as well. NKS111 landed fine on 25L, I instructed to taxi to terminal and then; taxi to terminal via A5, B, C5, C3 but he went via C7 for some reason even though I gave no C7 command at all. Log: Log file is attached :) output_log.txt
  15. Thanks @crbascott Your fix also helped me with my issue. My issue was TIST had no real airline traffic at the terminal or landing. Only GA traffic. Editing the file as described above fixed my issue. Thank you.
  16. If you are referring to the 1st issue, the images show the gate it happened at :) See the images :)
  17. The command for the cargo aircraft I am using "CALLSIGN RUNWAY NINER, TAXI VIA Foxtrot ... etc" I've attached the output_log from tonights game to this reply.output_log.txt
  18. Hi all, I want to report 3 issues I've noticed with this airport: 1) Gate Push back OR Taxi to runway issue: Situation = Skywest pushed back into the alley. Issued a command to taxi to R9 via B. Aircraft pushes back further in a weird way ... see the following images for a visual reference: image 1 | image 2 | image 3 2) Cargo aircraft Taxi to R9 issue ... When giving the command to taxi to R9 via F, C4, B4, B, B10 (shown with yellow arrows in screenshot below) ... the aircraft acknowledges the command but completely stays still. The cargo aircraft from the ramp can taxi down C, C6, B6, B to R9 without issues (after giving command taxi to R9). I managed to get another cargo plane to taxi to R9 via, C, D, B (as shown in the screenshot below). Screenshot 3) Cargo aircraft doing 360s prior to entering R9 when giving commands to line up and wait OR cleared for takeoff (the latter sometimes works but the former certainly happens all the time). See image 1 and image 2 I ran the bat file as admin and have provided the game log (attached). game.log
  19. Please get a mod to PIN this post! :D Huge thank you @rameus
  20. Hi all, I have recently bought Tower!3D PRO in the steam sale and am interested in making it a more realistic simulation. Does the real color series of addons for Tower3D also include the voice changes (i.e. airline callsigns etc) or do we have to purchase the "REAL TRAFFIC FOR TOWER!3D" separately?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. Guidelines Privacy Policy We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.