crbascott

Where is your KJFK folder located and what are its contents? Also, where is tower3d.exe located?

No - all those airlines are not in the game. The schedule file will tell you what airlines are in the game. The fourth field in the schedule file is the airline IATA code.

If you bought the bundle, the Lufthansa planes with liveries will be the A340, A346, and A388. KPHL has been updated since the original release of Real Traffic but KLAX has not. If you have RT SP6v4 you have the latest schedules for all the airports.

Or you already have the current version of all the software and the reason you see white planes is because you are using custom schedules.

When you use custom schedules that have planes that are not included in Real Color you are going to have white planes.

In an attempt to emulate the construction at LAX I built a scenario where 25R was closed and as a result I needed planes to be able to take off from 25L from the north complex and 24L from the south complex. As a result, I needed S to be the northern route and R to be the southern route. Unfortunately, getting a plane to take R was near impossible. Most attempts failed to calculate a route and when one did calculate it chose a very long and undesirable route. I've attached a screenshot and log file. Finally, I reverted back to 3.1 and got the route i desired on the first and only try. So, if 3.1 is the tortoise and 3.1d is the hare - give me the tortoise. output_log_lax31d.txt

Did you buy Tower!3D or Tower!3D Pro?

You did right, it is definitely a @nyergesdesign issue. The MD83 is in the RT schedule for KLAS, so it should have a prefab. Hopefully, it will get added soon.

This is a Real Traffic issue. There is no MD83 prefab in airplanes_pack1.manifest. This is causing the livery wrapping issue. Nyerges Design needs to add the MD83 into RT. @winsaudiare you sure that is an MD83? What version of RT are you running?

Been playing a little with 3.1d and really like the taxi improvements. However, I have run into one issue at KJFK For planes landing on 22L and 22R that need to go to terminal 8, the sim cannot calculate their route. I've tried issuing the generic TAXI TO RAMP command along with specific routes, but to no avail. This definitely worked prior to 3.1d as this airport is part of the latest challenge on Tower_MP. Attached it a log with an arrival on 22L and 22R. Thanks, Craig output_log.txt

With the recent updates, the terminal files are acting a little different than they did before. If you make the following edit to tist_terminal.txt in your TIST folder you should be good to go. This assumes one has Real Traffic. NEW Terminal_1: AAL,DAL,JBU,KAP,LIA,NKS,SBS,SCX,UAL Terminal_GA: GA OLD Terminal_1: Terminal_GA: GA

RT SP6v3 is the current version. Step 5 is the correct installation order. I'd recommend future purchases from FeelThere.com to ensure getting the most up to date version (plus they have sales).

LOL. It's tough to duplicate an exact day due to the many factors that can impact departures and arrivals. I've built some 1-2 hour challenges on the Discord server attempting to imitate real life but know it won't ever be exact. So, being pedantic is not an issue for me.

I knew somebody would hijack this thread and go there! ;)

Using the below as an example: In degrees, 081 is the direction the wind is coming from and, in knots, 7 is the wind speed. CALLSIGN, WIND IS 081 AT 7 KNOTS RUNWAY XX CLEARED FOR TAKEOFF

Are you using actual flight times or scheduled flight times? What is the purpose of your schedule? What is your definition of accuracy? And most importantly, what the heck does pedantic mean? ;)

Not even close to nonsense - http://forum.simflight.com/topic/84316-new-airport-request/?do=findComment&comment=509741

I was hoping for that - thanks!

OK, you must have an another issue then. Let's move this to DM and not hijack the 3.1 release thread. I sent you a message.

Of course! ;) Seriously though, KSAN loaded fine for me using my custom schedule, terminal, and GA file.

What does your KSAN terminal file look like? If you happened to remove the entry for Terminal_commuter, it looks like SP 3.1 requires that it be put back in. I had removed Terminal 6 from the KJFK terminal file and it got stuck at 63%. Adding it back in fixed the problem. Thanks to Velocty for helping to pinpoint the issue. I think the GA issue is playing havoc with TIST. It will load but it depends on the starting time you select.

Attached is the KLAS log. Due to the increased size of the log files - I had to include it in a separate post due to size constraints. output_log_noGA_KLAS.txt

Looks like SP 3.1 introduced a new bug where no GA traffic arrives or departs. Actually, the logic that places the planes at the gates is where the issue is (screenshot from KSAN shows a bunch of tugs but no planes in the GA area at all). I've attached log files for three sessions: KLAS - MP session using my new custom schedule for Friday at 13:00 KSAN - SP session using RT at 7:00 KPHX - MP session using RT at 15:00 I've also noticed the log files have increased in size with this latest release (a lot of duplicate road end messages). Thanks, Craig output_log_noGA_KPHX.txt output_log_noGA_KSAN.txt

I've never uninstalled and, again, never had any problems.

They may suggest it, but I have never found it be be necessary.